X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fdrivers%2Fao_cc115l.c;h=0fa1e899044a23fae470cbaa7ac1b9a657b84014;hb=2fa87754c5c11bb86e9b1878580c3d4f4b2463f5;hp=d6a938ac5c32a8fc0bf6152a08d7da0d64444389;hpb=985df526ec142258ef990d0b55b0a14e13c099b4;p=fw%2Faltos

diff --git a/src/drivers/ao_cc115l.c b/src/drivers/ao_cc115l.c
index d6a938ac..0fa1e899 100644
--- a/src/drivers/ao_cc115l.c
+++ b/src/drivers/ao_cc115l.c
@@ -245,6 +245,8 @@ ao_radio_idle(void)
 		uint8_t	state = ao_radio_strobe(CC115L_SIDLE);
 		if ((state >> CC115L_STATUS_STATE) == CC115L_STATUS_STATE_IDLE)
 			break;
+		if ((state >> CC115L_STATUS_STATE) == CC115L_STATUS_STATE_TX_FIFO_UNDERFLOW)
+			ao_radio_strobe(CC115L_SFTX);
 	}
 	/* Flush any pending TX bytes */
 	ao_radio_strobe(CC115L_SFTX);
@@ -328,11 +330,13 @@ static const uint16_t rdf_setup[] = {
 };
 
 /*
- * APRS deviation is the same as RDF
+ * APRS deviation is 3kHz
+ *
+ * 26e6 / (2 ** 17) * (8 + 7) * (2 ** 0) = 2975
  */
 
-#define APRS_DEV_E	RDF_DEV_E
-#define APRS_DEV_M	RDF_DEV_M
+#define APRS_DEV_E	0
+#define APRS_DEV_M	7
 
 /*
  * For our APRS beacon, set the symbol rate to 9.6kBaud (8x oversampling for 1200 baud data rate)
@@ -442,15 +446,10 @@ static const uint16_t radio_setup[] = {
 	AO_CC115L_DONE_INT_GPIO_IOCFG,	    CC115L_IOCFG_GPIO_CFG_PA_PD | (1 << CC115L_IOCFG_GPIO_INV),
 
         CC115L_FIFOTHR,                     0x47,       /* TX FIFO Thresholds */
-        CC115L_FREQ2,                       0x10,       /* Frequency Control Word, High Byte */
-        CC115L_FREQ1,                       0xb6,       /* Frequency Control Word, Middle Byte */
-        CC115L_FREQ0,                       0xa5,       /* Frequency Control Word, Low Byte */
-        CC115L_MDMCFG2,                     0x13,       /* Modem Configuration */
 	CC115L_MDMCFG1,			    (0x00 |
 					     (CC115L_MDMCFG1_NUM_PREAMBLE_4 << CC115L_MDMCFG1_NUM_PREAMBLE) |
 					     (1 << CC115L_MDMCFG1_CHANSPC_E)),
 	CC115L_MDMCFG0,			    248,	/* Channel spacing M value (100kHz channels) */
-        CC115L_DEVIATN,                     0x35,       /* Modem Deviation Setting */
         CC115L_MCSM0,                       0x38,       /* Main Radio Control State Machine Configuration */
         CC115L_RESERVED_0X20,               0xfb,       /* Use setting from SmartRF Studio */
         CC115L_FSCAL3,                      0xe9,       /* Frequency Synthesizer Calibration */
@@ -460,7 +459,6 @@ static const uint16_t radio_setup[] = {
         CC115L_TEST2,                       0x81,       /* Various Test Settings */
         CC115L_TEST1,                       0x35,       /* Various Test Settings */
         CC115L_TEST0,                       0x09,       /* Various Test Settings */
-	CC115L_PA,		     	    0x00,	/* Power setting (as low as possible) */
 };
 
 static uint8_t	ao_radio_configured = 0;
@@ -480,6 +478,8 @@ ao_radio_setup(void)
 
 	ao_config_get();
 
+	ao_radio_strobe(CC115L_SCAL);
+
 	ao_radio_configured = 1;
 }
 
@@ -498,7 +498,6 @@ static void
 ao_radio_get(void)
 {
 	static uint32_t	last_radio_setting;
-	static uint8_t	last_power_setting;
 
 	ao_mutex_get(&ao_radio_mutex);
 	if (!ao_radio_configured)
@@ -509,10 +508,6 @@ ao_radio_get(void)
 		ao_radio_reg_write(CC115L_FREQ0, ao_config.radio_setting);
 		last_radio_setting = ao_config.radio_setting;
 	}
-	if (ao_config.radio_power != last_power_setting) {
-		ao_radio_reg_write(CC115L_PA, ao_config.radio_power);
-		last_power_setting = ao_config.radio_power;
-	}
 }
 
 static void
@@ -618,6 +613,20 @@ ao_radio_rdf_abort(void)
 	ao_wakeup(&ao_radio_wake);
 }
 
+#define POWER_STEP	0x08
+
+static void
+ao_radio_stx(void)
+{
+	uint8_t	power;
+	ao_radio_pa_on();
+	ao_radio_reg_write(CC115L_PA, 0);
+	ao_radio_strobe(CC115L_STX);
+	for (power = POWER_STEP; power < ao_config.radio_power; power += POWER_STEP)
+		ao_radio_reg_write(CC115L_PA, power);
+	ao_radio_reg_write(CC115L_PA, ao_config.radio_power);
+}
+
 static void
 ao_radio_test_cmd(void)
 {
@@ -637,11 +646,10 @@ ao_radio_test_cmd(void)
 		ao_packet_slave_stop();
 #endif
 		ao_radio_get();
-		ao_radio_set_len(0xff);
-		ao_radio_set_mode(AO_RADIO_MODE_PACKET_TX | AO_RADIO_MODE_BITS_FIXED);
 		ao_radio_strobe(CC115L_SFTX);
-		ao_radio_pa_on();
-		ao_radio_strobe(CC115L_STX);
+		ao_radio_set_len(0xff);
+		ao_radio_set_mode(AO_RADIO_MODE_RDF);
+		ao_radio_stx();
 		radio_on = 1;
 	}
 	if (mode == 3) {
@@ -659,12 +667,14 @@ ao_radio_test_cmd(void)
 	}
 }
 
+#if CC115L_TRACE
 static inline int16_t
 ao_radio_gpio_bits(void)
 {
 	return AO_CC115L_DONE_INT_PORT->idr & ((1 << AO_CC115L_FIFO_INT_PIN) |
 					       (1 << AO_CC115L_DONE_INT_PIN));
 }
+#endif
 
 static void
 ao_radio_wait_fifo(void)
@@ -742,6 +752,10 @@ _ao_radio_send_lots(ao_radio_fill_func fill, uint8_t mode)
 	uint8_t	fifo_space;
 
 	fifo_space = CC115L_FIFO_SIZE;
+	ao_radio_abort = 0;
+
+	ao_radio_strobe(CC115L_SFTX);
+
 	ao_radio_done = 0;
 	ao_radio_fifo = 0;
 	while (!done) {
@@ -788,8 +802,7 @@ _ao_radio_send_lots(ao_radio_fill_func fill, uint8_t mode)
 			ao_exti_enable(AO_CC115L_DONE_INT_PORT, AO_CC115L_DONE_INT_PIN);
 
 			if (!started) {
-				ao_radio_pa_on();
-				ao_radio_strobe(CC115L_STX);
+				ao_radio_stx();
 				started = 1;
 			}
 		}