X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fcore%2Fao_data.h;h=7e2f85d8fb569894c09a75672f57f046df048007;hb=59f355f5288b42b2e47743d06e41e55819a55f64;hp=30208dfbdef780852b9df5646e88630ccf23532f;hpb=39c5738acdfdf0c87b64de6135fe107971cfa12b;p=fw%2Faltos

diff --git a/src/core/ao_data.h b/src/core/ao_data.h
index 30208dfb..7e2f85d8 100644
--- a/src/core/ao_data.h
+++ b/src/core/ao_data.h
@@ -52,6 +52,8 @@
 #define AO_DATA_MMA655X 0
 #endif
 
+#ifdef AO_DATA_RING
+
 #define AO_DATA_ALL	(AO_DATA_ADC|AO_DATA_MS5607|AO_DATA_MPU6000|AO_DATA_HMC5883|AO_DATA_MMA655X)
 
 struct ao_data {
@@ -65,6 +67,9 @@ struct ao_data {
 #endif
 #if HAS_MPU6000
 	struct ao_mpu6000_sample	mpu6000;
+#if !HAS_MMA655X
+	int16_t				z_accel;
+#endif
 #endif
 #if HAS_HMC5883
 	struct ao_hmc5883_sample	hmc5883;
@@ -95,6 +100,8 @@ extern volatile __data uint8_t		ao_data_count;
 		ao_sleep((void *) &ao_data_count);	\
 	} while (0)
 
+#endif /* AO_DATA_RING */
+
 #if !HAS_BARO && HAS_MS5607
 
 /* Either an MS5607 or an MS5611 hooked to a SPI port
@@ -103,7 +110,12 @@ extern volatile __data uint8_t		ao_data_count;
 #define HAS_BARO	1
 
 typedef int32_t	pres_t;
-typedef int32_t alt_t;
+
+#ifndef AO_ALT_TYPE
+#define AO_ALT_TYPE	int32_t
+#endif
+
+typedef AO_ALT_TYPE	alt_t;
 
 #define ao_data_pres_cook(packet)	ao_ms5607_convert(&packet->ms5607_raw, &packet->ms5607_cooked)
 
@@ -128,6 +140,10 @@ typedef int16_t alt_t;
 
 #endif
 
+#if !HAS_BARO
+typedef int16_t alt_t;
+#endif
+
 /*
  * Need a few macros to pull data from the sensors:
  *
@@ -265,11 +281,32 @@ typedef int16_t accel_t;
 typedef int16_t accel_t;
 
 /* MPU6000 is hooked up so that positive y is positive acceleration */
-#define ao_data_accel(packet)			((packet)->mpu6000.accel_y)
+#define ao_data_accel(packet)			((packet)->z_accel)
 #define ao_data_accel_cook(packet)		(-(packet)->mpu6000.accel_y)
-#define ao_data_set_accel(packet, accel)	((packet)->mpu6000.accel_y = (accel))
+#define ao_data_set_accel(packet, accel)	((packet)->z_accel = (accel))
 #define ao_data_accel_invert(a)			(-(a))
 
 #endif
 
+#if !HAS_GYRO && HAS_MPU6000
+
+#define HAS_GYRO	1
+
+typedef int16_t	gyro_t;
+typedef int32_t angle_t;
+
+/* Y axis is aligned with the direction of motion (along) */
+/* X axis is aligned in the other board axis (across) */
+/* Z axis is aligned perpendicular to the board (through) */
+
+#define ao_data_along(packet)	((packet)->mpu6000.accel_y)
+#define ao_data_across(packet)	((packet)->mpu6000.accel_x)
+#define ao_data_through(packet)	((packet)->mpu6000.accel_z)
+
+#define ao_data_roll(packet)	((packet)->mpu6000.gyro_y)
+#define ao_data_pitch(packet)	((packet)->mpu6000.gyro_x)
+#define ao_data_yaw(packet)	((packet)->mpu6000.gyro_z)
+
+#endif
+
 #endif /* _AO_DATA_H_ */