X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fcore%2Fao.h;h=080cadb2646dee8b1b5a1c317842097d5ff82e71;hb=cf1e4d60e1fcd75fa734365a2666ea8930938128;hp=8c5335c4bd73a86d9e9edb30a848f0cd18caa1e7;hpb=c6821ae734a7efaf2e069f6c5edf9605a9dbe125;p=fw%2Faltos diff --git a/src/core/ao.h b/src/core/ao.h index 8c5335c4..080cadb2 100644 --- a/src/core/ao.h +++ b/src/core/ao.h @@ -113,6 +113,7 @@ ao_start_scheduler(void); #define AO_PANIC_FLASH 9 /* Invalid flash part (or wrong blocksize) */ #define AO_PANIC_USB 10 /* Trying to send USB packet while busy */ #define AO_PANIC_BT 11 /* Communications with bluetooth device failed */ +#define AO_PANIC_STACK 12 /* Stack overflow */ /* Stop the operating system, beeping and blinking the reason */ void @@ -257,29 +258,33 @@ ao_beep_init(void); #define AO_LED_NONE 0 +#ifndef AO_LED_TYPE +#define AO_LED_TYPE uint8_t +#endif + /* Turn on the specified LEDs */ void -ao_led_on(uint8_t colors); +ao_led_on(AO_LED_TYPE colors); /* Turn off the specified LEDs */ void -ao_led_off(uint8_t colors); +ao_led_off(AO_LED_TYPE colors); /* Set all of the LEDs to the specified state */ void -ao_led_set(uint8_t colors); +ao_led_set(AO_LED_TYPE colors); /* Toggle the specified LEDs */ void -ao_led_toggle(uint8_t colors); +ao_led_toggle(AO_LED_TYPE colors); /* Turn on the specified LEDs for the indicated interval */ void -ao_led_for(uint8_t colors, uint16_t ticks) __reentrant; +ao_led_for(AO_LED_TYPE colors, uint16_t ticks) __reentrant; /* Initialize the LEDs */ void -ao_led_init(uint8_t enable); +ao_led_init(AO_LED_TYPE enable); /* * ao_usb.c @@ -389,42 +394,6 @@ uint8_t ao_cmd_filter(void); #endif -/* - * ao_dma.c - */ - -/* Allocate a DMA channel. the 'done' parameter will be set when the - * dma is finished and will be used to wakeup any waiters - */ - -uint8_t -ao_dma_alloc(__xdata uint8_t * done); - -/* Setup a DMA channel */ -void -ao_dma_set_transfer(uint8_t id, - void __xdata *srcaddr, - void __xdata *dstaddr, - uint16_t count, - uint8_t cfg0, - uint8_t cfg1); - -/* Start a DMA channel */ -void -ao_dma_start(uint8_t id); - -/* Manually trigger a DMA channel */ -void -ao_dma_trigger(uint8_t id); - -/* Abort a running DMA transfer */ -void -ao_dma_abort(uint8_t id); - -/* DMA interrupt routine */ -void -ao_dma_isr(void) ao_arch_interrupt(8); - /* * ao_mutex.c */ @@ -898,7 +867,7 @@ ao_dbg_init(void); #error Please define HAS_SERIAL_1 #endif -#if HAS_SERIAL_1 +#if HAS_SERIAL_1 | HAS_SERIAL_2 | HAS_SERIAL_3 #ifndef USE_SERIAL_STDIN #error Please define USE_SERIAL_STDIN #endif @@ -917,7 +886,7 @@ char ao_serial_pollchar(void) __critical; void -ao_serial_set_stdin(uint8_t stdin); +ao_serial_set_stdin(uint8_t in); #endif void @@ -971,47 +940,6 @@ ao_serial0_init(void); #endif -/* - * ao_spi.c - */ - -extern __xdata uint8_t ao_spi_mutex; - -#define ao_spi_get_mask(reg,mask) do {\ - ao_mutex_get(&ao_spi_mutex); \ - (reg) &= ~(mask); \ - } while (0) - -#define ao_spi_put_mask(reg,mask) do { \ - (reg) |= (mask); \ - ao_mutex_put(&ao_spi_mutex); \ - } while (0) - -#define ao_spi_get_bit(bit) do {\ - ao_mutex_get(&ao_spi_mutex); \ - (bit) = 0; \ - } while (0) - -#define ao_spi_put_bit(bit) do { \ - (bit) = 1; \ - ao_mutex_put(&ao_spi_mutex); \ - } while (0) - -/* - * The SPI mutex must be held to call either of these - * functions -- this mutex covers the entire SPI operation, - * from chip select low to chip select high - */ - -void -ao_spi_send(void __xdata *block, uint16_t len) __reentrant; - -void -ao_spi_recv(void __xdata *block, uint16_t len) __reentrant; - -void -ao_spi_init(void); - /* * ao_spi_slave.c */ @@ -1539,7 +1467,6 @@ ao_igniter_init(void); struct ao_radio_channel { char name[AO_CHANNEL_NAME_LEN]; uint32_t kHz; - uint32_t radio_setting; }; #endif @@ -1559,6 +1486,7 @@ struct ao_config { uint32_t radio_setting; /* minor version 7 */ uint8_t radio_enable; /* minor version 8 */ uint8_t aes_key[AO_AES_LEN]; /* minor version 9 */ + uint32_t frequency; /* minor version 10 */ #if HAS_RADIO_CHANNELS struct ao_radio_channel radio_channels[AO_NUM_CHANNELS]; /* minor version 10 */ #endif @@ -1959,4 +1887,12 @@ ao_battery_init(void); uint32_t ao_sqrt(uint32_t op); +/* + * ao_freq.c + */ + +int32_t ao_freq_to_set(int32_t freq, int32_t cal); + +#include + #endif /* _AO_H_ */