X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fcore%2Fao.h;h=080cadb2646dee8b1b5a1c317842097d5ff82e71;hb=cf1e4d60e1fcd75fa734365a2666ea8930938128;hp=86a943a8f1e832746191f44298eba1c838ac64ae;hpb=0cc01d378ae96325e429ad608b953661582939b0;p=fw%2Faltos

diff --git a/src/core/ao.h b/src/core/ao.h
index 86a943a8..080cadb2 100644
--- a/src/core/ao.h
+++ b/src/core/ao.h
@@ -258,29 +258,33 @@ ao_beep_init(void);
 
 #define AO_LED_NONE	0
 
+#ifndef AO_LED_TYPE
+#define AO_LED_TYPE uint8_t
+#endif
+
 /* Turn on the specified LEDs */
 void
-ao_led_on(uint8_t colors);
+ao_led_on(AO_LED_TYPE colors);
 
 /* Turn off the specified LEDs */
 void
-ao_led_off(uint8_t colors);
+ao_led_off(AO_LED_TYPE colors);
 
 /* Set all of the LEDs to the specified state */
 void
-ao_led_set(uint8_t colors);
+ao_led_set(AO_LED_TYPE colors);
 
 /* Toggle the specified LEDs */
 void
-ao_led_toggle(uint8_t colors);
+ao_led_toggle(AO_LED_TYPE colors);
 
 /* Turn on the specified LEDs for the indicated interval */
 void
-ao_led_for(uint8_t colors, uint16_t ticks) __reentrant;
+ao_led_for(AO_LED_TYPE colors, uint16_t ticks) __reentrant;
 
 /* Initialize the LEDs */
 void
-ao_led_init(uint8_t enable);
+ao_led_init(AO_LED_TYPE enable);
 
 /*
  * ao_usb.c
@@ -390,42 +394,6 @@ uint8_t
 ao_cmd_filter(void);
 #endif
 
-/*
- * ao_dma.c
- */
-
-/* Allocate a DMA channel. the 'done' parameter will be set when the
- * dma is finished and will be used to wakeup any waiters
- */
-
-uint8_t
-ao_dma_alloc(__xdata uint8_t * done);
-
-/* Setup a DMA channel */
-void
-ao_dma_set_transfer(uint8_t id,
-		    void __xdata *srcaddr,
-		    void __xdata *dstaddr,
-		    uint16_t count,
-		    uint8_t cfg0,
-		    uint8_t cfg1);
-
-/* Start a DMA channel */
-void
-ao_dma_start(uint8_t id);
-
-/* Manually trigger a DMA channel */
-void
-ao_dma_trigger(uint8_t id);
-
-/* Abort a running DMA transfer */
-void
-ao_dma_abort(uint8_t id);
-
-/* DMA interrupt routine */
-void
-ao_dma_isr(void) ao_arch_interrupt(8);
-
 /*
  * ao_mutex.c
  */
@@ -899,7 +867,7 @@ ao_dbg_init(void);
 #error Please define HAS_SERIAL_1
 #endif
 
-#if HAS_SERIAL_1
+#if HAS_SERIAL_1 | HAS_SERIAL_2 | HAS_SERIAL_3
 #ifndef USE_SERIAL_STDIN
 #error Please define USE_SERIAL_STDIN
 #endif
@@ -972,47 +940,6 @@ ao_serial0_init(void);
 #endif
 
 
-/*
- * ao_spi.c
- */
-
-extern __xdata uint8_t	ao_spi_mutex;
-
-#define ao_spi_get_mask(reg,mask) do {\
-	ao_mutex_get(&ao_spi_mutex); \
-	(reg) &= ~(mask); \
-	} while (0)
-
-#define ao_spi_put_mask(reg,mask) do { \
-	(reg) |= (mask); \
-	ao_mutex_put(&ao_spi_mutex); \
-	} while (0)
-
-#define ao_spi_get_bit(bit) do {\
-	ao_mutex_get(&ao_spi_mutex); \
-	(bit) = 0; \
-	} while (0)
-
-#define ao_spi_put_bit(bit) do { \
-	(bit) = 1; \
-	ao_mutex_put(&ao_spi_mutex); \
-	} while (0)
-
-/*
- * The SPI mutex must be held to call either of these
- * functions -- this mutex covers the entire SPI operation,
- * from chip select low to chip select high
- */
-
-void
-ao_spi_send(void __xdata *block, uint16_t len) __reentrant;
-
-void
-ao_spi_recv(void __xdata *block, uint16_t len) __reentrant;
-
-void
-ao_spi_init(void);
-
 /*
  * ao_spi_slave.c
  */
@@ -1966,4 +1893,6 @@ ao_sqrt(uint32_t op);
 
 int32_t ao_freq_to_set(int32_t freq, int32_t cal);
 
+#include <ao_arch_funcs.h>
+
 #endif /* _AO_H_ */