X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fcc1111%2Fao_serial.c;h=81727836d260e84ab88f3a1ae78c559296d9a525;hb=7b275ddfe20f54857d7d1abb98607c406b678090;hp=d5431070d7b430ab8a2095460855a353ea2db3c3;hpb=39594fdb3e30a1a25dd894c217e3d9d773bab972;p=fw%2Faltos

diff --git a/src/cc1111/ao_serial.c b/src/cc1111/ao_serial.c
index d5431070..81727836 100644
--- a/src/cc1111/ao_serial.c
+++ b/src/cc1111/ao_serial.c
@@ -34,8 +34,14 @@ const __code struct ao_serial_speed ao_serial_speeds[] = {
 		/* .baud = */ 59,
 		/* .gcr =  */ (11 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
 	},
+	/* [AO_SERIAL_SPEED_115200] = */ {
+		/* .baud = */ 59,
+		/* .gcr =  */ (12 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
+	},
 };
 
+#define AO_SERIAL_SPEED_MAX	AO_SERIAL_SPEED_115200
+
 #if HAS_SERIAL_0
 
 volatile __xdata struct ao_fifo	ao_serial0_rx_fifo;
@@ -85,10 +91,10 @@ ao_serial0_getchar(void) __critical
 }
 
 #if USE_SERIAL_0_STDIN
-char
-ao_serial0_pollchar(void) __critical
+int
+_ao_serial0_pollchar(void)
 {
-	char	c;
+	uint8_t	c;
 	if (ao_fifo_empty(ao_serial0_rx_fifo))
 		return AO_READ_AGAIN;
 	ao_fifo_remove(ao_serial0_rx_fifo,c);
@@ -116,7 +122,7 @@ void
 ao_serial0_set_speed(uint8_t speed)
 {
 	ao_serial0_drain();
-	if (speed > AO_SERIAL_SPEED_57600)
+	if (speed > AO_SERIAL_SPEED_MAX)
 		return;
 	U0UCR |= UxUCR_FLUSH;
 	U0BAUD = ao_serial_speeds[speed].baud;
@@ -135,7 +141,7 @@ ao_serial1_rx_isr(void) __interrupt 3
 	if (!ao_fifo_full(ao_serial1_rx_fifo))
 		ao_fifo_insert(ao_serial1_rx_fifo, U1DBUF);
 	ao_wakeup(&ao_serial1_rx_fifo);
-#if USE_SERIAL1_STDIN
+#if USE_SERIAL_1_STDIN
 	ao_wakeup(&ao_stdin_ready);
 #endif
 }
@@ -173,10 +179,10 @@ ao_serial1_getchar(void) __critical
 }
 
 #if USE_SERIAL_1_STDIN
-char
-ao_serial1_pollchar(void) __critical
+int
+_ao_serial1_pollchar(void)
 {
-	char	c;
+	uint8_t	c;
 	if (ao_fifo_empty(ao_serial1_rx_fifo))
 		return AO_READ_AGAIN;
 	ao_fifo_remove(ao_serial1_rx_fifo,c);
@@ -204,7 +210,7 @@ void
 ao_serial1_set_speed(uint8_t speed)
 {
 	ao_serial1_drain();
-	if (speed > AO_SERIAL_SPEED_57600)
+	if (speed > AO_SERIAL_SPEED_MAX)
 		return;
 	U1UCR |= UxUCR_FLUSH;
 	U1BAUD = ao_serial_speeds[speed].baud;
@@ -265,7 +271,7 @@ ao_serial_init(void)
 	IEN0 |= IEN0_URX0IE;
 	IEN2 |= IEN2_UTX0IE;
 #if USE_SERIAL_0_STDIN && !DELAY_SERIAL_0_STDIN
-	ao_add_stdio(ao_serial0_pollchar,
+	ao_add_stdio(_ao_serial0_pollchar,
 		     ao_serial0_putchar,
 		     NULL);
 #endif
@@ -292,7 +298,9 @@ ao_serial_init(void)
 
 	/* Make the USART pins be controlled by the USART */
 	P1SEL |= (1 << 6) | (1 << 7);
+#if HAS_SERIAL_1_HW_FLOW
 	P1SEL |= (1 << 5) | (1 << 4);
+#endif
 #endif
 
 	/* UART mode with receiver enabled */
@@ -319,7 +327,7 @@ ao_serial_init(void)
 	IEN2 |= IEN2_UTX1IE;
 
 #if USE_SERIAL_1_STDIN && !DELAY_SERIAL_1_STDIN
-	ao_add_stdio(ao_serial1_pollchar,
+	ao_add_stdio(_ao_serial1_pollchar,
 		     ao_serial1_putchar,
 		     NULL);
 #endif