X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fcc1111%2Fao_arch_funcs.h;h=d849655bb13c9dd910f05e9a12026c4c58f68624;hb=master;hp=5e2fc13db1ab808f8a6e5eda1607d5fe871626d5;hpb=a27b9b5c36cf748e415ba210c8d8ae72d8227a98;p=fw%2Faltos

diff --git a/src/cc1111/ao_arch_funcs.h b/src/cc1111/ao_arch_funcs.h
deleted file mode 100644
index 5e2fc13d..00000000
--- a/src/cc1111/ao_arch_funcs.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright © 2012 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-/*
- * ao_spi.c
- */
-
-extern __xdata uint8_t	ao_spi_mutex;
-
-#define AO_SPI_SPEED_FAST	17
-#define AO_SPI_SPEED_200kHz	13
-
-#define ao_spi_set_speed(speed) (U0GCR = (UxGCR_CPOL_NEGATIVE |		\
-					  UxGCR_CPHA_FIRST_EDGE |	\
-					  UxGCR_ORDER_MSB |		\
-					  ((speed) << UxGCR_BAUD_E_SHIFT)))
-
-#define ao_spi_get_slave(bus) do {			\
-		ao_mutex_get(&ao_spi_mutex);		\
-		ao_spi_set_speed(AO_SPI_SPEED_FAST);	\
-	} while (0)
-
-#define ao_spi_put_slave(bus) do {		\
-		ao_mutex_put(&ao_spi_mutex);	\
-	} while (0)
-
-#define ao_spi_get_mask(reg,mask,bus,speed) do {	\
-		ao_mutex_get(&ao_spi_mutex);		\
-		ao_spi_set_speed(speed);		\
-		(reg) &= ~(mask);			\
-	} while (0)
-
-#define ao_spi_put_mask(reg,mask,bus) do {		\
-	(reg) |= (mask); \
-	ao_mutex_put(&ao_spi_mutex); \
-	} while (0)
-
-
-#define ao_spi_get_bit(reg,bit,pin,bus,speed) do {	\
-		ao_mutex_get(&ao_spi_mutex);	\
-		ao_spi_set_speed(speed);	\
-		pin = 0;			\
-	} while (0)
-
-#define ao_spi_put_bit(reg,bit,pin,bus) do {	\
-		pin = 1;			\
-		ao_mutex_put(&ao_spi_mutex);	\
-	} while (0)
-
-
-/*
- * The SPI mutex must be held to call either of these
- * functions -- this mutex covers the entire SPI operation,
- * from chip select low to chip select high
- */
-
-void
-ao_spi_send_bus(void __xdata *block, uint16_t len) __reentrant;
-
-void
-ao_spi_recv_bus(void __xdata *block, uint16_t len) __reentrant;
-
-#define ao_spi_send(block, len, bus) ao_spi_send_bus(block, len)
-#define ao_spi_recv(block, len, bus) ao_spi_recv_bus(block, len)
-
-void
-ao_spi_init(void);
-
-#define ao_spi_init_cs(port, mask) do {		\
-		SPI_CS_PORT |= mask;		\
-		SPI_CS_DIR |= mask;		\
-		SPI_CS_SEL &= ~mask;		\
-	} while (0)
-
-#define cc1111_enable_output(port,dir,sel,pin,bit,v) do {	\
-		pin = v;					\
-		dir |= (1 << bit);				\
-		sel &= ~(1 << bit);				\
-	} while (0)
-
-#define disable_unreachable	_Pragma("disable_warning 126")
-
-#define token_paster(x,y)	x ## y
-#define token_evaluator(x,y)	token_paster(x,y)
-#define ao_enable_output(port,bit,pin,v) cc1111_enable_output(port,token_evaluator(port,DIR), token_evaluator(port,SEL), pin, bit, v)
-#define ao_gpio_set(port, bit, pin, v) ((pin) = (v))