X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Favr%2Fao_spi_usart.c;fp=src%2Favr%2Fao_spi_usart.c;h=6ed708ff38faf9d09e3eb44ff13ee33aea3bc5ee;hb=c32893ce79835a8f861d6ef414644c2ff9769ff6;hp=0000000000000000000000000000000000000000;hpb=8125acc030574afed6f23aa8aa302d9c768bb04e;p=fw%2Faltos

diff --git a/src/avr/ao_spi_usart.c b/src/avr/ao_spi_usart.c
new file mode 100644
index 00000000..6ed708ff
--- /dev/null
+++ b/src/avr/ao_spi_usart.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright © 2011 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include "ao.h"
+
+/*
+ * Atmega32u4 USART in MSPIM (master SPI mode)
+ */
+
+__xdata uint8_t	ao_spi_mutex;
+
+/* Send bytes over SPI.
+ *
+ * This just polls; the SPI is set to go as fast as possible,
+ * so using interrupts would take way too long
+ */
+void
+ao_spi_send(void __xdata *block, uint16_t len) __reentrant
+{
+	uint8_t	*d = block;
+
+	ao_mutex_get(&ao_spi_mutex);
+	while (len--) {
+		while (!(UCSR1A & (1 << UDRE1)));
+		UDR1 = *d++;
+		while (!(UCSR1A & (1 << RXC1)));
+		(void) UDR1;
+	}
+	ao_mutex_put(&ao_spi_mutex);
+}
+
+/* Receive bytes over SPI.
+ *
+ * This sets up tow DMA engines, one reading the data and another
+ * writing constant values to the SPI transmitter as that is what
+ * clocks the data coming in.
+ */
+void
+ao_spi_recv(void __xdata *block, uint16_t len) __reentrant
+{
+	uint8_t	*d = block;
+
+	ao_mutex_get(&ao_spi_mutex);
+	while (len--) {
+		while (!(UCSR1A & (1 << UDRE1)));
+		UDR1 = 0;
+		while (!(UCSR1A & (1 << RXC1)));
+		*d++ = UDR1;
+	}
+	ao_mutex_put(&ao_spi_mutex);
+}
+
+/*
+ * Initialize USART0 for SPI using config alt 2
+ *
+ * 	MO	P1_5
+ * 	MI	P1_4
+ * 	CLK	P1_3
+ *
+ * Chip select is the responsibility of the caller
+ */
+
+#define XCK1_DDR	DDRD
+#define XCK1_PORT	PORTD
+#define XCK1		PORTD5
+#define XMS1_DDR	DDRE
+#define XMS1_PORT	PORTE
+#define XMS1		PORTE6
+
+void
+ao_spi_init(void)
+{
+	/* Ensure the USART is powered */
+	PRR1 &= ~(1 << PRUSART1);
+
+	/*
+	 * Set pin directions
+	 */
+	XCK1_DDR |= (1 << XCK1);
+
+	/* Clear chip select (which is negated) */
+	XMS1_PORT |= (1 < XMS1);
+	XMS1_DDR |= (1 << XMS1);
+
+	/* Set baud register to zero (required before turning transmitter on) */
+	UBRR1 = 0;
+
+	UCSR1C = ((0x3 << UMSEL10) |	/* Master SPI mode */
+		  (0 << UCSZ10) |	/* SPI mode 0 */
+		  (0 << UCPOL1));	/* SPI mode 0 */
+
+	/* Enable transmitter and receiver */
+	UCSR1B = ((1 << RXEN1) |
+		  (1 << TXEN1));
+
+	/* It says that 0 is a legal value; we'll see... */
+	UBRR1 = 0;
+}