X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fao_flash.c;h=4f3618ee1ca3214286c00f1230302a8577ca8b31;hb=f3f1b1488bdc92fa9277dc549ba9f3210a8d4c8c;hp=01d371bbeeb12ed6b8b89629393949cfd94a8ed2;hpb=05e5bb2d330b755967d06fb859585c81f5f5fbb5;p=fw%2Faltos diff --git a/src/ao_flash.c b/src/ao_flash.c index 01d371bb..4f3618ee 100644 --- a/src/ao_flash.c +++ b/src/ao_flash.c @@ -18,22 +18,11 @@ #include "ao.h" #include "at45db161d.h" -/* - * Using SPI on USART 0, with P1_1 as the chip select - */ - #define FLASH_CS P1_1 #define FLASH_CS_INDEX 1 -__xdata uint8_t ao_flash_dma_in_done; -__xdata uint8_t ao_flash_dma_out_done; __xdata uint8_t ao_flash_mutex; -uint8_t ao_flash_dma_out_id; -uint8_t ao_flash_dma_in_id; - -static __xdata uint8_t ao_flash_const = 0xff; - #define ao_flash_delay() do { \ _asm nop _endasm; \ _asm nop _endasm; \ @@ -54,83 +43,6 @@ void ao_flash_cs_high(void) ao_flash_delay(); } -/* Send bytes over SPI. - * - * This sets up two DMA engines, one writing the data and another reading - * bytes coming back. We use the bytes coming back to tell when the transfer - * is complete, as the transmit register is double buffered and hence signals - * completion one byte before the transfer is actually complete - */ -static void -ao_flash_send(void __xdata *block, uint16_t len) -{ - ao_dma_set_transfer(ao_flash_dma_in_id, - &U0DBUFXADDR, - &ao_flash_const, - len, - DMA_CFG0_WORDSIZE_8 | - DMA_CFG0_TMODE_SINGLE | - DMA_CFG0_TRIGGER_URX0, - DMA_CFG1_SRCINC_0 | - DMA_CFG1_DESTINC_0 | - DMA_CFG1_PRIORITY_NORMAL); - - ao_dma_set_transfer(ao_flash_dma_out_id, - block, - &U0DBUFXADDR, - len, - DMA_CFG0_WORDSIZE_8 | - DMA_CFG0_TMODE_SINGLE | - DMA_CFG0_TRIGGER_UTX0, - DMA_CFG1_SRCINC_1 | - DMA_CFG1_DESTINC_0 | - DMA_CFG1_PRIORITY_NORMAL); - - ao_dma_start(ao_flash_dma_in_id); - ao_dma_start(ao_flash_dma_out_id); - ao_dma_trigger(ao_flash_dma_out_id); - __critical while (!ao_flash_dma_in_done) - ao_sleep(&ao_flash_dma_in_done); -} - -/* Receive bytes over SPI. - * - * This sets up tow DMA engines, one reading the data and another - * writing constant values to the SPI transmitter as that is what - * clocks the data coming in. - */ -static void -ao_flash_recv(void __xdata *block, uint16_t len) -{ - ao_dma_set_transfer(ao_flash_dma_in_id, - &U0DBUFXADDR, - block, - len, - DMA_CFG0_WORDSIZE_8 | - DMA_CFG0_TMODE_SINGLE | - DMA_CFG0_TRIGGER_URX0, - DMA_CFG1_SRCINC_0 | - DMA_CFG1_DESTINC_1 | - DMA_CFG1_PRIORITY_NORMAL); - - ao_dma_set_transfer(ao_flash_dma_out_id, - &ao_flash_const, - &U0DBUFXADDR, - len, - DMA_CFG0_WORDSIZE_8 | - DMA_CFG0_TMODE_SINGLE | - DMA_CFG0_TRIGGER_UTX0, - DMA_CFG1_SRCINC_0 | - DMA_CFG1_DESTINC_0 | - DMA_CFG1_PRIORITY_NORMAL); - - ao_dma_start(ao_flash_dma_in_id); - ao_dma_start(ao_flash_dma_out_id); - ao_dma_trigger(ao_flash_dma_out_id); - __critical while (!ao_flash_dma_in_done) - ao_sleep(&ao_flash_dma_in_done); -} - struct ao_flash_instruction { uint8_t instruction; uint8_t address[3]; @@ -144,7 +56,7 @@ ao_flash_set_pagesize_512(void) ao_flash_instruction.address[0] = FLASH_SET_512_BYTE_0; ao_flash_instruction.address[1] = FLASH_SET_512_BYTE_1; ao_flash_instruction.address[2] = FLASH_SET_512_BYTE_2; - ao_flash_send(&ao_flash_instruction, 4); + ao_spi_send(&ao_flash_instruction, 4); ao_flash_cs_high(); } @@ -154,8 +66,8 @@ ao_flash_read_status(void) { ao_flash_cs_low(); ao_flash_instruction.instruction = FLASH_READ_STATUS; - ao_flash_send(&ao_flash_instruction, 1); - ao_flash_recv(&ao_flash_instruction, 1); + ao_spi_send(&ao_flash_instruction, 1); + ao_spi_recv(&ao_flash_instruction, 1); ao_flash_cs_high(); return ao_flash_instruction.instruction; } @@ -169,6 +81,7 @@ static __pdata uint8_t ao_flash_write_pending; static __pdata uint8_t ao_flash_setup_done; static __data uint32_t ao_flash_device_size; static __data uint8_t ao_flash_block_shift; +static __data uint16_t ao_flash_block_size; static void ao_flash_setup(void) @@ -183,7 +96,6 @@ ao_flash_setup(void) ao_mutex_put(&ao_flash_mutex); return; } - ao_flash_setup_done = 1; /* On first use, check to see if the flash chip has * been programmed to use 512 byte pages. If not, do so. @@ -238,6 +150,8 @@ ao_flash_setup(void) default: ao_panic(AO_PANIC_FLASH); } + ao_flash_block_size = 1 << ao_flash_block_shift; + ao_flash_setup_done = 1; ao_mutex_put(&ao_flash_mutex); } @@ -266,8 +180,8 @@ ao_flash_write_block(void) ao_flash_instruction.address[0] = ao_flash_block >> (16 - ao_flash_block_shift); ao_flash_instruction.address[1] = ao_flash_block << (ao_flash_block_shift - 8); ao_flash_instruction.address[2] = 0; - ao_flash_send(&ao_flash_instruction, 4); - ao_flash_send(ao_flash_data, FLASH_BLOCK_SIZE); + ao_spi_send(&ao_flash_instruction, 4); + ao_spi_send(ao_flash_data, FLASH_BLOCK_SIZE); ao_flash_cs_high(); ao_flash_write_pending = 1; } @@ -284,8 +198,8 @@ ao_flash_read_block(void) ao_flash_instruction.address[0] = ao_flash_block >> (16 - ao_flash_block_shift); ao_flash_instruction.address[1] = ao_flash_block << (ao_flash_block_shift - 8); ao_flash_instruction.address[2] = 0; - ao_flash_send(&ao_flash_instruction, 4); - ao_flash_recv(ao_flash_data, FLASH_BLOCK_SIZE); + ao_spi_send(&ao_flash_instruction, 4); + ao_spi_recv(ao_flash_data, FLASH_BLOCK_SIZE); ao_flash_cs_high(); } @@ -397,6 +311,7 @@ ao_ee_flush(void) __reentrant * Read/write the config block, which is in * the last block of the flash */ + uint8_t ao_ee_write_config(uint8_t *buf, uint16_t len) __reentrant { @@ -404,7 +319,6 @@ ao_ee_write_config(uint8_t *buf, uint16_t len) __reentrant if (len > FLASH_BLOCK_SIZE) return 0; ao_mutex_get(&ao_flash_mutex); { - printf("FLASH_CONFIG_BLOCK: %d\n", FLASH_CONFIG_BLOCK); ao_flash_fill(FLASH_CONFIG_BLOCK); memcpy(ao_flash_data, buf, len); ao_flash_block_dirty = 1; @@ -481,6 +395,29 @@ flash_store(void) __reentrant ao_ee_flush(); } +void +ao_ee_dump_config(void) __reentrant +{ + uint16_t i; + printf("Configuration block %d\n", FLASH_CONFIG_BLOCK); + ao_mutex_get(&ao_flash_mutex); { + ao_flash_flush_internal(); + ao_flash_block = FLASH_BLOCK_NONE; + ao_flash_fill(FLASH_CONFIG_BLOCK); + i = 0; + do { + if ((i & 7) == 0) { + if (i) + putchar('\n'); + ao_cmd_put16((uint16_t) i); + } + putchar(' '); + ao_cmd_put8(ao_flash_data[i]); + ++i; + } while (i < sizeof (ao_config)); + } ao_mutex_put(&ao_flash_mutex); +} + static void flash_status(void) __reentrant { @@ -497,6 +434,7 @@ flash_status(void) __reentrant printf ("Flash data size: %ld\n", FLASH_DATA_SIZE); printf ("Flash config block: %d\n", FLASH_CONFIG_BLOCK); } ao_mutex_put(&ao_flash_mutex); + ao_ee_dump_config(); } __code struct ao_cmds ao_flash_cmds[] = { @@ -517,40 +455,5 @@ ao_ee_init(void) FLASH_CS = 1; P1DIR |= (1 << FLASH_CS_INDEX); P1SEL &= ~(1 << FLASH_CS_INDEX); - - /* Set up the USART pin assignment */ - PERCFG = (PERCFG & ~PERCFG_U0CFG_ALT_MASK) | PERCFG_U0CFG_ALT_2; - - /* Ensure that USART0 takes precidence over USART1 for pins that - * they share - */ - P2SEL = (P2SEL & ~P2SEL_PRI3P1_MASK) | P2SEL_PRI3P1_USART0; - - /* Make the SPI pins be controlled by the USART peripheral */ - P1SEL |= ((1 << 5) | (1 << 4) | (1 << 3)); - - /* Set up OUT DMA */ - ao_flash_dma_out_id = ao_dma_alloc(&ao_flash_dma_out_done); - - /* Set up IN DMA */ - ao_flash_dma_in_id = ao_dma_alloc(&ao_flash_dma_in_done); - - /* Set up the USART. - * - * SPI master mode - */ - U0CSR = (UxCSR_MODE_SPI | UxCSR_RE | UxCSR_MASTER); - - /* Set the baud rate and signal parameters - * - * The cc1111 is limited to a 24/8 MHz SPI clock, - * while the at45db161d.h is limited to 20MHz. So, - * use the 3MHz clock (BAUD_E 17, BAUD_M 0) - */ - U0BAUD = 0; - U0GCR = (UxGCR_CPOL_NEGATIVE | - UxGCR_CPHA_FIRST_EDGE | - UxGCR_ORDER_MSB | - (17 << UxGCR_BAUD_E_SHIFT)); ao_cmd_register(&ao_flash_cmds[0]); }