X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=packages%2FNICHICON_WT_CAP_10_10.fp;fp=packages%2FNICHICON_WT_CAP_10_10.fp;h=ebefcf2504507a8afe290847c2c7687d4a9e6376;hb=b556830ac85a5d2a14a06063dc8c17bb8c9ca5a3;hp=0000000000000000000000000000000000000000;hpb=4141c6abd70ddf848eda454d9bc53c23af682c4d;p=hw%2Fcncfpga

diff --git a/packages/NICHICON_WT_CAP_10_10.fp b/packages/NICHICON_WT_CAP_10_10.fp
new file mode 100644
index 0000000..ebefcf2
--- /dev/null
+++ b/packages/NICHICON_WT_CAP_10_10.fp
@@ -0,0 +1,34 @@
+	# max pin width (perpendicular to axis of package) (1/100 mil)
+	# max pin length (parallel to axis of package) (1/100 mil)
+	# gap between the pads (1/100 mil)
+	# package width (1/100 mil)
+	# package height (1/100 mil)
+	# component veritcal height off board (1/100 mil)
+	# pad width and length
+	# y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
+	# we need a line segment of length PADL - PADW so we have end points:
+	# 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
+	# width of soldermask relief (5 mil on each side)
+	# silkscreen width (1/100 mils)
+	# how much space to leave around the part before the
+	# silk screen (1/100 mils)
+	# lower left corner for silk screen (1/100 mil)
+	# upper right corner for silk screen (1/100 mil)
+	# how much to notch the corners by in silk to indicate polarity
+# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
+Element[ "" "Description_nichicon_NICHICON_WT_CAP_10_10" "" "`NICHICON_WT_CAP_10_10'" 0 0 0 0 0 100 ""]
+(
+# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
+Pad[ 0 -20078 0 -11023 6330 1000 7330 "Plus"  "1" "square"]
+Pad[ 0  20078 0  11023 6330 1000 7330 "Minus" "2" "square"]
+# Silk screen around package
+# ElementLine[ x1 y1 x2 y2 width]
+ElementLine[ 21969    21969     4465    21969    1000]
+ElementLine[ 21969    21969     21969    -18969 1000]
+ElementLine[ 21969    -18969  18969 -21969    1000]
+ElementLine[ 18969 -21969     4465    -21969    1000]
+ElementLine[ -21969    21969    -4465    21969    1000]
+ElementLine[ -21969    21969    -21969    -18969 1000]
+ElementLine[ -21969    -18969 -18969 -21969    1000]
+ElementLine[ -18969 -21969    -4465    -21969    1000]
+)