X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=packages%2FMO-220.py;h=70bd25a0c85079f4112ccafb76681e2d0fb5a0c2;hb=3034dc83f6095f1df20523b07cdba7f252341c3f;hp=5319e5a3f4a7856989324e231561b561123b8994;hpb=14289403c8e193e10a174fde02030028b6f7bbb1;p=hw%2Faltusmetrum

diff --git a/packages/MO-220.py b/packages/MO-220.py
old mode 100755
new mode 100644
index 5319e5a..70bd25a
--- a/packages/MO-220.py
+++ b/packages/MO-220.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python2
+#!/usr/bin/python3
 # Copyright 2011 by Bdale Garbee <bdale@gag.com>.  GPLv2
 #
 # Program to emit PCB footprint for MO-220 package used by the ATTiny85
@@ -26,16 +26,16 @@ import sys
 def mm2mils100( mm ):
 	return int( mm / 25.4 * 1000.0 * 100.0 + 0.5 )
 
-print '# author: Keith Packard'
-print '# email: keithp@keithp.com'
-print '# dist-license: GPL 2'
-print '# use-license: unlimited'
+print('# author: Keith Packard')
+print('# email: keithp@keithp.com')
+print('# dist-license: GPL 3')
+print('# use-license: unlimited')
 
-print 'Element[0x0 "MO-220" "" "" 0 0 0 0 0 100 0x0]'
-print "("
+print('Element[0x0 "MO-220" "" "" 0 0 0 0 0 100 0x0]')
+print("(")
 
 # pad under the chip, must be grounded
-print '   Pad[',\
+print('   Pad[',\
  	mm2mils100(0), \
 	mm2mils100(0), \
  	mm2mils100(0), \
@@ -43,12 +43,12 @@ print '   Pad[',\
 	mm2mils100(GndSquare), \
 	mm2mils100(PinClearance), \
 	mm2mils100(PinResist), \
-	'"pin21" "21" "square,nopaste"]'
+	'"pin21" "21" "square,nopaste"]')
 
 # vias in the ground pad under the chip
 #for viarow in range (-1,2):
 #  for viacol in range (-1,2):
-#    print '   Pin[',\
+#    print('   Pin[',\
 #	mm2mils100(2 * viacol * CoreSquare / 5), \
 # 	mm2mils100(2 * viarow * CoreSquare / 5), \
 #	2900, \
@@ -65,7 +65,7 @@ for viarow in range (-1, 2):
   for viacol in range (-1, 2):
     if (viarow in (-1, 1)) and (viacol in (-1, 1)):
       # copper sub-square with resist over vias
-      print '   Pad[',\
+      print('   Pad[',\
 	mm2mils100(viacol * CoreSquare / blocks), \
  	mm2mils100(viarow * CoreSquare / blocks), \
 	mm2mils100(viacol * CoreSquare / blocks), \
@@ -73,10 +73,10 @@ for viarow in range (-1, 2):
 	mm2mils100((CoreSquare)/blocks), \
 	0, \
  	0, \
-	'"pin21" "21" "square,nopaste"]'
+	'"pin21" "21" "square,nopaste"]')
     else:
       # copper sub-square without resist
-      print '   Pad[',\
+      print('   Pad[',\
 	mm2mils100(viacol * CoreSquare / blocks), \
  	mm2mils100(viarow * CoreSquare / blocks), \
 	mm2mils100(viacol * CoreSquare / blocks), \
@@ -84,9 +84,9 @@ for viarow in range (-1, 2):
 	mm2mils100((CoreSquare)/blocks), \
 	0, \
 	mm2mils100((CoreSquare)/blocks), \
-	'"pin21" "21" "square,nopaste"]'
+	'"pin21" "21" "square,nopaste"]')
       # copper spot to control paste mask generation
-      print '   Pad[',\
+      print('   Pad[',\
 	mm2mils100(viacol * CoreSquare / blocks), \
  	mm2mils100(viarow * CoreSquare / blocks), \
 	mm2mils100(viacol * CoreSquare / blocks), \
@@ -94,11 +94,11 @@ for viarow in range (-1, 2):
   	1500, \
 	0, \
 	mm2mils100((CoreSquare)/blocks), \
-	'"pin21" "21" "square"]'
+	'"pin21" "21" "square"]')
 
 # pins
 for pin in range (1,6):
-    print '   Pad[',\
+    print('   Pad[',\
  	mm2mils100((-3 + pin) * PinSpacing), \
 	mm2mils100(-Overall/2 + PinWidth/2), \
  	mm2mils100((-3 + pin) * PinSpacing), \
@@ -106,9 +106,9 @@ for pin in range (1,6):
 	mm2mils100(PinWidth), \
 	mm2mils100(PinClearance), \
 	mm2mils100(PinResist), \
-	'"pin%i"' % (16-pin), '"%i"' % (16-pin), '0x0000]'
+	'"pin%i"' % (16-pin), '"%i"' % (16-pin), '0x0000]')
 
-    print '   Pad[',\
+    print('   Pad[',\
  	mm2mils100((-3 + pin) * PinSpacing), \
 	mm2mils100(+Overall/2 - PinHeight + PinWidth/2), \
  	mm2mils100((-3 + pin) * PinSpacing), \
@@ -116,9 +116,9 @@ for pin in range (1,6):
 	mm2mils100(PinWidth), \
 	mm2mils100(PinClearance), \
 	mm2mils100(PinResist), \
-	'"pin%i"' % pin, '"%i"' % pin, '0x0000]'
+	'"pin%i"' % pin, '"%i"' % pin, '0x0000]')
       
-    print '   Pad[',\
+    print('   Pad[',\
 	mm2mils100(Overall/2 - PinHeight + PinWidth/2), \
  	mm2mils100((-3 + pin) * PinSpacing), \
 	mm2mils100(Overall/2 - PinWidth/2), \
@@ -126,9 +126,9 @@ for pin in range (1,6):
 	mm2mils100(PinWidth), \
 	mm2mils100(PinClearance), \
 	mm2mils100(PinResist), \
-	'"pin%i"' % (11-pin), '"%i"' % (11-pin), '0x0000]'
+	'"pin%i"' % (11-pin), '"%i"' % (11-pin), '0x0000]')
 
-    print '   Pad[',\
+    print('   Pad[',\
 	mm2mils100(-Overall/2 + PinWidth/2), \
  	mm2mils100((-3 + pin) * PinSpacing), \
 	mm2mils100(-Overall/2 + PinHeight - PinWidth/2), \
@@ -136,10 +136,10 @@ for pin in range (1,6):
 	mm2mils100(PinWidth), \
 	mm2mils100(PinClearance), \
 	mm2mils100(PinResist), \
-	'"pin%i"' % (15+pin), '"%i"' % (15+pin), '0x0000]'
+	'"pin%i"' % (15+pin), '"%i"' % (15+pin), '0x0000]')
 
-print '   ElementArc[',\
+print('   ElementArc[',\
 	mm2mils100(-2.0), \
 	mm2mils100(2.0), \
-	'500 500 0 360 1000 ]'
-print ")"
+	'500 500 0 360 1000 ]')
+print(")")