X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=packages%2F0603diode.fp;fp=packages%2F0603diode.fp;h=331ea1c561244e55a0a7591f1e54c4bd78b7da94;hb=b003fc2789f915ff4c56057d43f517b993e78237;hp=0000000000000000000000000000000000000000;hpb=1e47ffe4ab98880e6424d91086c203bbca5b7c32;p=hw%2Fteleshield

diff --git a/packages/0603diode.fp b/packages/0603diode.fp
new file mode 100644
index 0000000..331ea1c
--- /dev/null
+++ b/packages/0603diode.fp
@@ -0,0 +1,36 @@
+	# grab the input values and convert to 1/100 mil
+	# how much to grow the pads by for soldermask [1/100 mil]
+	# clearance from planes [1/100 mil]
+	# silk screen width  [1/100 mil]
+	# courtyard silk screen width  [1/100 mil]
+# element_flags, description, pcb-name, value, mark_x, mark_y,
+# text_x, text_y, text_direction, text_scale, text_flags
+Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0603" 0 0 -3150 -3150 0 100 ""]
+(
+# 
+# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
+	Pad[-2559 -492
+		-2559 492
+		2952 2000 3552 "1" "1" "square"]
+	    Pad[2559 -492
+		2559 492
+		2952 2000 3552 "2" "2" "square"]
+
+#   ElementLine[ -4300 -2300 -4300 2300 1000 ]
+#   ElementLine[ -4300 2300 4500 2300 1000 ]
+#   ElementLine[ 4500 2300 4500 -2300 1000 ]
+#   ElementLine[ 4500 -2300 -4300 -2300 1000 ]
+   ElementLine[ 4700 2500 4700 -2500 1000 ]
+   ElementLine[ 4700 2500 3700 2500 1000 ]
+   ElementLine[ 4700 -2500 3700 -2500 1000 ]
+
+#
+# This draws a 1 mil placement courtyard outline in silk.  It should probably
+# not be included since you wont want to try and fab a 1 mil silk line.  Then
+# again, it is most useful during parts placement.  It really is time for some
+# additional non-fab layers...
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+#	ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
+#	ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
+)