+
+Contents
+
+- STM32F10x Standard Peripherals Library
+Drivers update History
+- License
+
+
+
+STM32F10x Standard
+Peripherals Library Drivers update History3.3.0
+- 04/16/2010
+- General
+- Add support for STM32F10x XL-density devices.
- I2C driver: events description and management enhancement.
+- STM32F10x_StdPeriph_Driver
+- stm32f10x_dbgmcu.h/.c
- DBGMCU_Config() function: add new values DBGMCU_TIMx_STOP (x: 9..14) for DBGMCU_Periph parameter.
- stm32f10x_flash.h/.c:
+updated to support Bank2 of XL-density devices (up to 1MByte of Flash
+memory). For more details, refer to the description provided within
+stm32f10x_flash.c file.
- stm32f10x_gpio.h/.c
- GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for FSMC_NADV pin and TIM9..11,13,14.
- stm32f10x_i2c.h/.c: I2C events description and management enhancement.
- I2C_CheckEvent()
+function: updated to check whether the last event contains the
+I2C_EVENT (instead of check whether the last event is equal to
+I2C_EVENT)
- Add
+detailed description of I2C events and how to manage them using the
+functions provided by this driver. For more information, refer to
+stm32f10x_i2c.h and stm32f10x_i2c.c files.
- stm32f10x_rcc.h/.c: updated to support TIM9..TIM14 APB clock and reset configuration
- stm32f10x_tim.h/.c: updated to support new Timers TIM9..TIM14.
- stm32f10x_sdio.h:
- SDIO_SetSDIOReadWaitMode() function: correct values of SDIO_ReadWaitMode parameter
change
+#define
+SDIO_ReadWaitMode_CLK
+ ((uint32_t)0x00000000) #define
+SDIO_ReadWaitMode_DATA2
+((uint32_t)0x00000001) by #define
+SDIO_ReadWaitMode_CLK
+ ((uint32_t)0x00000001) #define
+SDIO_ReadWaitMode_DATA2
+((uint32_t)0x00000000)
+3.2.0
+- 03/01/2010
+
+- General
+
+
+
+- Add support
+for STM32 Low-density Value line (STM32F100x4/6) and
+Medium-density Value line (STM32F100x8/B) devices.
+ - Almost
+peripherals drivers were updated to support Value
+line devices features
+ - Drivers limitations fix and enhancements.
+
+
+
+- STM32F10x_StdPeriph_Driver
+
+
+- Add new
+firmware driver for CEC peripheral: stm32f10x_cec.h and stm32f10x_cec.c
+ - Timers drivers stm32f10x_tim.h/.c: add support for new General Purpose Timers: TIM15, TIM16 and TIM17.
+ - RCC driver: add support for new Value peripherals: HDMI-CEC, TIM15, TIM16 and TIM17.
+ - GPIO driver: add new remap parameters for TIM1, TIM15, TIM16, TIM17 and HDMI-CEC: GPIO_Remap_TIM1_DMA, GPIO_Remap_TIM15, GPIO_Remap_TIM16, GPIO_Remap_TIM17, GPIO_Remap_CEC.
+ - USART
+driver: add support for Oversampling by 8 mode and onebit method. 2
+functions has been added: USART_OverSampling8Cmd() and
+USART_OneBitMethodCmd().
+
+ - DAC
+driver: add new functions handling the DAC under run feature:
+DAC_ITConfig(), DAC_GetFlagStatus(), DAC_ClearFlag(), DAC_GetITStatus()
+and DAC_ClearITPendingBit().
+ - DBGMCU driver: add new parameters for TIM15, TIM16 and TIM17: DBGMCU_TIM15_STOP, DBGMCU_TIM16_STOP, DBGMCU_TIM17_STOP.
+
+ - FLASH
+driver: the FLASH_EraseOptionBytes() function updated. This is now just
+erasing the option bytes without modifying the RDP status either
+enabled or disabled.
+ - PWR
+driver: the PWR_EnterSTOPMode() function updated. When woken up from
+STOP mode, this function resets again the SLEEPDEEP bit in the
+Cortex-M3 System Control register to allow Sleep mode entering.
+
+
+
+License
+The
+enclosed firmware and all the related documentation are not covered by
+a License Agreement, if you need such License you can contact your
+local STMicroelectronics office.
+THE
+PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO
+SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR
+ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY
+CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY
+CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH
+THEIR PRODUCTS.
+
+
+
+For
+complete documentation on STM32(CORTEX M3) 32-Bit Microcontrollers
+visit www.st.com/STM32
+ |
+
+