X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=example%2Flcd%2Fmain.c;fp=example%2Flcd%2Fmain.c;h=0000000000000000000000000000000000000000;hb=3ec53a0d34016839cf6583117dd549da88aa63c7;hp=36d6e52d9920b07cdee3b7e5e3a7df793b5c3841;hpb=29cf5d590c76ef157d9697a5871b12b8af770f00;p=fw%2Fstlink

diff --git a/example/lcd/main.c b/example/lcd/main.c
deleted file mode 100644
index 36d6e52..0000000
--- a/example/lcd/main.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/* this example is only for stm32l discover.
-   adapted from ST firmwares projects.
- */
-
-/* base headers */
-#include "stdint.h"
-
-/* libstm32l_discovery headers */
-#include "stm32l1xx_gpio.h"
-#include "stm32l1xx_adc.h"
-#include "stm32l1xx_lcd.h"
-#include "stm32l1xx_rcc.h"
-#include "stm32l1xx_rtc.h"
-#include "stm32l1xx_exti.h"
-#include "stm32l1xx_pwr.h"
-#include "stm32l1xx_syscfg.h"
-#include "stm32l1xx_dbgmcu.h"
-
-/* lcd wrapper routines header */
-#include "stm32l_discovery_lcd.h"
-
-/* boot mode */
-
-#define CONFIG_BOOT_SRAM 1
-#define CONFIG_BOOT_FLASH 0
-
-
-/* gpios
-   refer to CD00277537.pdf, APB memory space.
-   refer to CD00240193.pdf, GPIO.
-*/
-
-#define GPIOA_MODER (GPIOA_BASE + 0x00)
-#define GPIOA_ODR (GPIOA_BASE + 0x14)
-
-#define GPIOB_MODER (GPIOB_BASE + 0x00)
-#define GPIOB_ODR (GPIOB_BASE + 0x14)
-
-#define GPIOC_MODER (GPIOC_BASE + 0x00)
-#define GPIOC_ODR (GPIOC_BASE + 0x14)
-
-
-/* leds */
-
-#define LED_BLUE (1 << 6) /* port B, pin 6 */
-#define LED_GREEN (1 << 7) /* port B, pin 7 */
-
-static inline void setup_leds(void)
-{
-  /* configure port 6 and 7 as output */
-  *(volatile uint32_t*)GPIOB_MODER |= (1 << (7 * 2)) | (1 << (6 * 2));
-}
-
-static inline void switch_leds_on(void)
-{
-  *(volatile uint32_t*)GPIOB_ODR = LED_BLUE | LED_GREEN;
-}
-
-static inline void switch_leds_off(void)
-{
-  *(volatile uint32_t*)GPIOB_ODR = 0;
-}
-
-
-#define delay()						\
-do {							\
-  register unsigned int i;				\
-  for (i = 0; i < 1000000; ++i)				\
-    __asm__ __volatile__ ("nop\n\t":::"memory");	\
-} while (0)
-
-
-#if CONFIG_BOOT_SRAM
-
-extern uint32_t _fstack;
-
-static inline void setup_stack(void)
-{
-  /* setup the stack to point to _fstack (refer to ld script) */
-
-  static const uint32_t fstack = (uint32_t)&_fstack;
-
-  __asm__ __volatile__
-    (
-     "ldr sp, %0\n\t"
-     : 
-     : "m"(fstack)
-     : "sp"
-    );
-}
-
-#endif /* CONFIG_BOOT_SRAM */
-
-
-/* application related setup */
-
-static void RCC_Configuration(void)
-{  
-  /* Enable HSI Clock */
-  RCC_HSICmd(ENABLE);
-  
-  /*!< Wait till HSI is ready */
-  while (RCC_GetFlagStatus(RCC_FLAG_HSIRDY) == RESET);
-
-  /* Set HSI as sys clock*/
-  RCC_SYSCLKConfig(RCC_SYSCLKSource_HSI);
-  
-  /* Set MSI clock range to ~4.194MHz*/
-  RCC_MSIRangeConfig(RCC_MSIRange_6);
-  
-  /* Enable the GPIOs clocks */
-  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB | RCC_AHBPeriph_GPIOC| RCC_AHBPeriph_GPIOD| RCC_AHBPeriph_GPIOE| RCC_AHBPeriph_GPIOH, ENABLE);     
-
-  /* Enable comparator, LCD and PWR mngt clocks */
-  RCC_APB1PeriphClockCmd(RCC_APB1Periph_COMP | RCC_APB1Periph_LCD | RCC_APB1Periph_PWR,ENABLE);
-    
-  /* Enable ADC & SYSCFG clocks */
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_SYSCFG , ENABLE);
-
-  /* Allow access to the RTC */
-  PWR_RTCAccessCmd(ENABLE);
-
-  /* Reset RTC Backup Domain */
-  RCC_RTCResetCmd(ENABLE);
-  RCC_RTCResetCmd(DISABLE);
-
-  /* LSE Enable */
-  RCC_LSEConfig(RCC_LSE_ON);
-
-  /* Wait until LSE is ready */
-  while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET);
-  
-   /* RTC Clock Source Selection */ 
-  RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); 
-  
-  /* Enable the RTC */
-  RCC_RTCCLKCmd(ENABLE);   
-  
-  /*Disable HSE*/
-  RCC_HSEConfig(RCC_HSE_OFF);
-  if(RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET )
-  {
-    /* Stay in infinite loop if HSE is not disabled*/
-    while(1); 
-  }
-}
-
-static void Init_GPIOs(void)
-{
-#if 0 /* fixme: GPIO_Init raises a bug in some gcc toolchains */
-
-  /* GPIO, EXTI and NVIC Init structure declaration */
-  GPIO_InitTypeDef GPIO_InitStructure;
-
-#if 0
-  EXTI_InitTypeDef EXTI_InitStructure;
-  NVIC_InitTypeDef NVIC_InitStructure;
-#endif
-
-#if 0
-  /* Configure User Button pin as input */
-  GPIO_InitStructure.GPIO_Pin = USERBUTTON_GPIO_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
-  GPIO_Init(USERBUTTON_GPIO_PORT, &GPIO_InitStructure);
-#endif
-
-#if 0
-  /* Select User Button pin as input source for EXTI Line */
-  SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOA,EXTI_PinSource0);
-
-  /* Configure EXT1 Line 0 in interrupt mode trigged on Rising edge */
-  EXTI_InitStructure.EXTI_Line = EXTI_Line0 ;  // PA0 for User button AND IDD_WakeUP
-  EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
-  EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;  
-  EXTI_InitStructure.EXTI_LineCmd = ENABLE;
-  EXTI_Init(&EXTI_InitStructure);
-
-  /* Enable and set EXTI0 Interrupt to the lowest priority */
-  NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn ;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F;
-  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-  NVIC_Init(&NVIC_InitStructure); 
-#endif
-
-#if 0
-  /* Configure the LED_pin as output push-pull for LD3 & LD4 usage*/
-  GPIO_InitStructure.GPIO_Pin = LD_GREEN_GPIO_PIN | LD_BLUE_GPIO_PIN;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
-  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
-  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
-  GPIO_Init(LD_GPIO_PORT, &GPIO_InitStructure);
-  
-  /* Force a low level on LEDs*/ 
-  GPIO_LOW(LD_GPIO_PORT,LD_GREEN_GPIO_PIN);	
-  GPIO_LOW(LD_GPIO_PORT,LD_BLUE_GPIO_PIN);
-    
-  /* Counter enable: GPIO set in output for enable the counter */
-  GPIO_InitStructure.GPIO_Pin = CTN_CNTEN_GPIO_PIN;
-  GPIO_Init( CTN_GPIO_PORT, &GPIO_InitStructure);
-  
-  /* To prepare to start counter */
-  GPIO_HIGH(CTN_GPIO_PORT,CTN_CNTEN_GPIO_PIN);
-      
-  /* Configure Port A LCD Output pins as alternate function */
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_8 | GPIO_Pin_9 |GPIO_Pin_10 |GPIO_Pin_15;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-  GPIO_Init( GPIOA, &GPIO_InitStructure);
-  
-  /* Select LCD alternate function for Port A LCD Output pins */
-  GPIO_PinAFConfig(GPIOA, GPIO_PinSource1,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOA, GPIO_PinSource2,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOA, GPIO_PinSource3,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOA, GPIO_PinSource8,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOA, GPIO_PinSource9,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOA, GPIO_PinSource10,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOA, GPIO_PinSource15,GPIO_AF_LCD) ;  
-  
-  /* Configure Port B LCD Output pins as alternate function */ 
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_8 | GPIO_Pin_9 \
-                                 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15;  
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-  GPIO_Init( GPIOB, &GPIO_InitStructure);
-  
-  /* Select LCD alternate function for Port B LCD Output pins */
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource3,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource4,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource5,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource8,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource9,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource10,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource11,GPIO_AF_LCD) ;  
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource12,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource13,GPIO_AF_LCD) ;   
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource14,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOB, GPIO_PinSource15,GPIO_AF_LCD) ;   
-#endif
-
-#if 0  
-  /* Configure Port C LCD Output pins as alternate function */ 
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_6 \
-                                 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 |GPIO_Pin_11 ;                               
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
-  GPIO_Init( GPIOC, &GPIO_InitStructure);  
-
-  /* Select LCD alternate function for Port B LCD Output pins */
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource0,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource1,GPIO_AF_LCD) ; 
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource2,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource3,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource6,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource7,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource8,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource9,GPIO_AF_LCD) ;
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource10,GPIO_AF_LCD) ; 
-  GPIO_PinAFConfig(GPIOC, GPIO_PinSource11,GPIO_AF_LCD) ;  
-#endif
-  
-#if 0
-  /* Configure ADC (IDD_MEASURE) pin as Analogue */
-  GPIO_InitStructure.GPIO_Pin = IDD_MEASURE  ;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
-  GPIO_Init( IDD_MEASURE_PORT, &GPIO_InitStructure);
-#endif
-
-#else /* fixme */
-
-  /* set every port in digital output mode  */
-
-  /* PA[1:3,8:10,15] */
-  *(volatile uint32_t*)GPIOA_MODER |=
-    (GPIO_Mode_AF << (1 * 2)) |
-    (GPIO_Mode_AF << (2 * 2)) |
-    (GPIO_Mode_AF << (3 * 2)) |
-    (GPIO_Mode_AF << (8 * 2)) |
-    (GPIO_Mode_AF << (9 * 2)) |
-    (GPIO_Mode_AF << (10 * 2)) |
-    (GPIO_Mode_AF << (15 * 2));
-
-  /* PB[3:5,8:15] */
-  *(volatile uint32_t*)GPIOB_MODER |=
-    (GPIO_Mode_AF << (3 * 2)) |
-    (GPIO_Mode_AF << (4 * 2)) |
-    (GPIO_Mode_AF << (5 * 2)) |
-    (GPIO_Mode_AF << (8 * 2)) |
-    (GPIO_Mode_AF << (9 * 2)) |
-    (GPIO_Mode_AF << (10 * 2)) |
-    (GPIO_Mode_AF << (11 * 2)) |
-    (GPIO_Mode_AF << (12 * 2)) |
-    (GPIO_Mode_AF << (13 * 2)) |
-    (GPIO_Mode_AF << (14 * 2)) |
-    (GPIO_Mode_AF << (15 * 2));
-
-  /* PC[0:3,6:11] */
-  *(volatile uint32_t*)GPIOC_MODER |=
-    (GPIO_Mode_AF << (0 * 2)) |
-    (GPIO_Mode_AF << (1 * 2)) |
-    (GPIO_Mode_AF << (2 * 2)) |
-    (GPIO_Mode_AF << (3 * 2)) |
-    (GPIO_Mode_AF << (6 * 2)) |
-    (GPIO_Mode_AF << (7 * 2)) |
-    (GPIO_Mode_AF << (8 * 2)) |
-    (GPIO_Mode_AF << (9 * 2)) |
-    (GPIO_Mode_AF << (10 * 2)) |
-    (GPIO_Mode_AF << (11 * 2));
-
-#endif /* fixme */
-}
-
-
-/* main */
-
-static void __attribute__((naked)) __attribute__((used)) main(void)
-{
-#if CONFIG_BOOT_SRAM
-  /* do not use previsouly setup stack, if any */
-  setup_stack();
-#endif /* CONFIG_BOOT_SRAM */
-
-  RCC_Configuration();
-
-  Init_GPIOs();
-
-  LCD_GLASS_Init();
-
-  setup_leds();
-
-  while (1)
-  {
-    /* switch_leds_on(); */
-    GPIO_HIGH(LD_GPIO_PORT, LD_GREEN_GPIO_PIN);	
-    GPIO_HIGH(LD_GPIO_PORT, LD_BLUE_GPIO_PIN);
-
-    LCD_GLASS_Clear();
-    LCD_GLASS_DisplayString("ON   ");
-
-    delay();
-
-    /* switch_leds_off(); */
-    GPIO_LOW(LD_GPIO_PORT, LD_GREEN_GPIO_PIN);	
-    GPIO_LOW(LD_GPIO_PORT, LD_BLUE_GPIO_PIN);	
-
-    LCD_GLASS_Clear();
-    LCD_GLASS_DisplayString("  OFF");
-
-    delay();
-  }
-}