X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Fusage.inc;h=d010f398e76d926559dc5eb398217f074b0b88f3;hb=8b783887d7f136d3a389316545b74f4755e43eb4;hp=25fdd6d32899af59e183f941e7a892e2bfdc3eb9;hpb=eeceee3520fae66b35a9a9b39c866c1c2e3b0c9a;p=fw%2Faltos

diff --git a/doc/usage.inc b/doc/usage.inc
index 25fdd6d3..d010f398 100644
--- a/doc/usage.inc
+++ b/doc/usage.inc
@@ -167,13 +167,15 @@
 		 signals, but no record of the flight will be
 		 stored in on-board flash.
 
+		ifdef::easymega,telemega[]
 		|Additional Igniters
 		|four very short beeps
 		|Continuity indication for the four additional pyro
-		|channels on TeleMega and EasyMega. One high tone for
-		|no continuity, one low tone for continuity. These are
-		|produced after the continuity indicators for the two
-		|primary igniter channels.
+		 channels on TeleMega and EasyMega. One high tone for
+		 no continuity, one low tone for continuity. These are
+		 produced after the continuity indicators for the two
+		 primary igniter channels.
+		endif::easymega,telemega[]
 
 		|====
 
@@ -236,14 +238,16 @@
 		ifdef::radio[disabled, and the radio goes into transmit-only mode.]
 		ifndef::radio[disabled.]
 		The only way to get out of this
-		mode is to power the flight computer down.
+		mode is to power the flight computer down. See below for how to get the flight
+		computer to come up in Flight/Pad mode at power on.
 
 		Idle::
 		The flight computer is ready to communicate over USB
 		ifdef::radio[and in packet mode over the radio.]
 		You can configure
 		the flight computer, download data or display
-		the current state.
+		the current state. See below for how to get the flight
+		computer to come up in Idle mode at power on.
 
 		ifdef::telemetrum,easymega,telemega[]
 		For flight computers with accelerometers (TeleMetrum,