X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Fupdating-firmware.inc;h=b9216a2235288d58a8c50705d18b40a6b9b2101c;hb=6550585af6d80306d037661be66004ccf8d09013;hp=0c75fdeed6c4edbb6e9256d1b596689d151425b3;hpb=37f4a66e47370e0e5ef42b0d70cda060fa2baa64;p=fw%2Faltos

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index 0c75fdee..b9216a22 100644
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -2,7 +2,7 @@
 == Updating Device Firmware
 
 	ifdef::telemega[]
-	TeleMega, TeleMetrum v2, EasyMega, EasyMini and TeleDongle v3
+	TeleMega, TeleMetrum v2 and newer, EasyMega, EasyMini and TeleDongle v3
 	are all
 	endif::telemega[]
 	ifndef::telemega[]
@@ -28,7 +28,7 @@
 
 	ifdef::telemega[]
 
-	=== Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
+	=== Updating TeleMega, TeleMetrum v2 or newer, EasyMega, EasyMini, TeleDongle v3 or TeleBT v3 Firmware
 
 	endif::telemega[]
 	ifndef::telemega[]
@@ -84,7 +84,7 @@
 
 			Connect pin 6 and pin 1 of the companion
 			connector. Pin 1 can be identified by the square pad
-			around it, and then the pins could sequentially across
+			around it, and then the pins count sequentially across
 			the board. Be very careful to *not* short pin 8 to
 			anything as that is connected directly to the
 			battery. Pin 7 carries 3.3V and the board will crash
@@ -97,7 +97,7 @@
 
 			Connect pin 6 and pin 1 of the companion
 			connector. Pin 1 can be identified by the square pad
-			around it, and then the pins could sequentially across
+			around it, and then the pins count sequentially across
 			the board. Be very careful to *not* short pin 8 to
 			anything as that is connected directly to the
 			battery. Pin 7 carries 3.3V and the board will crash
@@ -105,12 +105,22 @@
 			the board.
 			endif::easymega[]
 
+			ifdef::easytimer[]
+			EasyTimer::
+
+			Connect pin 5 and pin 1 of the debug connector, which
+			is the six holes next to the beeper. Pin 1 can be
+			identified by the square pad around it, and then the
+			pins count sequentially across the board, making Pin 5
+			the one on the other end of the row.
+			endif::easytimer[]
+
 			ifdef::telemetrum[]
-			TeleMetrum v2::
+			TeleMetrum v2 and newer::
 
 			Connect pin 6 and pin 1 of the companion
 			connector. Pin 1 can be identified by the square pad
-			around it, and then the pins could sequentially across
+			around it, and then the pins count sequentially across
 			the board. Be very careful to *not* short pin 8 to
 			anything as that is connected directly to the
 			battery. Pin 7 carries 3.3V and the board will crash
@@ -124,7 +134,7 @@
 			Connect pin 6 and pin 1 of the debug connector, which
 			is the six holes next to the beeper. Pin 1 can be
 			identified by the square pad around it, and then the
-			pins could sequentially across the board, making Pin 6
+			pins count sequentially across the board, making Pin 6
 			the one on the other end of the row.
 			endif::easymini[]