X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Fupdating-firmware.inc;h=b1047ffa645db07bb20ce7536905f82d6207b6b4;hb=d8e9d1529cb744742cfd7d4f5e9f168d4d6dc498;hp=98e04cea6a8220b450f01e8a9235edad654134f8;hpb=31f9ed231e63b214b405a141cabce3eb758e82e6;p=fw%2Faltos

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index 98e04cea..b1047ffa 100644
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -2,7 +2,7 @@
 == Updating Device Firmware
 
 	ifdef::telemega[]
-	TeleMega, TeleMetrum v2, EasyMega, EasyMini and TeleDongle v3
+	TeleMega, TeleMetrum v2 and newer, EasyMega, EasyMini and TeleDongle v3
 	are all
 	endif::telemega[]
 	ifndef::telemega[]
@@ -28,7 +28,7 @@
 
 	ifdef::telemega[]
 
-	=== Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
+	=== Updating TeleMega, TeleMetrum v2 or newer, EasyMega, EasyMini, TeleDongle v3 or TeleBT v3 Firmware
 
 	endif::telemega[]
 	ifndef::telemega[]
@@ -106,7 +106,7 @@
 			endif::easymega[]
 
 			ifdef::telemetrum[]
-			TeleMetrum v2::
+			TeleMetrum v2 and newer::
 
 			Connect pin 6 and pin 1 of the companion
 			connector. Pin 1 can be identified by the square pad
@@ -128,6 +128,18 @@
 			the one on the other end of the row.
 			endif::easymini[]
 
+			TeleGPS v1::
+
+			Connect pin 32 on the CPU to ground.  Pin 32 is the
+			right-most pin on the bottom edge of the CPU when the
+			board is oriented with the USB and battery connectors
+			to the right.
+
+			TeleGPS v2::
+
+			Connect together pins 1 and 5 of the Debug connector.
+			Pin 1 is the pin with the square pad around the hole.
+
 			ifdef::telemetrum[]
 			TeleDongle v3::
 
@@ -141,7 +153,7 @@
 			Connect pin 4 on the CPU to 3.3V, which can be done by
 			connecting pin 1 to pin 4.  Pin 1 is the left pin on
 			the lower edge of the chip when the unit is oriented
-			such taht the SMA is at the top.
+			such that the SMA is at the top.
 
 			TeleBT v4::