X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Fupdating-firmware.inc;h=1999a9c77e6a2557458fc97aa07a5888d18d664b;hb=8066ce73d96f85efe7f5e51b1576b5fd0ff9565e;hp=0c75fdeed6c4edbb6e9256d1b596689d151425b3;hpb=37f4a66e47370e0e5ef42b0d70cda060fa2baa64;p=fw%2Faltos

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index 0c75fdee..1999a9c7 100644
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -2,7 +2,7 @@
 == Updating Device Firmware
 
 	ifdef::telemega[]
-	TeleMega, TeleMetrum v2, EasyMega, EasyMini and TeleDongle v3
+	TeleMega, TeleMetrum v2 and newer, EasyMega, EasyMini and TeleDongle v3
 	are all
 	endif::telemega[]
 	ifndef::telemega[]
@@ -28,7 +28,7 @@
 
 	ifdef::telemega[]
 
-	=== Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
+	=== Updating TeleMega, TeleMetrum v2 or newer, EasyMega, EasyMini, TeleDongle v3 or TeleBT v3 Firmware
 
 	endif::telemega[]
 	ifndef::telemega[]
@@ -105,8 +105,18 @@
 			the board.
 			endif::easymega[]
 
+			ifdef::easytimer[]
+			EasyTimer::
+
+			Connect pin 5 and pin 1 of the debug connector, which
+			is the six holes next to the beeper. Pin 1 can be
+			identified by the square pad around it, and then the
+			pins could sequentially across the board, making Pin 5
+			the one on the other end of the row.
+			endif::easytimer[]
+
 			ifdef::telemetrum[]
-			TeleMetrum v2::
+			TeleMetrum v2 and newer::
 
 			Connect pin 6 and pin 1 of the companion
 			connector. Pin 1 can be identified by the square pad