X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Fupdating-firmware.inc;h=1999a9c77e6a2557458fc97aa07a5888d18d664b;hb=765d4c96510c823b4e9410c55ba8466438846029;hp=91aa58f2b3309c87cc00edc79da6362f61c211e3;hpb=eb1c2bf5244840049c0a58e0ceecfcd9f5c290dd;p=fw%2Faltos

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index 91aa58f2..1999a9c7 100644
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -2,7 +2,7 @@
 == Updating Device Firmware
 
 	ifdef::telemega[]
-	TeleMega, TeleMetrum v2, EasyMega, EasyMini and TeleDongle v3
+	TeleMega, TeleMetrum v2 and newer, EasyMega, EasyMini and TeleDongle v3
 	are all
 	endif::telemega[]
 	ifndef::telemega[]
@@ -27,10 +27,14 @@
 	http://www.altusmetrum.org/AltOS/
 
 	ifdef::telemega[]
-	=== Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
+
+	=== Updating TeleMega, TeleMetrum v2 or newer, EasyMega, EasyMini, TeleDongle v3 or TeleBT v3 Firmware
+
 	endif::telemega[]
 	ifndef::telemega[]
+
 	=== Updating EasyMini Firmware
+
 	endif::telemega[]
 
 		Self-programmable devices are reprogrammed by
@@ -101,8 +105,18 @@
 			the board.
 			endif::easymega[]
 
+			ifdef::easytimer[]
+			EasyTimer::
+
+			Connect pin 5 and pin 1 of the debug connector, which
+			is the six holes next to the beeper. Pin 1 can be
+			identified by the square pad around it, and then the
+			pins could sequentially across the board, making Pin 5
+			the one on the other end of the row.
+			endif::easytimer[]
+
 			ifdef::telemetrum[]
-			TeleMetrum v2::
+			TeleMetrum v2 and newer::
 
 			Connect pin 6 and pin 1 of the companion
 			connector. Pin 1 can be identified by the square pad
@@ -124,6 +138,18 @@
 			the one on the other end of the row.
 			endif::easymini[]
 
+			TeleGPS v1::
+
+			Connect pin 32 on the CPU to ground.  Pin 32 is the
+			right-most pin on the bottom edge of the CPU when the
+			board is oriented with the USB and battery connectors
+			to the right.
+
+			TeleGPS v2::
+
+			Connect together pins 1 and 5 of the Debug connector.
+			Pin 1 is the pin with the square pad around the hole.
+
 			ifdef::telemetrum[]
 			TeleDongle v3::
 
@@ -131,6 +157,19 @@
 			to the USB wires on the row of pins towards the center
 			of the board. Ground is available on the capacitor
 			next to it, on the end towards the USB wires.
+			
+			TeleBT v3::
+
+			Connect pin 4 on the CPU to 3.3V, which can be done by
+			connecting pin 1 to pin 4.  Pin 1 is the left pin on
+			the lower edge of the chip when the unit is oriented
+			such that the SMA is at the top.
+
+			TeleBT v4::
+
+			Connect pin 30 on the CPU to ground. Pin 30 is the 6th
+			pin from the right on the top when the unit is oriented
+			such that the SMA is at the top.
 			endif::telemetrum[]
 
 			Once you've located the right pins: