X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelemini.inc;h=97bca72b462e7529998299b7430dd0884dd84218;hb=3735e1eb27afb873d60164a79a9e2769dc92b3a3;hp=b7b26a8a261999726fa8c976bd9f4a1b05fc2a87;hpb=6d80b89c0bd82133dd5c93df8604f562ac49c19a;p=fw%2Faltos

diff --git a/doc/telemini.inc b/doc/telemini.inc
index b7b26a8a..97bca72b 100644
--- a/doc/telemini.inc
+++ b/doc/telemini.inc
@@ -38,16 +38,16 @@
 		|Apogee pyro channel connection to pyro circuit
 
 		|2
-		|Apogee +
-		|Apogee pyro channel common connection to battery +
+		|Apogee +++
+		|Apogee pyro channel common connection to battery +++
 
 		|3
 		|Main -
 		|Main pyro channel connection to pyro circuit
 
 		|4
-		|Main +
-		|Main pyro channel common connection to battery +
+		|Main +++
+		|Main pyro channel common connection to battery +++
 
 		|Left
 		|Switch Output
@@ -62,11 +62,11 @@
 
 		As described above, using an external pyro battery involves
 		connecting the negative battery terminal to the flight
-		computer ground, connecting the positive battery terminal to
-		one of the igniter leads and connecting the other igniter
-		lead to the per-channel pyro circuit connection. Because
-		there is no solid ground connection to use on TeleMini, this
-		is not recommended.
+		computer ground, connecting the switched positive battery 
+		terminal to one of the igniter leads and connecting the other 
+		igniter lead to the per-channel pyro circuit connection. 
+		Because there is no solid ground connection to use on 
+		TeleMini, this is not recommended.
 
 		The only available ground connection on TeleMini v3 are
 		the two mounting holes next to the telemetry
@@ -75,7 +75,9 @@
 
 		Connecting the positive battery terminal to the pyro
 		charges must be done separate from TeleMini v3, by soldering
-		them together or using some other connector.
+		them together or using some other connector.  Note that you 
+		must include a switch in the pyro battery positive lead for
+		safety!
 
 		The other lead from each pyro charge is then inserted into
 		the appropriate per-pyro channel screw terminal (terminal 3 for the
@@ -134,8 +136,8 @@
 		callsign settings are, you can temporarily force it
 		back to the original default values (frequency
 		434.550MHz, callsign N0CALL) by connecting a wire
-		between hole 3 and hole 7 on the debug connector. Hole
-		3 has the square pad around it, hole 7 is the one
+		between hole 3 and hole 6 on the debug connector. Hole
+		3 has the square pad around it, hole 6 is the one
 		nearest the MS5607 baro sensor, which is a rectangular
 		component with a metal cap that has two holes in it.