X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelemini.inc;h=7dd04bf099d887abc6349d0f217a12c0ab09321a;hb=ec00f55171a6c5c827c1296178be43d311801be8;hp=b7b26a8a261999726fa8c976bd9f4a1b05fc2a87;hpb=6d80b89c0bd82133dd5c93df8604f562ac49c19a;p=fw%2Faltos

diff --git a/doc/telemini.inc b/doc/telemini.inc
index b7b26a8a..7dd04bf0 100644
--- a/doc/telemini.inc
+++ b/doc/telemini.inc
@@ -38,16 +38,16 @@
 		|Apogee pyro channel connection to pyro circuit
 
 		|2
-		|Apogee +
-		|Apogee pyro channel common connection to battery +
+		|Apogee +++
+		|Apogee pyro channel common connection to battery +++
 
 		|3
 		|Main -
 		|Main pyro channel connection to pyro circuit
 
 		|4
-		|Main +
-		|Main pyro channel common connection to battery +
+		|Main +++
+		|Main pyro channel common connection to battery +++
 
 		|Left
 		|Switch Output
@@ -62,11 +62,11 @@
 
 		As described above, using an external pyro battery involves
 		connecting the negative battery terminal to the flight
-		computer ground, connecting the positive battery terminal to
-		one of the igniter leads and connecting the other igniter
-		lead to the per-channel pyro circuit connection. Because
-		there is no solid ground connection to use on TeleMini, this
-		is not recommended.
+		computer ground, connecting the switched positive battery 
+		terminal to one of the igniter leads and connecting the other 
+		igniter lead to the per-channel pyro circuit connection. 
+		Because there is no solid ground connection to use on 
+		TeleMini, this is not recommended.
 
 		The only available ground connection on TeleMini v3 are
 		the two mounting holes next to the telemetry
@@ -75,7 +75,9 @@
 
 		Connecting the positive battery terminal to the pyro
 		charges must be done separate from TeleMini v3, by soldering
-		them together or using some other connector.
+		them together or using some other connector.  Note that you 
+		must include a switch in the pyro battery positive lead for
+		safety!
 
 		The other lead from each pyro charge is then inserted into
 		the appropriate per-pyro channel screw terminal (terminal 3 for the