X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelemini-v2.0.inc;h=5803a2cad7942800ac606dd7c0006a9cf8fe52bc;hb=6260ee1419ba5c122939b28e3e8fc6f8ecf48928;hp=63e6db5d2bcb44e090c21ac97a2457005685a3ec;hpb=adfbccfeb551c9d0315116912e7255a173fc3103;p=fw%2Faltos

diff --git a/doc/telemini-v2.0.inc b/doc/telemini-v2.0.inc
index 63e6db5d..5803a2ca 100644
--- a/doc/telemini-v2.0.inc
+++ b/doc/telemini-v2.0.inc
@@ -1,7 +1,7 @@
 == TeleMini v2.0
 
+	.TeleMini v2.0 Board
 	image::telemini-v2-top.jpg[width="5.5in"]
-
       
 	TeleMini v2.0 is 0.8 inches by 1½ inches. It adds more
 	on-board data logging memory, a built-in USB connector and
@@ -18,6 +18,7 @@
 		connections for the apogee pyro circuit and the power
 		switch. Counting from the left, the connections are as follows:
 
+		.TeleMini v2.0 Screw Terminals
 		[options="header",grid="all",cols="2,3,10"]
 		|====
 		|Terminal #|Terminal Name|Description
@@ -54,6 +55,28 @@
 		|Switch connection to positive battery terminal
 		|====
 
+	=== Connecting A Battery To TeleMini v2.0
+
+		There are two possible battery connections on TeleMini
+		v2.0. You can use either method; both feed through
+		the power switch terminals.
+
+		One battery connection is the standard Altus Metrum
+		white JST plug. This mates with single-cell Lithium
+		Polymer batteries sold by Altus Metrum.
+
+		The other is a pair of screw terminals marked 'Battery
+		+' and 'Battery -'. Connect a battery from 4 to 12
+		volts to these terminals, being careful to match polarity.
+
+	=== Charging Lithium Batteries
+
+		Because TeleMini v2.0 allows for batteries other than
+		the standard Altus Metrum Lithium Polymer cells, it
+		cannot incorporate a battery charger
+		circuit. Therefore, when using a Litium Polymer cell,
+		you'll need an external charger. These are available
+		from Altus Metrum, or from Spark Fun.
 
       	=== Using a Separate Pyro Battery with TeleMini v2.0
 	
@@ -78,12 +101,12 @@
 
       	=== Using an Active Switch with TeleMini v2.0
 	
-	  As explained above, an external active switch requires three
-	  connections, one to the positive battery terminal, one to
-	  the flight computer positive input and one to ground. Use
-	  the negative external battery connection, top terminal 4 for
-	  ground.
-		
-	  The positive battery terminal is available on bottom
-	  terminal 4, the positive flight computer input is on the
-	  bottom terminal 3.
+		As explained above, an external active switch requires three
+		connections, one to the positive battery terminal, one to
+		the flight computer positive input and one to ground. Use
+		the negative external battery connection, top terminal 4 for
+		ground.
+
+		The positive battery terminal is available on bottom
+		terminal 4, the positive flight computer input is on the
+		bottom terminal 3.