X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelemini-v1-outline.txt;h=cbcc57f8a6f1c57007ed4f716d66ca30f35b2716;hb=9841667f100585ccf50879a6bf627198578c8313;hp=bce3f651817b49f6ae910b62823836879f895a1f;hpb=b5a42665d7811707b6bd4a67d7d8e6532daa29e4;p=fw%2Faltos

diff --git a/doc/telemini-v1-outline.txt b/doc/telemini-v1-outline.txt
index bce3f651..cbcc57f8 100644
--- a/doc/telemini-v1-outline.txt
+++ b/doc/telemini-v1-outline.txt
@@ -1,10 +1,12 @@
-= TeleMini v1 Outline and Hole Pattern
+:notitle:
 :doctype: article
 
+== TeleMini v1 Outline and Hole Pattern
+
 	This image, when printed, provides a precise template for the
 	mounting holes in TeleMini. TeleMini v1 has overall dimensions of
-	0.500 x 1.500 inches, and the mounting holes are sized for use
-	with 2-56 or M2 screws. The holes are located 0.100 inches
-	from the edge of the board in both directions.
+	0.500 x 1.500 inches, and the mounting holes are sized for use with 
+	2-56 or M2 screws. The holes are located 0.100 inches from the edge 
+	of the board in both directions, meaning they are 0.300 inches apart.
 
 	image::telemini-v1.svg[align="center"]