X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelemetrum.xsl;h=fb65ce015d072fc1b3fc31d36429ab4679a9b0b2;hb=8c600abf87c95f8f214b5e56ff6eab955795dff5;hp=7d855318e3e20006166ea45ee5c011e4308862f5;hpb=20d4d410e0fc04fe192e309811eed6c0194fa5a8;p=fw%2Faltos
diff --git a/doc/telemetrum.xsl b/doc/telemetrum.xsl
index 7d855318..fb65ce01 100644
--- a/doc/telemetrum.xsl
+++ b/doc/telemetrum.xsl
@@ -13,7 +13,7 @@
2010
- Bdale Garbee
+ Bdale Garbee and Keith Packard
TeleMetrum
Owner's Manual for the TeleMetrum System
@@ -35,10 +35,170 @@
- Introduction
+ Introduction and Overview
Placeholder.
+
+ Specifications
+
+ Placeholder.
+
+
+
+ Handling Precautions
+
+ Placeholder.
+
+
+
+ Hardware Overview
+
+ Placeholder.
+
+
+
+ Operation
+
+ Placeholder.
+
+
+
+ Using Altus Metrum Products
+
+ Being Legal
+
+ First off, in the US, you need an [amateur radio license](../Radio) or
+ other authorization to legally operate the radio transmitters that are part
+ of our products.
+
+
+ In the Rocket
+
+ In the rocket itself, you just need a [TeleMetrum](../TeleMetrum) board and
+ a LiPo rechargeable battery. An 860mAh battery weighs less than a 9V
+ alkaline battery, and will run a [TeleMetrum](../TeleMetrum) for hours.
+
+
+ By default, we ship TeleMetrum with a simple wire antenna. If your
+ electronics bay or the airframe it resides within is made of carbon fiber,
+ which is opaque to RF signals, you may choose to have an SMA connector
+ installed so that you can run a coaxial cable to an antenna mounted
+ elsewhere in the rocket.
+
+
+
+ On the Ground
+
+ To receive the data stream from the rocket, you need an antenna and short
+ feedline connected to one of our [TeleDongle](../TeleDongle) units. The
+ TeleDongle in turn plugs directly into the USB port on a notebook
+ computer. Because TeleDongle looks like a simple serial port, your computer
+ does not require special device drivers... just plug it in.
+
+
+ Right now, all of our application software is written for Linux. However,
+ because we understand that many people run Windows or MacOS, we are working
+ on a new ground station program written in Java that should work on all
+ operating systems.
+
+
+ After the flight, you can use the RF link to extract the more detailed data
+ logged in the rocket, or you can use a mini USB cable to plug into the
+ TeleMetrum board directly. Pulling out the data without having to open up
+ the rocket is pretty cool! A USB cable is also how you charge the LiPo
+ battery, so you'll want one of those anyway... the same cable used by lots
+ of digital cameras and other modern electronic stuff will work fine.
+
+
+ If your rocket lands out of sight, you may enjoy having a hand-held GPS
+ receiver, so that you can put in a waypoint for the last reported rocket
+ position before touch-down. This makes looking for your rocket a lot like
+ Geo-Cacheing... just go to the waypoint and look around starting from there.
+
+
+ You may also enjoy having a ham radio "HT" that covers the 70cm band... you
+ can use that with your antenna to direction-find the rocket on the ground
+ the same way you can use a Walston or Beeline tracker. This can be handy
+ if the rocket is hiding in sage brush or a tree, or if the last GPS position
+ doesn't get you close enough because the rocket dropped into a canyon, or
+ the wind is blowing it across a dry lake bed, or something like that... Keith
+ and Bdale both currently own and use the
+ [Yaesu VX-6R](http://yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=111&encProdID=4C6F204F6FEBB5BAFA58BCC1C131EAC0&DivisionID=65&isArchived=0)
+ at launches.
+
+
+ So, to recap, on the ground the hardware you'll need includes:
+
+
+ an antenna and feedline
+
+
+ a TeleDongle
+
+
+ a notebook computer
+
+
+ optionally, a handheld GPS receiver
+
+
+ optionally, an HT or receiver covering 435 Mhz
+
+
+
+
+ The best hand-held commercial directional antennas we've found for radio
+ direction finding rockets are from
+ [Arrow Antennas](http://www.arrowantennas.com/). The 440-3 and 440-5 are
+ both good choices for finding a TeleMetrum-equipped rocket when used with
+ a suitable 70cm HT.
+
+
+
+ Data Analysis
+
+ Our software makes it easy to log the data from each flight, both the
+ telemetry received over the RF link during the flight itself, and the more
+ complete data log recorded in the DataFlash memory on the TeleMetrum
+ board. Once this data is on your computer, our postflight tools make it
+ easy to quickly get to the numbers everyone wants, like apogee altitude,
+ max acceleration, and max velocity. You can also generate and view a
+ standard set of plots showing the altitude, acceleration, and
+ velocity of the rocket during flight. And you can even export a data file
+ useable with Google Maps and Google Earth for visualizing the flight path
+ in two or three dimensions!
+
+
+ Our ultimate goal is to emit a set of files for each flight that can be
+ published as a web page per flight, or just viewed on your local disk with
+ a web browser.
+
+
+
+ Future Plans
+
+ In the future, we intend to offer "companion boards" for the rocket that will
+ plug in to TeleMetrum to collect additional data, provide more pyro channels,
+ and so forth. A reference design for a companion board will be documented
+ soon, and will be compatible with open source Arduino programming tools.
+
+
+ We are also working on the design of a hand-held ground terminal that will
+ allow monitoring the rocket's status, collecting data during flight, and
+ logging data after flight without the need for a notebook computer on the
+ flight line. Particularly since it is so difficult to read most notebook
+ screens in direct sunlight, we think this will be a great thing to have.
+
+
+ Because all of our work is open, both the hardware designs and the software,
+ if you have some great idea for an addition to the current Altus Metrum family,
+ feel free to dive in and help! Or let us know what you'd like to see that
+ we aren't already working on, and maybe we'll get excited about it too...
+
+
+
+