X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelemega.inc;h=ef701e46ce5b02406df9c596749e808c254e654f;hb=91656c9d1d6175e06d4bed8e448ac6773e172de0;hp=55f77bc48771d6db476df1adb85c4325cdd0378e;hpb=cbec66452ecd01bbd5aebf6f98443d5e0540f5d2;p=fw%2Faltos

diff --git a/doc/telemega.inc b/doc/telemega.inc
index 55f77bc4..ef701e46 100644
--- a/doc/telemega.inc
+++ b/doc/telemega.inc
@@ -1,7 +1,7 @@
 == TeleMega
 
 	.TeleMega Board
-	image::telemega-v1.0-top.jpg[width="5.5in"]
+	image::telemega-v1.0-top.jpg[width=400]
 
 	TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
 	designed to easily fit in a 38mm coupler. Like TeleMetrum,
@@ -48,24 +48,24 @@
 		|Main pyro channel connection to pyro circuit
 
 		|Top 5
-		|Main +
-		|Main pyro channel common connection to battery +
+		|Main +++
+		|Main pyro channel common connection to battery +++
 
 		|Top 6
 		|Apogee -
 		|Apogee pyro channel connection to pyro circuit
 
 		|Top 7
-		|Apogee +
-		|Apogee pyro channel common connection to battery +
+		|Apogee +++
+		|Apogee pyro channel common connection to battery +++
 
 		|Top 8
 		|D -
 		|D pyro channel connection to pyro circuit
 
 		|Top 9
-		|D +
-		|D pyro channel common connection to battery +
+		|D +++
+		|D pyro channel common connection to battery +++
 
 		|Bottom 1
 		|GND
@@ -84,24 +84,24 @@
 		|A pyro channel connection to pyro circuit
 
 		|Bottom 5
-		|A +
-		|A pyro channel common connection to battery +
+		|A +++
+		|A pyro channel common connection to battery +++
 
 		|Bottom 6
 		|B -
 		|B pyro channel connection to pyro circuit
 
 		|Bottom 7
-		|B +
-		|B pyro channel common connection to battery +
+		|B +++
+		|B pyro channel common connection to battery +++
 
 		|Bottom 8
 		|C -
 		|C pyro channel connection to pyro circuit
 
 		|Bottom 9
-		|C +
-		|C pyro channel common connection to battery +
+		|C +++
+		|C pyro channel common connection to battery +++
 		|====
 
       	=== Using a Separate Pyro Battery with TeleMega
@@ -109,9 +109,12 @@
 		TeleMega provides explicit support for an external pyro
 		battery. All that is required is to remove the jumper
 		between the lipo terminal (Bottom 3) and the pyro terminal
-		(Bottom 2). Then hook the negative pyro battery terminal to ground
-		(Bottom 1) and the positive pyro battery to the pyro battery
-		input (Bottom 2). You can then use the existing pyro screw
+		(Bottom 2). Then hook the negative pyro battery terminal to 
+		ground (Bottom 1) and the switched positive pyro battery to 
+		the pyro battery input (Bottom 2). Note that you must include
+                a switch between the pyro battery and the board for safety,
+                as the on-board power switch circuit only supports the primary
+                battery!  You can then use the existing pyro screw
 		terminals to hook up all of the pyro charges.
 
       	=== Using Only One Battery With TeleMega