X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelemega.inc;h=092077e00da73e04923c77167f9e783d965e8283;hb=af8f0b5892e01bdcf9fa4ca86a4752a8294992a1;hp=55f77bc48771d6db476df1adb85c4325cdd0378e;hpb=cbec66452ecd01bbd5aebf6f98443d5e0540f5d2;p=fw%2Faltos

diff --git a/doc/telemega.inc b/doc/telemega.inc
index 55f77bc4..092077e0 100644
--- a/doc/telemega.inc
+++ b/doc/telemega.inc
@@ -1,7 +1,7 @@
 == TeleMega
 
 	.TeleMega Board
-	image::telemega-v1.0-top.jpg[width="5.5in"]
+	image::telemega-v1.0-top.jpg[width=400]
 
 	TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
 	designed to easily fit in a 38mm coupler. Like TeleMetrum,
@@ -109,9 +109,12 @@
 		TeleMega provides explicit support for an external pyro
 		battery. All that is required is to remove the jumper
 		between the lipo terminal (Bottom 3) and the pyro terminal
-		(Bottom 2). Then hook the negative pyro battery terminal to ground
-		(Bottom 1) and the positive pyro battery to the pyro battery
-		input (Bottom 2). You can then use the existing pyro screw
+		(Bottom 2). Then hook the negative pyro battery terminal to 
+		ground (Bottom 1) and the switched positive pyro battery to 
+		the pyro battery input (Bottom 2). Note that you must include
+                a switch between the pyro battery and the board for safety,
+                as the on-board power switch circuit only supports the primary
+                battery!  You can then use the existing pyro screw
 		terminals to hook up all of the pyro charges.
 
       	=== Using Only One Battery With TeleMega