X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelemega.inc;h=092077e00da73e04923c77167f9e783d965e8283;hb=a4039a60bbe972fd022699d62ab06a8f1bc4af69;hp=0975172f6c6f189dd5ba55f72b3079938eb382a7;hpb=6d80b89c0bd82133dd5c93df8604f562ac49c19a;p=fw%2Faltos

diff --git a/doc/telemega.inc b/doc/telemega.inc
index 0975172f..092077e0 100644
--- a/doc/telemega.inc
+++ b/doc/telemega.inc
@@ -109,9 +109,12 @@
 		TeleMega provides explicit support for an external pyro
 		battery. All that is required is to remove the jumper
 		between the lipo terminal (Bottom 3) and the pyro terminal
-		(Bottom 2). Then hook the negative pyro battery terminal to ground
-		(Bottom 1) and the positive pyro battery to the pyro battery
-		input (Bottom 2). You can then use the existing pyro screw
+		(Bottom 2). Then hook the negative pyro battery terminal to 
+		ground (Bottom 1) and the switched positive pyro battery to 
+		the pyro battery input (Bottom 2). Note that you must include
+                a switch between the pyro battery and the board for safety,
+                as the on-board power switch circuit only supports the primary
+                battery!  You can then use the existing pyro screw
 		terminals to hook up all of the pyro charges.
 
       	=== Using Only One Battery With TeleMega