X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Ftelelaunch-troubleshooting.inc;h=d44d043b4392a11aa4f6a2bf267de2f74560d7b5;hb=91656c9d1d6175e06d4bed8e448ac6773e172de0;hp=25c0b81927d2fbc9fea03c2bb42b527ae0e5635b;hpb=b6602d8c4053932a72c2bf4a63e24793634b2ad0;p=fw%2Faltos

diff --git a/doc/telelaunch-troubleshooting.inc b/doc/telelaunch-troubleshooting.inc
index 25c0b819..d44d043b 100644
--- a/doc/telelaunch-troubleshooting.inc
+++ b/doc/telelaunch-troubleshooting.inc
@@ -1,6 +1,25 @@
 [appendix]
 == Troubleshooting
 
+	=== TeleFire Fails to Arm
+
+		If turning the TeleLCO key switch from "SAFE" to "ARM" does
+		not cause the selected TeleFire box to start flashing and
+		sounding its siren, the most likely cause is that the 
+		TeleFire box was left with the local safe/arm switch in the
+		safe position.  The Remote Arm LED on TeleLCO shows the state
+		of the safe/arm switch on the currently selected TeleFire box
+		and can be used to confirm this situation.
+
+		Note that in a cross-bank drag race configuration, any TeleFire
+		boxes involved in the drag race that are fully armed will
+		launch, while any TeleFire boxes involved in the drag race
+		that are not fully armed will not launch.  Pay attention to
+		make sure all involved TeleFire boxes are flashing their
+		strobe lights and sounding their sirens before launch to
+		ensure all desired rockets will actually participate in such
+		a drag race.
+
 	=== Radio Signal Strength
 
 		Each unit in the TeleLaunch system has a debugging feature