X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Fopenocd.texi;h=03bb508479d7370ff21bfa02952373afa36ff71b;hb=f97915f248d7e3e7db49139b4fbb40e1e480ed53;hp=b328370e4d01fbb4db14c362c72c968d26997c28;hpb=8c1d518232c3105e5599099f41038212250f3798;p=fw%2Fopenocd

diff --git a/doc/openocd.texi b/doc/openocd.texi
index b328370e4..03bb50847 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -594,8 +594,8 @@ produced, PDF schematics are easily found and it is easy to make.
 @item @b{vdebug}
 @* A driver for Cadence virtual Debug Interface to emulated or simulated targets.
 It implements a client connecting to the vdebug server, which in turn communicates
-with the emulated or simulated RTL model through a transactor. The current version
-supports only JTAG as a transport, but other virtual transports, like DAP are planned.
+with the emulated or simulated RTL model through a transactor. The driver supports
+JTAG and DAP-level transports.
 
 @item @b{jtag_dpi}
 @* A JTAG driver acting as a client for the SystemVerilog Direct Programming
@@ -613,6 +613,9 @@ emulation model of target hardware.
 @* A bitbang JTAG driver using Linux legacy sysfs GPIO.
 This is deprecated from Linux v5.3; prefer using @b{linuxgpiod}.
 
+@item @b{esp_usb_jtag}
+@* A JTAG driver to communicate with builtin debug modules of Espressif ESP32-C3 and ESP32-S3 chips using OpenOCD.
+
 @end itemize
 
 @node About Jim-Tcl
@@ -3643,6 +3646,44 @@ buspirate led 1
 
 @end deffn
 
+@deffn {Interface Driver} {esp_usb_jtag}
+Espressif JTAG driver to communicate with ESP32-C3, ESP32-S3 chips and ESP USB Bridge board using OpenOCD.
+These chips have built-in JTAG circuitry and can be debugged without any additional hardware.
+Only an USB cable connected to the D+/D- pins is necessary.
+
+@deffn {Config Command} {espusbjtag tdo}
+Returns the current state of the TDO line
+@end deffn
+
+@deffn {Config Command} {espusbjtag setio} setio
+Manually set the status of the output lines with the order of (tdi tms tck trst srst)
+@example
+espusbjtag setio 0 1 0 1 0
+@end example
+@end deffn
+
+@deffn {Config Command} {espusbjtag vid_pid} vid_pid
+Set vendor ID and product ID for the ESP usb jtag driver
+@example
+espusbjtag vid_pid 0x303a 0x1001
+@end example
+@end deffn
+
+@deffn {Config Command} {espusbjtag caps_descriptor} caps_descriptor
+Set the jtag descriptor to read capabilities of ESP usb jtag driver
+@example
+espusbjtag caps_descriptor 0x2000
+@end example
+@end deffn
+
+@deffn {Config Command} {espusbjtag chip_id} chip_id
+Set chip id to transfer to the ESP USB bridge board
+@example
+espusbjtag chip_id 1
+@end example
+@end deffn
+
+@end deffn
 
 @section Transport Configuration
 @cindex Transport
@@ -4913,7 +4954,9 @@ compact Thumb2 instruction set. Supports also ARMv6-M and ARMv8-M cores
 @item @code{dsp5680xx} -- implements Freescale's 5680x DSP.
 @item @code{esirisc} -- this is an EnSilica eSi-RISC core.
 The current implementation supports eSi-32xx cores.
+@item @code{esp32} -- this is an Espressif SoC with dual Xtensa cores.
 @item @code{esp32s2} -- this is an Espressif SoC with single Xtensa core.
+@item @code{esp32s3} -- this is an Espressif SoC with dual Xtensa cores.
 @item @code{fa526} -- resembles arm920 (w/o Thumb).
 @item @code{feroceon} -- resembles arm926.
 @item @code{hla_target} -- a Cortex-M alternative to work with HL adapters like ST-Link.