X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Feasymini-device.inc;h=841f7a3ee6a7966a58ddba1ee8bb63104478f68b;hb=3735e1eb27afb873d60164a79a9e2769dc92b3a3;hp=fb2b6098879f9b95f66f14ca94dbcae4e32bd827;hpb=992c0eab6275cec7d5035b99952537fd7ece2ed4;p=fw%2Faltos

diff --git a/doc/easymini-device.inc b/doc/easymini-device.inc
index fb2b6098..841f7a3e 100644
--- a/doc/easymini-device.inc
+++ b/doc/easymini-device.inc
@@ -1,7 +1,7 @@
 == EasyMini
 
 	.EasyMini Board
-	image::easymini-top.jpg[width="5.5in"]
+	image::easymini-top.jpg[width=400]
 
 	EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
 	designed to fit in a 24mm coupler tube.
@@ -31,11 +31,11 @@
 		|Main pyro channel connection to pyro circuit
 	      
 		|Top 2
-		|Main +
-		|Main pyro channel common connection to battery +
+		|Main +++
+		|Main pyro channel common connection to battery +++
 	      
 		|Top 3
-		|Battery +
+		|Battery +++
 		|Positive external battery terminal
 	      
 		|Top 4
@@ -47,8 +47,8 @@
 		|Apogee pyro channel connection to pyro circuit
 	      
 		|Bottom 2
-		|Apogee +
-		|Apogee pyro channel common connection to battery +
+		|Apogee +++
+		|Apogee pyro channel common connection to battery +++
 	      
 		|Bottom 3
 		|Switch Output
@@ -94,9 +94,11 @@
 		ground, connect it to the negative external battery
 		connection, top terminal 4.
 
-		Connecting the positive battery terminal to the pyro
+		Connecting the switched positive battery terminal to the pyro
 		charges must be done separate from EasyMini, by soldering
-		them together or using some other connector.
+		them together or using some other connector.  Note that for
+		safety, you must put a switch between the pyro battery and
+		the rest of the circuit!
 
 		The other lead from each pyro charge is then inserted into
 		the appropriate per-pyro channel screw terminal (top