X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Feasymega.inc;h=506f4c5f2fea3dc0c9d9fa2d3c1b23c02ab18cc8;hb=a4039a60bbe972fd022699d62ab06a8f1bc4af69;hp=c126004bdf511ff3f96c35cce9ea24a320391542;hpb=553d9041b52cbb88662fcc5e6a277ce43bd151cd;p=fw%2Faltos diff --git a/doc/easymega.inc b/doc/easymega.inc index c126004b..506f4c5f 100644 --- a/doc/easymega.inc +++ b/doc/easymega.inc @@ -1,7 +1,7 @@ == EasyMega .EasyMega Board - image::easymega-v1.0-top.jpg[width="4.5in"] + image::easymega-v1.0-top.jpg[width=430] EasyMega is a 1¼ inch by 2¼ inch circuit board. It was designed to easily fit in a 38mm coupler. Like TeleMetrum, @@ -97,9 +97,12 @@ EasyMega provides explicit support for an external pyro battery. All that is required is to remove the jumper between the lipo terminal (Bottom 3) and the pyro terminal - (Bottom 2). Then hook the negative pyro battery terminal to ground - (Bottom 1) and the positive pyro battery to the pyro battery - input (Bottom 2). You can then use the existing pyro screw + (Bottom 2). Then hook the negative pyro battery terminal to + ground (Bottom 1) and the switched positive pyro battery to + the pyro battery input (Bottom 2). Note that you must include + a switch between the pyro battery and the board for safety, + as the on-board power switch circuit only supports the primary + battery! You can then use the existing pyro screw terminals to hook up all of the pyro charges. === Using Only One Battery With EasyMega