X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Feasymega.inc;h=506f4c5f2fea3dc0c9d9fa2d3c1b23c02ab18cc8;hb=769f0e6049ae0440cf32f8cb0b5e504f67f5e911;hp=a948aaae36cf8dee123ead07e44321319d78ef62;hpb=6d80b89c0bd82133dd5c93df8604f562ac49c19a;p=fw%2Faltos

diff --git a/doc/easymega.inc b/doc/easymega.inc
index a948aaae..506f4c5f 100644
--- a/doc/easymega.inc
+++ b/doc/easymega.inc
@@ -97,9 +97,12 @@
 		EasyMega provides explicit support for an external pyro
 		battery. All that is required is to remove the jumper
 		between the lipo terminal (Bottom 3) and the pyro terminal
-		(Bottom 2). Then hook the negative pyro battery terminal to ground
-		(Bottom 1) and the positive pyro battery to the pyro battery
-		input (Bottom 2). You can then use the existing pyro screw
+		(Bottom 2). Then hook the negative pyro battery terminal to 
+		ground (Bottom 1) and the switched positive pyro battery to 
+		the pyro battery input (Bottom 2). Note that you must include
+		a switch between the pyro battery and the board for safety,
+		as the on-board power switch circuit only supports the primary
+		battery!  You can then use the existing pyro screw
 		terminals to hook up all of the pyro charges.
 
       	=== Using Only One Battery With EasyMega