X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Faltusmetrum.xsl;h=c5c08d4e0e1a78073361210bc49ddb135823c2c6;hb=b3d8956df3a3ecb3918b5db4d78b057d68541c33;hp=9fdd6b07ef098fde375df9f9f415821500a412aa;hpb=c6d7776bbe0b7f84e51af88d1ac2b7d35133a0ad;p=fw%2Faltos
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 9fdd6b07..c5c08d4e 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -386,6 +386,36 @@ NAR #88757, TRA #12200
tower with a screw-driver trying to turn on your avionics before
installing igniters!
+
+ TeleMini is configured via the radio link. Of course, that
+ means you need to know the TeleMini radio configuration values
+ or you won't be able to communicate with it. For situations
+ when you don't have the radio configuration values, TeleMini
+ offers an 'emergency recovery' mode. In this mode, TeleMini is
+ configured as follows:
+
+
+ Sets the radio frequency to 434.550MHz
+
+
+ Sets the radio calibration back to the factory value.
+
+
+ Sets the callsign to N0CALL
+
+
+ Does not go to 'pad' mode after five seconds.
+
+
+
+
+ To get into 'emergency recovery' mode, first find the row of
+ four small holes opposite the switch wiring. Using a short
+ piece of small gauge wire, connect the outer two holes
+ together, then power TeleMini up. Once the red LED is lit,
+ disconnect the wire and the board should signal that it's in
+ 'idle' mode after the initial five second startup period.
+
GPS
@@ -2649,6 +2679,7 @@ NAR #88757, TRA #12200
Release Notes
+ Version 1.2
Version 1.1.1
Version 1.1
Version 1.0.1