X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Faltusmetrum.xsl;h=885c573e15b3b684ad5540753405bd467f192d34;hb=3b5c4d88671e6c511fbfb1ce6b046f558dd6c2bf;hp=fb08f5c642fa32f284ba2958a14d76a77b762794;hpb=d24ef4aa9429f4884548e5c9fd48d57e640f0d9d;p=fw%2Faltos diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl index fb08f5c6..885c573e 100644 --- a/doc/altusmetrum.xsl +++ b/doc/altusmetrum.xsl @@ -1539,10 +1539,13 @@ NAR #88757, TRA #12200 first five seconds of operation. - At power on, you will hear three beeps or see three flashes - (“S” in Morse code for start up) and then a pause while - the altimeter completes initialization and self test, and decides - which mode to enter next. + At power on, the altimeter will beep out the battery voltage + to the nearest tenth of a volt. Each digit is represented by + a sequence of short “dit” beeps, with a pause between + digits. A zero digit is represented with one long “dah” + beep. Then there will be a short pause while the altimeter + completes initialization and self test, and decides which mode + to enter next. Here's a short summary of all of the modes and the beeping (or @@ -1570,7 +1573,7 @@ NAR #88757, TRA #12200 Startup S - dit dit dit + battery voltage in decivolts Calibrating sensors, detecting orientation. @@ -5127,7 +5130,8 @@ NAR #88757, TRA #12200 - + @@ -5141,7 +5145,8 @@ NAR #88757, TRA #12200 - + @@ -5155,7 +5160,8 @@ NAR #88757, TRA #12200 - + @@ -5169,7 +5175,8 @@ NAR #88757, TRA #12200 - +