X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Faltusmetrum.xsl;h=87220baa50cb1b9a92e91d293e74492f2011ac33;hb=d3d69bdecfcb45d1e3a8c6b10c80eef1afcc2310;hp=5c18fec35bb26f1e3e0eaa29386d27ab97cd6c24;hpb=eff8611e3eb19853b06acfcd7e978c9046cd5f78;p=fw%2Faltos
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 5c18fec3..87220baa 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -22,7 +22,7 @@
Towns
- 2011
+ 2012
Bdale Garbee and Keith Packard
@@ -35,6 +35,14 @@
+
+ 1.1
+ 13 September 2012
+
+ Updated for software version 1.1. Version 1.1 has new
+ features but is otherwise compatible with version 1.0.
+
+
1.0
24 August 2011
@@ -258,7 +266,8 @@ NAR #88757, TRA #12200
A typical TeleMetrum or TeleMini installation involves attaching
only a suitable Lithium Polymer battery, a single pole switch for
power on/off, and two pairs of wires connecting e-matches for the
- apogee and main ejection charges.
+ apogee and main ejection charges. All Altus Metrum products are
+ designed for use with single-cell batteries with 3.7 volts nominal.
By default, we use the unregulated output of the Li-Po battery directly
@@ -1290,6 +1299,16 @@ NAR #88757, TRA #12200
your local radio regulations.
+
+ Imperial Units
+
+ This switches between metric units (meters) and imperial
+ units (feet and miles). This affects the display of values
+ use during flight monitoring, data graphing and all of the
+ voice announcements. It does not change the units used when
+ exporting to CSV files, those are always produced in metric units.
+
+
Font Size
@@ -1319,6 +1338,73 @@ NAR #88757, TRA #12200
+
+ Configure Groundstation
+
+ Select this button and then select a TeleDongle Device from the list provided.
+
+
+ The first few lines of the dialog provide information about the
+ connected device, including the product name,
+ software version and hardware serial number. Below that are the
+ individual configuration entries.
+
+
+ Note that the TeleDongle itself doesn't save any configuration
+ data, the settings here are recorded on the local machine in
+ the Java preferences database. Moving the TeleDongle to
+ another machine, or using a different user account on the same
+ machine will cause settings made here to have no effect.
+
+
+ At the bottom of the dialog, there are three buttons:
+
+
+
+
+ Save. This writes any changes to the
+ local Java preferences file. If you don't
+ press this button, any changes you make will be lost.
+
+
+
+
+ Reset. This resets the dialog to the most recently saved values,
+ erasing any changes you have made.
+
+
+
+
+ Close. This closes the dialog. Any unsaved changes will be
+ lost.
+
+
+
+
+ The rest of the dialog contains the parameters to be configured.
+
+
+ Frequency
+
+ This configures the frequency to use for both telemetry and
+ packet command mode. Set this before starting any operation
+ involving packet command mode so that it will use the right
+ frequency. Telemetry monitoring mode also provides a menu to
+ change the frequency, and that menu also sets the same Java
+ preference value used here.
+
+
+
+ Radio Calibration
+
+ The radios in every Altus Metrum device are calibrated at the
+ factory to ensure that they transmit and receive on the
+ specified frequency. To change a TeleDongle's calibration,
+ you must reprogram the unit completely, so this entry simply
+ shows the current value and doesn't allow any changes.
+
+
+
Flash Image
@@ -1447,8 +1533,9 @@ NAR #88757, TRA #12200
In the rocket itself, you just need a TeleMetrum or
TeleMini board and
- a Li-Po rechargeable battery. An 860mAh battery weighs less than a 9V
- alkaline battery, and will run a TeleMetrum for hours.
+ a single-cell, 3.7 volt nominal Li-Po rechargeable battery. An
+ 850mAh battery weighs less than a 9V alkaline battery, and will
+ run a TeleMetrum for hours.
A 110mAh battery weighs less than a triple A battery and will run a TeleMetrum for
a few hours, or a TeleMini for much (much) longer.
@@ -2480,6 +2567,7 @@ NAR #88757, TRA #12200
Release Notes
+