X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Faltusmetrum.xsl;h=476b48aa7234874e0aee7a49f3607ffe2d359abf;hb=27e6dbbe95ae9b361d60576e0cbadb66792307f3;hp=937be07992ab6dd5fd54057d20e3fb4f1252605f;hpb=92d7841edcfc8a841f71f7f97cc541f8e55c4627;p=fw%2Faltos
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 937be079..476b48aa 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -1289,9 +1289,20 @@ NAR #88757, TRA #12200
on Packet Command Mode for more information about this.
- The filename for the data is computed automatically from the recorded
- flight date, TeleMetrum serial number and flight number
- information.
+ After the device has been selected, a dialog showing the
+ flight data saved in the device will be shown allowing you to
+ select which flights to download and which to delete. With
+ version 0.9 or newer firmware, you must erase flights in order
+ for the space they consume to be reused by another
+ flight. This prevents you from accidentally losing flight data
+ if you neglect to download data before flying again. Note that
+ if there is no more space available in the device, then no
+ data will be recorded for a flight.
+
+
+ The filename for each flight log is computed automatically
+ from the recorded flight date, TeleMetrum serial number and
+ flight number information.
@@ -1476,6 +1487,35 @@ NAR #88757, TRA #12200
as needed to conform to your local radio regulations.
+
+ Maximum Flight Log Size
+
+ This sets the space (in kilobytes) allocated for each flight
+ log. The available space will be divided into chunks of this
+ size. A smaller value will allow more flights to be stored,
+ a larger value will record data from longer flights.
+
+
+ During ascent, TeleMetrum records barometer and
+ accelerometer values 100 times per second, other analog
+ information (voltages and temperature) 6 times per second
+ and GPS data once per second. During descent, the non-GPS
+ data is recorded 1/10th as often. Each barometer +
+ accelerometer record takes 8 bytes.
+
+
+ The default, 192kB, will store over 200 seconds of data at
+ the ascent rate, or over 2000 seconds of data at the descent
+ rate. That's plenty for most flights. This leaves enough
+ storage for five flights in a 1MB system, or 10 flights in a
+ 2MB system.
+
+
+ The configuration block takes the last available block of
+ memory, on v1.0 boards that's just 256 bytes. However, the
+ flash part on the v1.1 boards uses 64kB for each block.
+
+
Configure AltosUI
@@ -1527,6 +1567,16 @@ NAR #88757, TRA #12200
your local radio regulations.
+
+ Serial Debug
+
+ This causes all communication with a connected device to be
+ dumped to the console from which AltosUI was started. If
+ you've started it from an icon or menu entry, the output
+ will simply be discarded. This mode can be useful to debug
+ various serial communication issues.
+
+