X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=debian%2Fchangelog;h=c559ba589b7381454d573499a391dfb1904305bd;hb=a35243ed78012f877a36bf747047750dffd6c710;hp=84801358400aa3247852eea1c144a30e9997e251;hpb=eb7cb138248568a402cb9490f7ccfa2023866852;p=fw%2Faltos diff --git a/debian/changelog b/debian/changelog index 84801358..c559ba58 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,314 @@ +altos (1.9.6-1) unstable; urgency=medium + + [ Bdale Garbee ] + * Releasing: updated with changes from 1.9.5 release + * first cut at EasyMotor v2 .. not compiling yet + * easymotor: override .gitignore to store Makefiles + * recover easymotor-v2/flash-loader/ao_pins.h from backups + * update configure.ac for 1.9.6 release + * releaseing 1.9.6 + + [ Keith Packard ] + * altos: Remove linker map files during 'make clean' + * altos: Fix flash loader map file names + * altosui: Include telelco and telefireeight firmware in FAT builds + * libaltos: Avoid using strcmp and strchr on windows + * altos/drivers: Add ao_adxl375_accel_to_sample macro + * altos: Allow use of ADXL375 as IMU + * altos: Add EasyMotor logging support + * altos: Support accel-only IMU configurations + * altos/stmf0: Add spi format configuration options + * altos/easymotor-v2: Add .gitignore + * altos/easymotor-v2: Get easy motor building + * altos/easymotor-v2: Use same init order as easymini + * altos/easymotor-v2: Fix beeper config + * altos/stmf0: Fixup for SPI mode support + * altos/easymotor-v2: ADXL375 is upside-down compared with other boards + * altos/easymotor-v2: Beep out 'pad mode' repeatedly + * altos: Let ao_data.c be used by ao_flight_test + * altos/test: Build ao_flight_test_motor + * altos/easymotor-v2: Add 'through' axis definition + * altos: Change adxl375 self test parameters + * altos: De-bias height/speed data while on pad + * altos: Log motor pressure and battery voltage for EasyMotor + * altos/test: Clean up easy motor test jig + * altos: Support negative decimal values on command line + * altos: Add motor pressure calibration data to easy motor log + * altos: Reset 3d-accel and motor pressure sums each ground interval + * altoslib: Initialize gyro offset values to MISSING + * altoslib: Add conversion for motor pressure sensor + * altoslib: Add 'motor_pressure' data value + * altosuilib: Graph motor pressure + * altoslib: Add EasyMotor EEPROM support + * altoslib: Report metric pressure in kPa instead of Pa + * altoslib: use motor pressure calibration data for EasyMotor + * altoslib: Correct ADXL counts_per_g + * altoslib: Easy Motor v2 x axis is inverted + * altoslib: Limit .csv file output to valid fields for EasyMotor + * altoslib: Clip accelerometer-based speed to >= 0 + * altoslib: Add defines for EasyMotor + * altoslib: Don't pass along GPS information when the GPS device is busted + * doc: 1.9.6 release notes + * libaltos: Add pre-built windows dll binaries + * doc: Mention BMX-160 self-test fix in 1.9.6 release notes + + -- Bdale Garbee Thu, 22 Oct 2020 16:20:59 -0600 + +altos (1.9.5-1) unstable; urgency=medium + + [ Keith Packard ] + * altosui: Spurious ; in altos-windows.nsi.in kept out TM v3.0 ihx + * Add support for TLS if needed + * Releasing: save .map files too + * altos: Use state transitions to directly drive igniters + * altos: Add 'booster' mode for dual-deploy igniters + * altos/stm: Increase MISO DMA priority to very high + * altos: Protect shared storage_data with mutex + * altos: Support flash parts > 8MB + * altos: Use new ao_spi_speed inline to set SPI speeds using spec'd frequencies + * altosui: Re-set pad orientation labels after product name is set + * altos/stmf0, stm32f0: Call ao_boot_chain to start application + * altos/stm: Fix stack validation code + * altos: Fix a bunch of time variables to be AO_TICK_TYPE + * altos: Add initial stm32l0 support + * altos: Switch micropeak v2.0 to stm32l0 + * altos: Declare ao_delay_until API in ao.h + * altos: Move empty ao_mutex_get/put to ao_notask.h + * altos: Add ao_delay_until to ao_notask + * remove ao_delay_until from ao.h + * altos/ao_storage: allow erased byte value to be set by application + * altos/ao_storage: Allow apps to #define storage parameters + * altos: Micropeak v2.0 doesn't have a flash loader anymore + * altos/stm32l0: More DMA fixes + * altos/stm32l0: Some device addrs were wrong + * altos/stm32l0: Get SPI driver working + * altos/stm32l0: Get exti working + * altos/stm32l0: Remove some unused code in USART driver + * altos/stm32l0: Remove some unused code in ao_timer.c + * altos/stm32l0: Add adc and flash drivers + * altos/micropeak-v2.0: Finish hardware bring-up + * altos/stm32l0: Provide ao_spi_speed inline as per new clocking API + * altos/stm32l0: Add LPUART driver + * altos: add noreturn attribute to ao_panic + * ao-tools: Add TeleGPS log parsing to ao-eeprom + * altos: Remove ao_led_toggle API from general code + * altos: Remove support for !HAS_TASK_QUEUE + * altos/stm32l0: Big update in functionality + * altos: Add MicroPeak v2.0 support to ao_log_micro + * altos/micropeak-v2.0: Functionally complete. + * altos/mpusb-v3.0: Make this build again + * micropeak: Check for empty data when fetching log + * micropeak: Fix top-level window building + * micropeak: Add support for MicroPeak v2.0 + * altos: Don't report inhibited pyro channels as fired + * altos: Allow multiple manual firing of main/drogue channels + * altoslib: Don't fetch config data for every idle status + * altoslib: Flush output when disabling remote + * altoslib: Improve configuration performance over remote link + * altosui: Improve configuration save feedback + * doc: Fix spelling error in updating-firmware section. + * altoslib: Deal with reflashing EasyMega boards with ancient firmware + * altosuilib: Allow config to be missing in rom config dialog + * libaltos: Map generic windows device names to actual names + * altoslib: Set default logging directory to $HOME/AltusMetrum + * macosx: Hack JavaApplicationStub to set freetype properties + * windows: Point windows users at adoptopenjdk.net by default + * altosuilib: Make dialogs mostly scrollable + * macosx: Update macosx install script + * libaltos: Update to support Mac OS X 10.15 (catalina) + * altoslib: Print more helpful debug messages when checking rom version + * doc: Add 1.9.5 release notes + * altosdroid: Copy generated .apks to bin directory + * altosui: Work around lack of actual USB product names on Windows + * Version 1.9.5 + + [ Bdale Garbee ] + * ao-bringup: ensure TeleMega turnon scripts are using the right test versions + * doc: EasyMotor and EasyTimer have the same mounting geometry as EasyMini + * fix broken TeleBT turnon script + * docs: fix horrible typo in TeleLaunch configuration section + * docs: add explicit admonition about avoiding 'c f' when configuring TeleLaunch + * debian: stop delivering gdm and slim theme materials, since we don't use them + * releasing 1.9.5 + + -- Bdale Garbee Wed, 30 Sep 2020 00:19:56 -0600 + +altos (1.9.4-2) unstable; urgency=medium + + * eliminate old explicit run-time dep on libjson-c4, closes: #966562 + + -- Bdale Garbee Wed, 05 Aug 2020 11:27:40 -0600 + +altos (1.9.4-1) unstable; urgency=medium + + [ Bdale Garbee ] + * ao-bringup: first cut at turn-on scripts for EasyTimer v1 + * releasing 1.9.4 + + [ Keith Packard ] + * Add telemetrum v3.0 firmware to release + * altos: Reduce flash temp buffer to make space for Em v1.0 ISR stack + * altos: Make AO_STORAGE_TEST use a separate buffer + * doc: Doc updates for 1.9.4 + * Version 1.9.4 + + -- Bdale Garbee Thu, 02 Jul 2020 20:22:56 -0600 + +altos (1.9.3-1) unstable; urgency=medium + + [ Keith Packard ] + * altos: add APRS 'offset' value to set APRS transmision time + * altoslib, altosui, telegps: Add configuration support for APRS offset + * doc: Document APRS offset configuration value + * doc: start release notes for 1.9.3 + * map-server: Create Manifest.txt at build time + * altosui: Report baro ground alt for 'Pad Altitude' when GPS missing + * Start release notes for 1.9.4 + * ao-tools: Use array indexing instead of addition to make gcc-10 happy + * ao-tools: Declare ao_verbose as extern in shared header. + * debian: Switch debian dependency to picolibc + * altos/stm: Make ao_eeprom_total a #define instead of a const variable + * Create map file for all programs + * altos/lpc: Add explicit defines for all register groups + * ignore .map files + * altos: Move from newlib-nano to picolibc + * Mark stm_interrupt_vector as const so it is READONLY + * ao-tools/ao-usbload: stubs in man page for missing options + * altos: Allow MPU9250 SPI speed to be set by application + * altos: Allow accel-only flight code + * altos: Allow igniter status beeping with only 'extra' channels + * altos: Allow BMX160 to be used as primary accel + * altos: Allow flight support without logging + * altos: Build easytimer-v1 by default + * altos: Fix ao_ignite.c to work without HAS_IGNITE + * easytimer-v1: Enable pyro commands + * altos: Initialize pyro code for easytimer-v1 + * altoslib: Remember flight list in AltosConfigData + * altosui: Adjust max log setting for storage block size + * altos: Move ao_storage_erase to shared code. Add len + * altos: Round selected log size down to ao_storage_block multiple + * altos: Handle flight_log_max not being multiple of ao_storage_block + * altos: Leave accel data in ring raw; swap for orientation on fetch + * Add EasyTimer configuration support + * altoslib: Add EasyTimer idle monitor support + * Add some release note notes + * altoslib: Fix easytimer voltage conversions + * altosui: Remove six-axis pad orientation for easy timer + * altos: Don't include baro-specific config values for easytimer + * altos: Fix HAS_FLIGHT_DEBUG for easytimer + * doc: Avoid mis-interpretation of '+' in device wiring tables + * doc: Update for EasyTimer + * Check for picolibc when testing arm compilers + * Add EasyTimer firmware to packages and Releasing + * map-server: Manifest files are generated now + * altos/test: Ignore ao_flight_test_mini binary + * altos: Remove newlib-nano defines from Makedefs.in + * altos: Fix printf format mis-matches + * altos: Leave floating printf enabled on m3 devices + * Update 1.9.3 release notes + * doc: Update doc for 1.9.3 + * Version 1.9.3 + + [ Bdale Garbee ] + * point turnon_telemetrum_v2 to correct test script for v2.0 + * altos: add easytimer-v1 source directory + * releasing 1.9.3 + + -- Bdale Garbee Mon, 15 Jun 2020 20:36:15 -0600 + +altos (1.9.2-1) unstable; urgency=medium + + [ Bdale Garbee ] + * Releasing: capture notes from 1.9.1 release + * Releasing: add TeleMetrum v3.0 firmware to production list + * doc: update copyright year in footers, note need to check this doc/RELNOTEs + * update info on using separate pyro batteries to encourage including a switch + * update TeleMega production scripts for v4.0 + * include TeleMega v4 in list of firmware included in fat build and LLC repo + * update copyright assertion in TeleLaunch manual + * update ChangeLog for release 1.9.2 + + [ Keith Packard ] + * altos: Initial bits for TeleMega v4.0 + * altos: Build TeleMega v4.0 bits + * altos: Use AO_TICK_TYPE/AO_TICK_SIGNED for lco/pad code + * altos: Make debug telemini firmware a bit easier to build + * altos: TeleMini beeper is on Tim2 CH4, not Tim3 CH4 + * altos: Disable ao_btm debug. Avoids breaking 's' command + * altos: Always start application if boot pin isn't in use + * Generate altosdroid/app/build.gradle at configure time + * Force using opensdk-8 to build altosdroid + * Bump altosdroid version to 20, always build release apk + * Use 'must' instead of 'should' in reference to switch for pyro battery + * altosdroid: Switch to NotificationCompat + * altosdroid: Request fine location permission if not already granted + * altosdroid: Check if the telem service is running when bluetooth gets enabled + * Bump version to build a new android app -- 1.9.1c + * altosdroid: Add text size selection + * Bump version to build a new android app (23) + * altosdroid: Use custom dialog themes for all dialogs + * altosdroid: Fix a pile of compile warnings + * altosdroid: Change tracker selection dialog + * altosdroid: Ignore 'build.gradle', which is built from a .in file + * altosdroid: Add helper 'makefile' + * altosui: Set idle mode frequency before starting link + * altosdroid: When the user switches frequency, look for something there + * Bump version to build a new android app (25) + * altosdroid: Use select tracker dialog when deleting a tracker + * altosdroid: Make frequency changes during idle mode work + * altosdroid: Change layout of idle mode dialog a bit + * altoslib: Reset consecutive GPS count when GPS bad + * altos: Fix wiring mistakes for TeleMega v4.0 + * altos: Add new telemetry packet format for TeleMega v4 + * altos: Create new log format for TeleMega v4 + * altoslib: Add 'gauss' units for magnetic field strength + * altosuilib: Add fourth column to info table + * altoslib: Store IMU accel ground data in converted values + * altoslib: Add support for TeleMega v4 + * altoslib: Move 'state_name' API to AltosCalData + * altoslib: Report whether GPS data contains new location/sat info + * altoslib: Re-initialize cal data for eeprom record set + * altoslib: Report raw baro height instead of kalman filtered value + * altosuilib: Put units on GPS altitude and height in info table + * altoslib: Pass all flight records while reading telem file + * doc: updates for 1.9.2 + * altosui: Add TeleMega v4.0 firmware to altosui packaged bits + * altosuilib: Eliminate a couple java compiler warnings + * Bump version for new android upload + * altos: Log BMX160 data when present + * altos: Copy BMX160 data to data ring + * altos: Get BMX160 initialized correctly + * altoslib: Remove ADXL375 debug noise + * ao-tools: Add TeleMega v4.0 to ao-eeprom + * altos: Init BMX160 more carefully + * altoslib: Correct IMU axes for telemetry data + * ao-tools: Handle TeleMega v4.0 telemetry in ao-telem + * altos: Adjust comment about how the BMX160 is oriented + * altos/altoslib: BMX160 Y axis gyro direction is opposite from MPU + * altoslib: Fix Tmega v4 eeprom parsing + * libaltos: Delay freeing serial device until not busy + * altoslib: Correct sign of telemega v4 pitch + * altoslib: Remove hard-coded accel scale for mega eeprom + * altosuilib, altoslib: Add azimuth and compass to reports + * altos/telemega-4.0: Fix signs of IMU pitch and mag across + * altos/bmx160: Compute µT in bmx160 driver using trim data + * altoslib: BMX160 driver now returns µT values for mag sensor + * Bump java lib versions in preparation for 1.9.2 + * Set doc version and date from package version and release date + * Bump version to 1.9.2, android 27 + * Bump java lib versions in preparation for 1.9.2 + * altoslib: Add TeleMega-v4 adxl375 config to AltosConfigData + * Bump version to 1.9.2, android 27 + * Set doc version and date from package version and release date + * Bump java lib versions in preparation for 1.9.2 + * Bump version to 1.9.2, android 27 + * altoslib: Remove debug printf from AltosIMU.java + * libaltos: Create altos_pause_one_second API + * Bump java lib versions in preparation for 1.9.2 + * Bump version to 1.9.2, android 27 + + -- Bdale Garbee Tue, 25 Feb 2020 23:58:43 -0700 + altos (1.9.1-1) unstable; urgency=medium [ Bdale Garbee ]