X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=debian%2Fchangelog;h=6b441b2efbb2568dac8b4ea3e3a565d32a64f414;hb=HEAD;hp=0650c9d40c013c10739c27b49d01d1771d61ecc7;hpb=01cefa181b04e53c20109ef8f3ffff633744da73;p=fw%2Faltos diff --git a/debian/changelog b/debian/changelog deleted file mode 100644 index 0650c9d4..00000000 --- a/debian/changelog +++ /dev/null @@ -1,345 +0,0 @@ -altos (0.6+185+g45a1c2d) unstable; urgency=low - - [ Bdale Garbee ] - * more text created during SFO->DEN flight - - [ Keith Packard ] - * Revert "Add optional 's' command to packet slave to enable/disable - slave mode" - * Disable interrupts while reading from stdin - - -- Bdale Garbee Wed, 05 May 2010 01:52:27 -0600 - -altos (0.6+180+g99094f0) unstable; urgency=low - - [ Keith Packard ] - * Increase reset switch time to 100ms - * Add optional 's' command to packet slave to enable/disable slave - mode - * More ALtosUI changes - * Autodetect flite voice registration function - - [ Bdale Garbee ] - * capture work done on SFO->DEN flight - * add some RF usage information from an email reply sent today, and - re-indent - - -- Bdale Garbee Tue, 27 Apr 2010 00:17:57 -0600 - -altos (0.6+171+g9394393) unstable; urgency=low - - [ Bdale Garbee ] - * wrong Yaesu model - - [ Keith Packard ] - * Only have the slave return a packet if it received one. - - -- Bdale Garbee Sat, 10 Apr 2010 15:01:04 -0600 - -altos (0.6+168+gc0ee1ae) unstable; urgency=low - - [ Bdale Garbee ] - * INSTALL file changed by auto tools - - [ Keith Packard ] - * libflite may forget to reference libasound - - -- Bdale Garbee Fri, 09 Apr 2010 00:08:24 -0600 - -altos (0.6+164+g5c3b6e2) unstable; urgency=low - - [ Keith Packard ] - * Start adding java-based UI - * Add telemetry data parsing code - * Add Windows install .inf file - * Fix windows install file - * Add telem parsing code - * Steal C code from ao-view - * Display table of flight info. gps is not working yet though - * Fix up table formatting - * Fix status update - * Fix state updates - * Clean up GPS data formatting - * Report current gps nsat, not last locked nsat - * Remove GPS data missing from skytraq. Save max height/accel/speed - * Remove unused cell renderer class - * Make .jar file - * Use RXTX for serial comm. Add logdir preference saving - * Make ao_radio_idle keep trying to get the radio to idle. - * Don't abort the radio when enabling telemetry monitoring - * Clean up some altosui comments - * Switch TeleMetrum from v0.2 to v1.0 - * Add Linux device discovery - * Interrupt running replay thread when starting another replay - * serial port read function cannot be interrupted. poll every 1 second - * TD reports "not-connected" when GPS has 0 sats - * Tasks may move in task structure as a result of ao_exit - * Enable telemetry monitoring - * Use 16-bit flite voice (which appears to have changed symbols - recently) - * When changing RESET line, delay 20ms - - [ Bdale Garbee ] - * choose a better set of docbook xsl files - - -- Bdale Garbee Thu, 08 Apr 2010 19:56:27 -0600 - -altos (0.6+131+g6629ec5) unstable; urgency=low - - * lose the url entirely for now - - -- Bdale Garbee Thu, 08 Apr 2010 12:43:01 -0600 - -altos (0.6+129+g934434f) unstable; urgency=low - - * fix typo in url - - -- Bdale Garbee Thu, 08 Apr 2010 12:41:38 -0600 - -altos (0.6+127+g05ad583) unstable; urgency=low - - * need another build dep - - -- Bdale Garbee Thu, 08 Apr 2010 12:35:04 -0600 - -altos (0.6+125+g8f1d47e) unstable; urgency=low - - * make lintian happy - * tweak copyright assertion - * crudely incorporate "day in the life" info from web page - * rewrite urls in docbook format - - -- Bdale Garbee Thu, 08 Apr 2010 12:28:04 -0600 - -altos (0.6+119+g00f49c8) unstable; urgency=low - - [ Bdale Garbee ] - * update changelogs for Debian build - * move gbp.conf into debian/ - * initial harness for documentation - * fix typo - - [ Keith Packard ] - * Round radio calibration value instead of truncating - * Document the ao-dumplog '--remote' flag for radio-link downloads - - -- Bdale Garbee Tue, 30 Mar 2010 23:19:15 -0600 - -altos (0.6+108+g6e61170) unstable; urgency=low - - [ Keith Packard ] - * Need to duplicate new altitude conversion code in aoview. - - -- Bdale Garbee Thu, 04 Mar 2010 17:33:27 -0700 - -altos (0.6+106+ga1478f6) unstable; urgency=low - - [ Keith Packard ] - * Add ao_radio_xmit to help test boards without flashing them. - * Allow product names to have suffixes (like board revisions) - * Fix and document the ao-rawload --run flag - * Add LED test - * Leave .ihx files in the build directory too - easier to debug that way - * Eliminate deadlock when writing config from radio link - * Fix up LED colors for each product. - * Add .gitignore for ao-bringup - - [ Bdale Garbee ] - * create a turn on script for lighting up TeleDongle v0.2 boards - - -- Bdale Garbee Sat, 27 Feb 2010 17:35:32 -0700 - -altos (0.6+95+g2f45953) unstable; urgency=low - - * update changelogs for Debian build - * conditionalize use of git on executability of /usr/bin/git binary - - -- Bdale Garbee Wed, 24 Feb 2010 17:30:00 -0700 - -altos (0.6+88+gdeccc10) unstable; urgency=low - - * add gawk as a build dependency since strtonum is a gawk extension - - -- Bdale Garbee Wed, 24 Feb 2010 16:44:35 -0700 - -altos (0.6+86+g2491282) unstable; urgency=low - - [ Keith Packard ] - * Disable monitor mode before attempting radio test. - * Ensure that ao_alarm waits at least the specified time - * Remove dbg driver code from telemetrum/teledongle - * Add AT45DBxx1D driver - * Remove green LED and temp sensor from v0.2 code - * Add at45db161d.h header file for new flash part. - * Add 'f' command to display flash status register contents - * Dump more flash parameters for the flash_status command - * Dump config block from read/write config and flash_status commands - * Don't set ao_flash_setup_done until we're actually done. - * Remove flash debugging printfs - * Add simple gps dump command 'g' - * Force idle mode by shorting the SPI clock to ground at boot time. - * Switch to using internal cc1111 temperature sensor - * Missing ao_mutex_put in gps_dump - * Compute daytime using GPS as time base - * Pull in a bit more data for filtering the start of the boost - * Log GPS data on pad after boost detect. - * Change barometer conversion code to shrink conversion table - * Change altos build process to support per-product compile-time - changes - * Update .gitignore files - * Quiet make output. - * Add back stack size checking to altos linking phase - * Must install .map files for ao-load to work - - -- Bdale Garbee Wed, 24 Feb 2010 14:53:01 -0700 - -altos (0.6+60+g10d1bbc) unstable; urgency=low - - [ Keith Packard ] - * Use ao_radio_get/ao_radio_put in packet code. - - -- Bdale Garbee Sat, 19 Dec 2009 13:53:32 -0700 - -altos (0.6+58+gbbb152c) unstable; urgency=low - - [ Keith Packard ] - * Re-order config values. Change frequency to cal - * Allow radio calibration to be set from ao-load - * Add --cal to man page - - -- Bdale Garbee Sat, 19 Dec 2009 12:05:26 -0700 - -altos (0.6+53+gcd49847) unstable; urgency=low - - [ Keith Packard ] - * Remove send_serial and serial_baud commands. - * Make ao_cmd_decimal produce both 32 and 16 bit values. - * Add radio calibration configuration. - - -- Bdale Garbee Sat, 05 Dec 2009 11:02:49 -0700 - -altos (0.6+49+g9a1d7dd) unstable; urgency=low - - [ Keith Packard ] - * Change default callsign to "N0CALL" - - -- Bdale Garbee Fri, 04 Dec 2009 21:01:55 -0700 - -altos (0.6+47+g4053309) unstable; urgency=low - - * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum - * change home URL in control file to be the AltOS page - - -- Bdale Garbee Thu, 26 Nov 2009 11:15:47 -0700 - -altos (0.6+43+gd6ba07e) unstable; urgency=low - - [ Keith Packard ] - * Decode HDOP data from skytraq GPS - * Document ao-postflight --gps and --kml options. - * Make ao-postflight create filenames using input filenames. - * Make TD print 0000-00-00 for invalid dates. - * Fix --plot arg handling. Add -all option. - * Convert telemetry file GPS satellite information in cc_log_read - * Don't crash if --plot isn't passed on ao-postflight command line - * ao-postflight: compute barometric alt for each GPS position - * ao-postflight: don't try to use missing gps sat data - * Automatically extract flight number for eeprom and telem filenames. - - -- Bdale Garbee Sun, 22 Nov 2009 10:18:26 -0700 - -altos (0.6+32+g87e6f3e) unstable; urgency=low - - [ Bdale Garbee ] - * fix typo in comment - - [ Keith Packard ] - * Reduce igniter firing time from 500ms to 50ms. - * Add GPS date/time output to ao-postflight. - * Eliminate SiRF state values from ao-view. - - -- Bdale Garbee Fri, 20 Nov 2009 13:18:06 -0700 - -altos (0.6+27+gb0d7e3f) unstable; urgency=low - - [ Keith Packard ] - * Add two-point accelerometer calibration. - * Remove "l" command as ao-dumplong no longer uses it - * Remove "d" command - * Remove "f" command - * Reformat ADC values to show all 16 bits - * ao_flight_test was using accel value for pressure too - * Pass accel calibration over telemetry stream. Telemetry data format - change. - * Add ability to dump eeprom data over radio link. - * In packet master, move USB flush from packet thread to echo thread - * In USB pollchar, wait for packet before re-checking USB out len - * Explicitly use USB I/O routines in packet code - * Flush pending input when switching to remote packet mode - * Stop recording in ao-dumplog after receiving an invalid block - * Move ao_match_word from ao_ignite.c to ao_cmd.c - * Add Watchdog Timer Control register definitions - * Add reboot command. - * Return radio to telemetry settings when packet system closed. - * ao-postflight: fix sloppy gps sat data realloc code (was crashing). - * Loosen tolerances for main->landed transition - * Provide a dummy 'uninstall' target in the src directory. - * Share telemetry parsing code in cc library. - * Enable telemetry receive in ao_view - * Switch order of serial/flight in ao-postflight summary - * Add flight number to telemetry stream. - * Add date to GPS data, captured from GPRMC packet. - * Stop using SiRF state info. - - -- Bdale Garbee Fri, 20 Nov 2009 11:43:56 -0700 - -altos (0.6) unstable; urgency=low - - [ Keith Packard ] - * Add support for the SkyTraq GPS unit - * Build two versions of TM, one for SiRF, one for SkyTraq - * Save some DSEG space by marking cmd functions __reentrant - * Add ao_wake_task and ao_exit - * Add keyhole-markup generation for ao-postflight. - * Initial packet bits. Just testing transmission - * Add radio carrier command - * Wait for TX to finish sending data - * Add ao_alarm - * Remove reason from ao_dma_abort - * Switch packet code from timer thread to ao_alarm - * Use ao_radio_done to wait for TX to completely finish with packet - * Send SYN packet to set sequence numbers - * Add RFIM register - * Do more flushing in packet test code - * Use ao_alarm for ao_delay so it can be easily interrupted - * Poke master to speed up packet rate when things are busy - * No need to wakeup &ao_tick_count now - * Enable packet-based communcation to command processor - * Add more docs to the README file - * Disable interrupts while removing tasks from task list - * Add ao_usb_pollchar to ao.h - - -- Bdale Garbee Mon, 02 Nov 2009 16:53:45 -0700 - -altos (0.5+90+g127c312) unstable; urgency=low - - * de-version the libreadline-dev build dependency - - -- Bdale Garbee Mon, 02 Nov 2009 15:57:29 -0700 - -altos (0.5+86+g2de548f) unstable; urgency=low - - * automate push of updated and tagged master branch during - debian/rules prebuild - * flush repetitive junk out of debian/changelog, and update the - prebuild target - * add support for tagging git repository on each Debian package build - - -- Bdale Garbee Mon, 12 Oct 2009 16:54:28 -0600 - -altos (0.5+77+gc57bd7f) unstable; urgency=low - - * build for Debian from git - - -- Bdale Garbee Mon, 12 Oct 2009 15:57:19 -0600 -