X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=core%2Fresources%2Fl10n%2Fmessages.properties;h=f982f0d14a29cad3fab2320edb56b6a343421de5;hb=4d97d149b0ef11eac895be021600613d3f152ad9;hp=b15792f89e0d8157c24ab4ff18f15100ecea0825;hpb=aaf017aef09554938e90ee25068793e53ff41506;p=debian%2Fopenrocket
diff --git a/core/resources/l10n/messages.properties b/core/resources/l10n/messages.properties
index b15792f8..f982f0d1 100644
--- a/core/resources/l10n/messages.properties
+++ b/core/resources/l10n/messages.properties
@@ -1,4 +1,3 @@
-
#
# English base translation file
#
@@ -26,7 +25,7 @@ RocketActions.DelCompAct.Delete = Delete
RocketActions.DelCompAct.ttip.Delete = Delete the selected component.
RocketActions.DelSimuAct.Delete = Delete
RocketActions.DelSimuAct.ttip.Delete = Delete the selected simulation.
-RocketActions.DelAct.Delete = Delete
+RocketActions.DelAct.Delete = Delete
RocketActions.DelAct.ttip.Delete = Delete the selected component or simulation.
RocketActions.CutAction.Cut = Cut
RocketActions.CutAction.ttip.Cut = Cut this component or simulation to the clipboard and remove from this design
@@ -48,7 +47,7 @@ RocketActions.MoveDownAct.ttip.Movedown = Move this component downwards.
RocketPanel.FigTypeAct.Sideview = Side view
RocketPanel.FigTypeAct.ttip.Sideview = Side view
RocketPanel.FigTypeAct.Backview = Back view
-RocketPanel.FigTypeAct.ttip.Backview = Rear view
+RocketPanel.FigTypeAct.ttip.Backview = Rear view
RocketPanel.FigViewAct.2D = 2D View
RocketPanel.FigViewAct.ttip.2D = 2D View
RocketPanel.FigViewAct.3D = 3D View
@@ -90,12 +89,12 @@ dlg.but.ok = OK
dlg.but.cancel = Cancel
dlg.but.close = Close
-
! General file type names
filetypes.pdf = PDF files (*.pdf)
BasicFrame.SimpleFileFilter1 = All rocket designs (*.ork; *.rkt)
BasicFrame.SimpleFileFilter2 = OpenRocket designs (*.ork)
BasicFrame.SimpleFileFilter3 = RockSim designs (*.rkt)
+BasicFrame.SimpleFileFilter4 = OpenRocket presets (*.orc)
filetypes.images = Image files
@@ -107,9 +106,9 @@ AboutDialog.lbl.version = Version
! - AboutDialog.lbl.translatorWebsite is a URL to the translator / group (may be empty)
! - AboutDialog.lbl.translatorIcon is the file name of an icon under pix/translators/ (may be empty)
AboutDialog.lbl.translation = English translation by:
-AboutDialog.lbl.translator =
-AboutDialog.lbl.translatorWebsite =
-AboutDialog.lbl.translatorIcon =
+AboutDialog.lbl.translator =
+AboutDialog.lbl.translatorWebsite =
+AboutDialog.lbl.translatorIcon =
! Print dialog
@@ -170,6 +169,9 @@ debuglogdlg.lbl.Logmessage = Log message:
debuglogdlg.lbl.Stacktrace = Stack trace:
+! MotorChooserDialog
+MotorChooserDialog.title = Select a rocket motor
+
! Edit Motor configuration dialog
edtmotorconfdlg.but.removemotor = Remove motor
edtmotorconfdlg.but.Selectmotor = Select motor
@@ -220,7 +222,7 @@ pref.dlg.but.reset = Reset
pref.dlg.but.checknow = Check now
pref.dlg.but.defaultmetric = Default metric
pref.dlg.but.defaultimperial = Default imperial
-pref.dlg.title.Preferences = Preferences
+pref.dlg.title.Preferences = Preferences
pref.dlg.tab.Units = Units
pref.dlg.tab.Defaultunits = Default units
pref.dlg.tab.Materials = Materials
@@ -230,6 +232,7 @@ pref.dlg.tab.Miscellaneousoptions = Miscellaneous options
pref.dlg.lbl.Positiontoinsert = Position to insert new body components:
pref.dlg.lbl.Confirmdeletion = Confirm deletion of simulations:
pref.dlg.lbl.User-definedthrust = User-defined thrust curves:
+pref.dlg.lbl.Windspeed = Wind speed
pref.dlg.Allthrustcurvefiles = All thrust curve files (*.eng; *.rse; *.zip; directories)
pref.dlg.RASPfiles = RASP motor files (*.eng)
pref.dlg.RockSimfiles = RockSim engine files (*.rse)
@@ -285,6 +288,7 @@ simedtdlg.lbl.Simname = Simulation name:
simedtdlg.tab.Launchcond = Launch conditions
simedtdlg.tab.Simopt = Simulation options
simedtdlg.tab.Plotdata = Plot data
+simedtdlg.tab.CustomExpressions = Custom expressions
simedtdlg.tab.Exportdata = Export data
simedtdlg.lbl.Motorcfg = Motor configuration:
simedtdlg.lbl.ttip.Motorcfg = Select the motor configuration to use.
@@ -339,7 +343,7 @@ simedtdlg.lbl.ttip.Timestep1 = The time between simulation steps.
A sma
simedtdlg.lbl.ttip.Timestep2 = The 4th order simulation method is quite accurate with a time step of
simedtdlg.but.ttip.resettodefault = Reset the time step to its default value (
simedtdlg.border.Simlist = Simulator listeners
-simedtdlg.txt.longA1 = Simulation listeners is an advanced feature that allows user-written code to listen to and interact with the simulation.
+simedtdlg.txt.longA1 = Simulation listeners is an advanced feature that allows user-written code to listen to and interact with the simulation.
simedtdlg.txt.longA2 = For details on writing simulation listeners, see the OpenRocket technical documentation.
simedtdlg.lbl.Curlist = Current listeners:
simedtdlg.lbl.Addsimlist = Add simulation listener
@@ -433,7 +437,7 @@ SimExpPan.Fileexists.desc1 = File \"
SimExpPan.Fileexists.desc2 = \" exists. Overwrite?
SimExpPan.Fileexists.title = File exists
SimExpPan.ExportingVar.desc1 = Exporting 1 variable out of
-SimExpPan.ExportingVar.desc2 = Exporting
+SimExpPan.ExportingVar.desc2 = Exporting
SimExpPan.ExportingVar.desc3 = variables out of
SimExpPan.Col.Variable = Variable
SimExpPan.Col.Unit = Unit
@@ -443,6 +447,82 @@ CsvOptionPanel.separator.space = SPACE
CsvOptionPanel.separator.tab = TAB
+! Custom expression general stuff
+customExpression.Name = Name
+customExpression.Symbol = Symbol
+customExpression.Expression = Expression
+customExpression.Units = Units
+customExpression.Operator = Operator
+customExpression.Description = Description
+
+! Custom expression panel
+customExpressionPanel.but.NewExpression = New expression
+customExpressionPanel.but.ttip.NewExpression = Add a new custom expression
+customExpressionPanel.but.Import = Import
+customExpressionPanel.but.ttip.Import = Import custom expressions from another .ork file
+customExpressionPanel.lbl.UpdateNote = You must run the simulation before data will be available for plotting.
+customExpressionPanel.lbl.CalcNote = Expressions will be calculated in the order shown.
+customExpressionPanel.lbl.CustomExpressions = Custom Expressions
+customExpression.Units.but.ttip.Remove = Remove this expression
+customExpression.Units.but.ttip.Edit = Edit this expression
+customExpression.Units.but.ttip.MoveUp = Move expression up in calculation order
+customExpression.Units.but.ttip.MoveDown = Move expression down in calculation order
+
+
+! Custom expression builder window
+ExpressionBuilderDialog.title = Expression Builder
+ExpressionBuilderDialog.InsertVariable = Insert Variable
+ExpressionBuilderDialog.InsertOperator = Insert Operator
+ExpressionBuilderDialog.led.ttip.Name = Name must not have already been used
+ExpressionBuilderDialog.led.ttip.Symbol = Symbol must not have already been used
+ExpressionBuilderDialog.led.ttip.Expression = Expression must use only known symbols and operators
+ExpressionBuilderDialog.CopyToOtherSimulations = Copy to other simulations
+ExpressionBuilderDialog.CopyToOtherSimulations.ttip = Make a copy of this expression in other simulations in this document.
Will not overwrite or modify any existing expressions in other simulations.
+
+! Custom expression variable selector
+CustomVariableSelector.title = Variable Selector
+
+! Custom operator selector
+CustomOperatorSelector.title = Operator Selector
+
+! Operators
+Operator.plus = Addition
+Operator.minus = Subtraction
+Operator.star = Multiplication
+Operator.div = Division
+Operator.mod = Modulo
+Operator.pow = Exponentiation
+Operator.abs = Absolute value
+Operator.ceil = Ceiling (next integer value)
+Operator.floor = Floor (previous integer value)
+Operator.sqrt = Square root
+Operator.cbrt = Cubic root
+Operator.exp = Euler\'s number raised to the value (e^x)
+Operator.ln = Natural logarithm
+Operator.sin = Sine
+Operator.cos = Cosine
+Operator.tan = Tangent
+Operator.asin = Arc sine
+Operator.acos = Arc cosine
+Operator.atan = Arc tangent
+Operator.hsin = Hyperbolic sine
+Operator.hcos = Hyperbolic cosine
+Operator.htan = Hyperbolic tangent
+Operator.log10 = Base 10 logarithm
+Operator.round = Round to nearest integer value
+Operator.random = Random number between zero and given value
+Operator.expm1 = The same as exp(x)-1, but more accurate for small x
+Operator.mean = The arithmetic mean of a given range
+Operator.min = The minimum value in a given range
+Operator.max = The maximum value in a given range
+Operator.var = The variance of a given range
+Operator.stdev = The standard deviation of a given range
+Operator.rms = The root-mean-squared value of a given range
+Operator.lclip = Clips a value (1st parameter) to be no less than a given value (2nd parameter)
+Operator.uclip = Clips a value (1st parameter) to be no greater than a given value (2nd parameter)
+Operator.binf = Gives the fraction of values in a given range (1st parameter) inside a bin with given lower (2nd parameter) and upper (3rd parameter) bounds
+Operator.trapz = Integrates the given range using trapezoidal integration
+Operator.tnear = Find the time corresponding to the point in a range (1st parameter) nearest to a given value (2nd parameter)
! MotorPlot
MotorPlot.title.Motorplot = Motor plot
@@ -456,8 +536,6 @@ MotorPlot.txt.Type = Type:
MotorPlot.txt.Delays = Delays:
MotorPlot.txt.Comment = Comment:\n
-
-
! Simulation plot panel
simplotpanel.lbl.Presetplotconf = Preset plot configurations:
simplotpanel.lbl.Xaxistype = X axis type:
@@ -471,7 +549,7 @@ simplotpanel.but.Plotflight = Plot flight
simplotpanel.lbl.Axis = Axis:
simplotpanel.but.ttip.Removethisplot = Remove this plot
simplotpanel.Desc = The data will be plotted in time order even if the X axis type is not time.
-simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed.
+simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed.
simplotpanel.OptionPane.lbl2 = Cannot add plot
simplotpanel.AUTO_NAME = Auto
simplotpanel.LEFT_NAME = Left
@@ -480,7 +558,6 @@ simplotpanel.CUSTOM = Custom
SimulationPlotPanel.error.noPlotSelected = Please add one or more variables to plot on the Y-axis.
SimulationPlotPanel.error.noPlotSelected.title = Nothing to plot
-
! Component add buttons
compaddbuttons.Bodycompandfinsets = Body components and fin sets
compaddbuttons.Nosecone = Nose cone
@@ -537,14 +614,14 @@ componentanalysisdlg.rollTableModel = Roll dynamics
componentanalysisdlg.rollTableModel.ttip = Roll dynamics
componentanalysisdlg.println.closingmethod = Closing method called:
componentanalysisdlg.println.settingnam = SETTING NAN VALUES
-componentanalysisdlg.lbl.reflenght = Reference length:
-componentanalysisdlg.lbl.refarea = Reference area:
+componentanalysisdlg.lbl.reflenght = Reference length:
+componentanalysisdlg.lbl.refarea = Reference area:
!componentanalysisdlg.But.close =Close
componentanalysisdlg.TabStability.Col.Component = Component
! Custom Material dialog
custmatdlg.title.Custommaterial = Custom material
-custmatdlg.lbl.Materialname = Material name:
+custmatdlg.lbl.Materialname = Material name:
custmatdlg.lbl.Materialtype = Material type:
custmatdlg.lbl.Materialdensity = Material density:
custmatdlg.checkbox.Addmaterial = Add material to database
@@ -657,7 +734,7 @@ RocketCompCfg.checkbox.Endcapped = End capped
RocketCompCfg.ttip.Endcapped = Whether the end of the shoulder is capped.
RocketCompCfg.title.Noseconeshoulder = Nose cone shoulder
RocketCompCfg.title.Aftshoulder = Aft shoulder
-RocketCompCfg.border.Foreshoulder = Fore shoulder
+RocketCompCfg.border.Foreshoulder = Fore shoulder
!RocketCompCfg.lbl.Length = Length:
! BulkheadConfig
@@ -752,6 +829,7 @@ LaunchLugCfg.tab.Generalprop = General properties
! MassComponentConfig
MassComponentCfg.lbl.Mass = Mass:
+MassComponentCfg.lbl.Density = Approximate density:
MassComponentCfg.lbl.Length = Length:
MassComponentCfg.lbl.Diameter = Diameter:
MassComponentCfg.lbl.PosRelativeto = Position relative to:
@@ -801,7 +879,7 @@ ParachuteCfg.lbl.Material = Material:
ParachuteCfg.combo.MaterialModel = The component material affects the weight of the component.
ParachuteCfg.lbl.longA1 = Drag coefficient CD:
ParachuteCfg.lbl.longB1 = The drag coefficient relative to the total area of the parachute.
-ParachuteCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
+ParachuteCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
ParachuteCfg.lbl.longB3 = A typical value for parachutes is 0.8.
ParachuteCfg.but.Reset = Reset
ParachuteCfg.lbl.Shroudlines = Shroud lines:
@@ -824,7 +902,7 @@ ParachuteCfg.lbl.Radialdirection = Radial direction:
ParachuteCfg.but.Reset = Reset
ParachuteCfg.lbl.plusdelay = plus
-! ShockCordConfig
+! ShockCordConfig
ShockCordCfg.lbl.Shockcordlength = Shock cord length:
ShockCordCfg.lbl.Shockcordmaterial = Shock cord material:
ShockCordCfg.lbl.Posrelativeto = Position relative to:
@@ -968,7 +1046,7 @@ PlotDialog.lbl.Chart = Click and drag down+right to zoom in, up+left to zoom out
! "main" prefix is used for the main application dialog
-# FIXME: Rename the description keys
+# FIXME: Rename the description keys
main.menu.file = File
main.menu.file.desc = File-handling related tasks
@@ -976,6 +1054,8 @@ main.menu.file.new = New
main.menu.file.new.desc = Create a new rocket design
main.menu.file.open = Open...
BasicFrame.item.Openrocketdesign = Open a rocket design
+main.menu.file.openRecent = Open Recent...
+BasicFrame.item.Openrecentrocketdesign = Open a recent rocket design
main.menu.file.openExample = Open example...
BasicFrame.item.Openexamplerocketdesign = Open an example rocket design
main.menu.file.save = Save
@@ -1010,6 +1090,8 @@ main.menu.analyze.componentAnalysis = Component analysis
main.menu.analyze.componentAnalysis.desc = Analyze the rocket components separately
main.menu.analyze.optimization = Rocket optimization
main.menu.analyze.optimization.desc = General rocket design optimization
+main.menu.analyze.customExpressions = Custom expressions
+main.menu.analyze.customExpressions.desc = Define new flight data types by writing custom mathematical expressions
main.menu.help = Help
main.menu.help.desc = Information about OpenRocket
@@ -1032,7 +1114,13 @@ main.menu.debug.createtestrocket = Create test rocket
! Translate here all material database
!
+Material.CUSTOM = Custom
+
! Material database
+Databases.materials.types.Bulk = Bulk
+Databases.materials.types.Line = Line
+Databases.materials.types.Surface = Surface
+
! BULK_MATERIAL
Databases.materials.Acrylic = Acrylic
Databases.materials.Aluminum = Aluminum
@@ -1105,16 +1193,16 @@ Shape.Ogive.desc1 = An ogive nose cone has a profile that is a segment of a circ
Shape.Ogive.desc2 = An ogive transition has a profile that is a segment of a circle. The shape parameter value 1 produces a tangent ogive, which has a smooth transition to the body tube at the aft end, values less than 1 produce secant ogives.
Shape.Ellipsoid = Ellipsoid
Shape.Ellipsoid.desc1 = An ellipsoidal nose cone has a profile of a half-ellipse with major axes of lengths 2×Length and Diameter.
-Shape.Ellipsoid.desc2 = An ellipsoidal transition has a profile of a half-ellipse with major axes of lengths 2×Length and Diameter. If the transition is not clipped, then the profile is extended at the center by the corresponding radius.
+Shape.Ellipsoid.desc2 = An ellipsoidal transition has a profile of a half-ellipse with major axes of lengths 2×Length and Diameter. If the transition is not clipped, then the profile is extended at the center by the corresponding radius.
Shape.Powerseries = Power series
-Shape.Powerseries.desc1 = A power series nose cone has a profile of Radius × (x / Length)k where k is the shape parameter. For k=0.5 this is a \u00BD-power or parabolic nose cone, for k=0.75 a \u00BE-power, and for k=1 a conical nose cone.
-Shape.Powerseries.desc2 = A power series transition has a profile of Radius × (x / Length)k where k is the shape parameter. For k=0.5 the transition is \u00BD-power or parabolic, for k=0.75 a \u00BE-power, and for k=1 conical.
+Shape.Powerseries.desc1 = A power series nose cone has a profile of Radius × (x / Length)k where k is the shape parameter. For k=0.5 this is a \u00bd-power or parabolic nose cone, for k=0.75 a \u00be-power, and for k=1 a conical nose cone.
+Shape.Powerseries.desc2 = A power series transition has a profile of Radius × (x / Length)k where k is the shape parameter. For k=0.5 the transition is \u00bd-power or parabolic, for k=0.75 a \u00be-power, and for k=1 conical.
Shape.Parabolicseries = Parabolic series
Shape.Parabolicseries.desc1 = A parabolic series nose cone has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a full parabola which is tangent to the body tube, 0.75 produces a 3/4 parabola, 0.5 procudes a 1/2 parabola and 0 produces a conical nose cone.
Shape.Parabolicseries.desc2 = A parabolic series transition has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a full parabola which is tangent to the body tube at the aft end, 0.75 produces a 3/4 parabola, 0.5 procudes a 1/2 parabola and 0 produces a conical transition.
Shape.Haackseries = Haack series
Shape.Haackseries.desc1 = The Haack series nose cones are designed to minimize drag. The shape parameter 0 produces an LD-Haack or Von Karman nose cone, which minimizes drag for fixed length and diameter, while a value of 0.333 produces an LV-Haack nose cone, which minimizes drag for fixed length and volume.
-Shape.Haackseries.desc2 = The Haack series nose cones are designed to minimize drag. These transition shapes are their equivalents, but do not necessarily produce optimal drag for transitions. The shape parameter 0 produces an LD-Haack or Von Karman shape, while a value of 0.333 produces an LV-Haack shape.
+Shape.Haackseries.desc2 = The Haack series nose cones are designed to minimize drag. These transition shapes are their equivalents, but do not necessarily produce optimal drag for transitions. The shape parameter 0 produces an LD-Haack or Von Karman shape, while a value of 0.333 produces an LV-Haack shape.
! RocketComponent
@@ -1158,6 +1246,14 @@ Parachute.Parachute = Parachute
ShockCord.ShockCord = Shock cord
! Bulkhead
Bulkhead.Bulkhead = Bulkhead
+! CenteringRing
+CenteringRing.CenteringRing = Centering ring
+! EngineBlock
+EngineBlock.EngineBlock = Engine block
+! Streamer
+Streamer.Streamer = Streamer
+! Sleeve
+Sleeve.Sleeve = Sleeve
!Rocket
Rocket.motorCount.Nomotor = [No motors]
@@ -1170,7 +1266,7 @@ MotorMount.IgnitionEvent.EJECTION_CHARGE = First ejection charge of previous sta
MotorMount.IgnitionEvent.BURNOUT = First burnout of previous stage
MotorMount.IgnitionEvent.NEVER = Never
-!ComponentIcons
+!ComponentIcons
ComponentIcons.Nosecone = Nose cone
ComponentIcons.Bodytube = Body tube
ComponentIcons.Transition = Transition
@@ -1197,6 +1293,8 @@ RecoveryDevice.DeployEvent.LAUNCH = Launch (plus NN seconds)
RecoveryDevice.DeployEvent.EJECTION = First ejection charge of this stage
RecoveryDevice.DeployEvent.APOGEE = Apogee
RecoveryDevice.DeployEvent.ALTITUDE = Specific altitude during descent
+RecoveryDevice.DeployEvent.CURRENT_STAGE_SEPARATION = Current stage separation
+RecoveryDevice.DeployEvent.LOWER_STAGE_SEPARATION = Lower stage separation
RecoveryDevice.DeployEvent.NEVER = Never
! FlightEvent
@@ -1223,7 +1321,7 @@ TCurveMotorCol.LENGTH = Length
! RocketInfo
RocketInfo.lengthLine.Length = Length
RocketInfo.lengthLine.maxdiameter = , max. diameter
-RocketInfo.massText1 = Mass with motors
+RocketInfo.massText1 = Mass with motors
RocketInfo.massText2 = Mass with no motors
RocketInfo.at = at M=
RocketInfo.cgText = CG:
@@ -1353,6 +1451,7 @@ OpenRocketPrintable.Transitiontemplates = Transition templates
OpenRocketPrintable.Noseconetemplates = Nose Cone templates
OpenRocketPrintable.Finmarkingguide = Fin marking guide
OpenRocketPrintable.DesignReport = Design Report
+OpenRocketPrintable.Centeringringtemplates = Centering Ring templates
OpenRocketDocument.Redo = Redo
OpenRocketDocument.Undo = Undo
@@ -1576,21 +1675,21 @@ GuidedTourSelectionDialog.btn.start = Start tour!
! Custom Fin BMP Importer
CustomFinImport.button.label = Import from image
CustomFinImport.badFinImage = Invalid fin image. Make sure the fin is a solid black or dark color and touching the bottom of the image.
-CustomFinImport.errorLoadingFile = Error loading file:
-CustomFinImport.errorParsingFile = Error parsing fin image:
+CustomFinImport.errorLoadingFile = Error loading file:
+CustomFinImport.errorParsingFile = Error parsing fin image:
CustomFinImport.undo = Import freeform fin set
CustomFinImport.error.title = Error loading fin profile
CustomFinImport.error.badimage = Could not deduce fin shape from image.
CustomFinImport.description = The image will be converted internally to black and white image (black for the fin), so make sure you use a solid dark color for the fin, and white or a light color for the background. The fin must be touching the bottom of the image, which is the base of the fin.
-PresetModel.lbl.select = Select preset:
+PresetModel.lbl.select = Select preset
PresetModel.lbl.database = From database...
! Component Preset Chooser Dialog
ComponentPresetChooserDialog.title = Choose component preset
-ComponentPresetChooserDialog.filter.label = Filter:
+ComponentPresetChooserDialog.filter.label = Filter by text:
ComponentPresetChooserDialog.checkbox.filterAftDiameter = Match aft diameter
ComponentPresetChooserDialog.checkbox.filterForeDiameter = Match fore diameter
ComponentPresetChooserDialog.menu.sortAsc = Sort Ascending
@@ -1603,10 +1702,12 @@ table.column.PartNo = Part Number
table.column.Description = Description
table.column.Type = Type
table.column.Length = Length
+table.column.Width = Width
table.column.InnerDiameter = Inner Diameter
table.column.OuterDiameter = Outer Diameter
-table.column.ShoulderLength = Shoulder Length
-table.column.ShoulderDiameter = Shoulder Diameter
+table.column.AftOuterDiameter = Aft Outer Diameter
+table.column.AftShoulderLength = Aft Shoulder Length
+table.column.AftShoulderDiameter = Aft Shoulder Diameter
table.column.ForeShoulderLength = Fore Shoulder Length
table.column.ForeShoulderDiameter = Fore Shoulder Diameter
table.column.ForeOuterDiameter = Fore Outer Diameter
@@ -1616,5 +1717,10 @@ table.column.Finish = Finish
table.column.Thickness = Thickness
table.column.Filled = Filled
table.column.Mass = Mass
+table.column.Diameter = Diameter
+table.column.Sides = Sides
+table.column.LineCount = Line Count
+table.column.LineLength = Line Length
+table.column.LineMaterial = Line Material