X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=ao-bringup%2Fturnon_teleterra;fp=ao-bringup%2Fturnon_teleterra;h=b63da2ffe021e6675d5ac23346cea8f99e2ef59a;hb=5d42ded7ebdb0c134c8dac61f41525c37d81ae61;hp=0000000000000000000000000000000000000000;hpb=f450f8bc70f857053b26c4379f54a318062e89a1;p=fw%2Faltos

diff --git a/ao-bringup/turnon_teleterra b/ao-bringup/turnon_teleterra
new file mode 100755
index 00000000..b63da2ff
--- /dev/null
+++ b/ao-bringup/turnon_teleterra
@@ -0,0 +1,48 @@
+#!/bin/sh
+
+if [ -x ../ao-tools/ao-load/ao-load ]; then
+	AOLOAD=../ao-tools/ao-load/ao-load
+elif [ -x /usr/bin/ao-load ]; then
+	AOLOAD=/usr/bin/ao-load
+else
+	echo "Can't find ao-load!  Aborting."
+	exit 1
+fi
+
+if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then
+	RAWLOAD=../ao-tools/ao-rawload/ao-rawload
+elif [ -x /usr/bin/ao-rawload ]; then
+	RAWLOAD=/usr/bin/ao-rawload
+else
+	echo "Can't find ao-rawload!  Aborting."
+	exit 1
+fi
+
+echo "TeleTerra v0.2 Turn-On and Calibration Program"
+echo "Copyright 2012 by Bdale Garbee.  Released under GPL v2"
+echo
+echo "Expectations:"
+echo "\tTeleTerra v0.2 powered from USB"
+echo "\t\twith TeleDongle (on /dev/ttyACM0) cabled to debug header"
+echo "\t\twith coax from SMA to frequency counter"
+echo
+echo -n "TeleTerra serial number: "
+read SERIAL
+
+echo $RAWLOAD
+
+$RAWLOAD -D 100 -r ao_led_blink.ihx
+echo "LEDs should be blinking"
+sleep 5
+
+$RAWLOAD -D 100 -r ao_radio_xmit.ihx
+echo -n "Generating RF carrier.  Please enter measured frequency: "
+read FREQ
+
+CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
+
+echo "Programming flash with cal value " $CAL_VALUE
+$AOLOAD -D 100 --cal $CAL_VALUE /home/bdale/debian/altos/src/teleterra-v0.2/*.ihx $SERIAL
+
+echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
+echo "Unplug and replug USB, cu to the board, confirm freq and record power"