X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=TeleShield%2Findex.mdwn;h=2fc3c782bd6be841ed11728cfea4f1c6c8b18415;hb=880f9cd67a0811e71bbfd174abdda6cd7263aef4;hp=eb92136db415a7acce1c8ddae91721dc6e51a5ff;hpb=13015f284f927ef8dcc70c1d9e21d0963ee9e452;p=web%2Faltusmetrum
diff --git a/TeleShield/index.mdwn b/TeleShield/index.mdwn
index eb92136..2fc3c78 100644
--- a/TeleShield/index.mdwn
+++ b/TeleShield/index.mdwn
@@ -1,3 +1,4 @@
+[[!meta title="TeleShield"]]
# TeleShield
This is an RF interface board for use with [Arduino](http://arduino.cc)
@@ -7,6 +8,11 @@ data storage.
The RF filter components are set for use in the vicinity of 435 Mhz.
+These are photos of the first prototype:
+
+ 
+ 
+
For the latest TeleShield firmware and related software, please
visit the [AltOS](../AltOS) page on this site.
@@ -19,6 +25,7 @@ visit the [AltOS](../AltOS) page on this site.
or as a USB peripheral
* 70cm ham-band transceiver compatible with [Altus Metrum](../) products,
programmed for 38k4 GFSK data rate with forward error correction
+* Bluetooth
* micro USB interface
* 4 pin Tyco MicroMaTch connector for debug and flash programming
* 8 pin Tyco MicroMaTch connector supports serial or SPI interface
@@ -36,7 +43,7 @@ visit the [AltOS](../AltOS) page on this site.
* 2 channels of serial I/O
* digital I/O
* interfaced to Arduino via async serial plus two handshake pins
-* Raycom Bluetooth module interfaced to the CC1111 via async serial
+* Rayson BTM-182 (Bluetooth SPP module) using async to CC1111
* micro SD card socket interfaced to the Arduino via SPI
* 150mA 3.3V LDO regulator
* can take input from either USB or the unregulated Arduino input
@@ -64,5 +71,10 @@ The hardware design current gEDA files are available from
## Future Plans ##
-Prototype v0.1 boards will hopefully be working in time to show at the
-Arduino mini-conference at LCA 2012 in mid-January.
+The prototype v0.1 boards work fine. Feedback from showing them at the
+Arduino mini-conference at LCA 2012 resulted in elimination of the Bluetooth
+interface. Updated boards have not been built yet, but
+[schematic and artwork files](v0.2/) are available for review and comment.
+
+No significant interest in this design ever materialized, so we have no plans
+to make any more at this time.
+
For the latest TeleShield firmware and related software, please
visit the [AltOS](../AltOS) page on this site.
@@ -19,6 +25,7 @@ visit the [AltOS](../AltOS) page on this site.
or as a USB peripheral
* 70cm ham-band transceiver compatible with [Altus Metrum](../) products,
programmed for 38k4 GFSK data rate with forward error correction
+* Bluetooth
* micro USB interface
* 4 pin Tyco MicroMaTch connector for debug and flash programming
* 8 pin Tyco MicroMaTch connector supports serial or SPI interface
@@ -36,7 +43,7 @@ visit the [AltOS](../AltOS) page on this site.
* 2 channels of serial I/O
* digital I/O
* interfaced to Arduino via async serial plus two handshake pins
-* Raycom Bluetooth module interfaced to the CC1111 via async serial
+* Rayson BTM-182 (Bluetooth SPP module) using async to CC1111
* micro SD card socket interfaced to the Arduino via SPI
* 150mA 3.3V LDO regulator
* can take input from either USB or the unregulated Arduino input
@@ -64,5 +71,10 @@ The hardware design current gEDA files are available from
## Future Plans ##
-Prototype v0.1 boards will hopefully be working in time to show at the
-Arduino mini-conference at LCA 2012 in mid-January.
+The prototype v0.1 boards work fine. Feedback from showing them at the
+Arduino mini-conference at LCA 2012 resulted in elimination of the Bluetooth
+interface. Updated boards have not been built yet, but
+[schematic and artwork files](v0.2/) are available for review and comment.
+
+No significant interest in this design ever materialized, so we have no plans
+to make any more at this time.