X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=TeleBT%2Findex.mdwn;h=8c4c0265b55d60628cab9257bf585f8e6be96f20;hb=HEAD;hp=bfde01140db1471fc6ae092e7a4e59f39f9e98ee;hpb=97a216fb19e003b319c0be060416770c106fffd9;p=web%2Faltusmetrum
diff --git a/TeleBT/index.mdwn b/TeleBT/index.mdwn
index bfde011..8c4c026 100644
--- a/TeleBT/index.mdwn
+++ b/TeleBT/index.mdwn
@@ -2,12 +2,14 @@
# TeleBT
TeleBT provides the equivalent of a [TeleDongle](../TeleDongle), with
-the addition of [Bluetooth](http://www.bluetooth.com) as an alternative to
-USB for connection to the ground station computer.
+both USB and [Bluetooth](http://www.bluetooth.com) for connection to the
+ground station computer or mobile device.
The RF filter components are set for use in the vicinity of 435 Mhz.
-These are photos of the first production version, 1.0:
+These are photos of the first production version, 1.0. Maybe someday we'll
+get around to adding photos of the current production version 4.0, but they
+look pretty similar once they're in the blue box!
@@ -19,7 +21,12 @@ And here's what it looks like packaged with battery, attached to an Arrow
For the latest TeleBT firmware and related software, please
-visit the [AltOS](../AltOS) and [AltosDroid](../AltosDroid) pages on this site.
+visit the [AltOS](../AltOS) and [AltosDroid](../AltosDroid) pages on this
+site. There is also a compatible iOS application available for sale from our
+friends at [Iron Sheep Productions](http://altosui.ironsheep.biz/).
+
+If you're using TeleBT with an [Arrow](http://www.arrowantennas.com/) yagi,
+we now have a 3D-printable [mount](mount/) design available!
## Features ##
@@ -27,33 +34,27 @@ visit the [AltOS](../AltOS) and [AltosDroid](../AltosDroid) pages on this site.
* 70cm ham-band transceiver compatible with [Altus Metrum](../) products,
programmed for 38k4 GFSK data rate with forward error correction
+* Bluetooth / Bluetooth LE radio
* micro USB interface
* 4 pin Tyco MicroMaTch connector for debug and flash programming
-* 8 pin Tyco MicroMaTch connector supports serial or SPI interface
* 850mAh LiPo battery charged via USB
### Developer View ###
-* [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip
- * Sub-1Ghz transceiver
- * 8051 MCU
- * 32k Flash
- * 4k RAM
- * USB 2.0
- * 6 12-bit analog inputs (11 bits with single-ended sensors)
- * 2 channels of serial I/O
- * digital I/O
- * interfaced to Arduino via async serial plus two handshake pins
-* Rayson BTM-182 (Bluetooth SPP module) with async interface to CC1111
-* 150mA 3.3V LDO regulator
- * input and output appear on 8-pin companion connector
+ * [STM32F042](https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-mainstream-mcus/stm32f0-series/stm32f0x2/stm32f042c6.html) System-on-Chip
+ * ARM Cortex-M0 MCU
+ * 32k Flash
+ * 6k RAM
+ * USB 2.0 Full Speed
+* [CC1200](http://www.ti.com/product/cc1200) Low Power, High Performance RF Transceiver
+* [RN4678](https://www.microchip.com/wwwproducts/en/RN4678) Bluetooth module
* Firmware Features
- * Written mostly in C with some 8051 assembler
+ * Written mostly in C with some ARM assembler
* Runs from on-chip flash, uses on-chip RAM
* USB serial emulation for data interface
* Tools Used
* [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
- * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
+ * [GCC](http://gcc.gnu.org/) compiler and source debugger
* Licenses
* The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
* The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
@@ -69,18 +70,11 @@ The hardware design current gEDA files are available from
[hw/teleshield](http://git.gag.com/?p=hw/telebt;a=summary).
For those who don't have ready access to the gEDA suite, here are pdf snapshots
-of the files for Production PCB version 1.0 in more easily readable form.
-
-* [schematic](v1.0/telebt.pdf)
-* [pcb artwork](v1.0/telebt.pcb.pdf)
-* [bill of materials](v1.0/partslist.csv)
+of the files for Production PCB version 4.0 in more easily readable form.
-## Future Plans ##
+* [schematic](v4.0/telebt-sch.pdf)
+* [pcb artwork](v4.0/telebt-big.pdf)
+* [bill of materials](v4.0/partslist.csv)
-The inventory of version 1.0 boards was lost in the fire that destroyed
-Bdale's home in June of 2013. Version 1.1 will be available for purchase
-we hope by the end of October 2013.
+## [History of TeleBT](history) ##
-TeleBT works with both AltosUI version 1.2 and later, and a new
-[Android](http://www.android.com) application
-called [AltosDroid](../AltosDroid).
@@ -19,7 +21,12 @@ And here's what it looks like packaged with battery, attached to an Arrow
For the latest TeleBT firmware and related software, please
-visit the [AltOS](../AltOS) and [AltosDroid](../AltosDroid) pages on this site.
+visit the [AltOS](../AltOS) and [AltosDroid](../AltosDroid) pages on this
+site. There is also a compatible iOS application available for sale from our
+friends at [Iron Sheep Productions](http://altosui.ironsheep.biz/).
+
+If you're using TeleBT with an [Arrow](http://www.arrowantennas.com/) yagi,
+we now have a 3D-printable [mount](mount/) design available!
## Features ##
@@ -27,33 +34,27 @@ visit the [AltOS](../AltOS) and [AltosDroid](../AltosDroid) pages on this site.
* 70cm ham-band transceiver compatible with [Altus Metrum](../) products,
programmed for 38k4 GFSK data rate with forward error correction
+* Bluetooth / Bluetooth LE radio
* micro USB interface
* 4 pin Tyco MicroMaTch connector for debug and flash programming
-* 8 pin Tyco MicroMaTch connector supports serial or SPI interface
* 850mAh LiPo battery charged via USB
### Developer View ###
-* [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip
- * Sub-1Ghz transceiver
- * 8051 MCU
- * 32k Flash
- * 4k RAM
- * USB 2.0
- * 6 12-bit analog inputs (11 bits with single-ended sensors)
- * 2 channels of serial I/O
- * digital I/O
- * interfaced to Arduino via async serial plus two handshake pins
-* Rayson BTM-182 (Bluetooth SPP module) with async interface to CC1111
-* 150mA 3.3V LDO regulator
- * input and output appear on 8-pin companion connector
+ * [STM32F042](https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-mainstream-mcus/stm32f0-series/stm32f0x2/stm32f042c6.html) System-on-Chip
+ * ARM Cortex-M0 MCU
+ * 32k Flash
+ * 6k RAM
+ * USB 2.0 Full Speed
+* [CC1200](http://www.ti.com/product/cc1200) Low Power, High Performance RF Transceiver
+* [RN4678](https://www.microchip.com/wwwproducts/en/RN4678) Bluetooth module
* Firmware Features
- * Written mostly in C with some 8051 assembler
+ * Written mostly in C with some ARM assembler
* Runs from on-chip flash, uses on-chip RAM
* USB serial emulation for data interface
* Tools Used
* [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
- * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
+ * [GCC](http://gcc.gnu.org/) compiler and source debugger
* Licenses
* The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
* The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
@@ -69,18 +70,11 @@ The hardware design current gEDA files are available from
[hw/teleshield](http://git.gag.com/?p=hw/telebt;a=summary).
For those who don't have ready access to the gEDA suite, here are pdf snapshots
-of the files for Production PCB version 1.0 in more easily readable form.
-
-* [schematic](v1.0/telebt.pdf)
-* [pcb artwork](v1.0/telebt.pcb.pdf)
-* [bill of materials](v1.0/partslist.csv)
+of the files for Production PCB version 4.0 in more easily readable form.
-## Future Plans ##
+* [schematic](v4.0/telebt-sch.pdf)
+* [pcb artwork](v4.0/telebt-big.pdf)
+* [bill of materials](v4.0/partslist.csv)
-The inventory of version 1.0 boards was lost in the fire that destroyed
-Bdale's home in June of 2013. Version 1.1 will be available for purchase
-we hope by the end of October 2013.
+## [History of TeleBT](history) ##
-TeleBT works with both AltosUI version 1.2 and later, and a new
-[Android](http://www.android.com) application
-called [AltosDroid](../AltosDroid).