X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=ReleaseNotes;h=bab0471665a63685302f60bca4a9fea345371f78;hb=0a6077b41c5db1d957dfdcc5c04954f8bb38320a;hp=ff5f136c8f5441d9aaa97aa420678afe92606881;hpb=79cdc4b6ea8848b21ba4a0e7d2fd3bc401e0bebe;p=debian%2Famanda

diff --git a/ReleaseNotes b/ReleaseNotes
index ff5f136..bab0471 100644
--- a/ReleaseNotes
+++ b/ReleaseNotes
@@ -1,7 +1,126 @@
+		Release Notes for amanda-3.2.1
+
+* barcode are added to the tapelist file.
+* Faster 'amadmin find', improve speed on many programs.
+* device-output-buffer-size default to a minimum of 4*block_size.
+* ssh auth use the client-port
+* Bug fixed
+   o "Can't opendata output stream: Connection refused" bug.
+   o Better handling of dump to tape.
+   o Corrupted 'amdump' log file, amstatus not showing correct state.
+   o Execute subprocess with the config overwrite.
+   o tape-device allow to set LEOM.
+   o Crash in robot changer.
+   o Script output property are not sent to application.
+
+
+		Release Notes for amanda-3.2.0
+
+* Support for multiple simultaneous writes to storage devices
+   o Can write to all available drives in parallel.
+   o Works only with the new changer API.
+   o Useful if two or more volumes are used in a single run.
+   o dump direct to tape can be scheduled any time during the run,
+     previously they were done sequencially after all dump to holding disk.
+   o enabled with the new 'taper-parallel-write' configuration option.
+* Support for LEOM in storage devices
+   o allows splitting without partial parts, saving space
+   o much more efficient, since parts need not be cached on disk in most
+     cases
+* new, simpler splitting commands in the tapetype section:
+  part-size, part-cache-type, part-cache-dir, part-cache-max-size; see
+  amanda.conf(5) for details
+* Amanda server configuration file changes (amanda.conf)
+   o new configuration keyword:
+      + taper-parallel-write -- How many drive amanda can write to
+                                in parallel.
+   o deprecated configuration keywords:
+      + amrecover_do_fsf
+      + amrecover_check_label
+* the CONFIG parameter to amidxtaped is now required; this means that
+  versions of amrecover older than 2.4.3 will be unable to recover from
+  servers running Amanda-3.2 and later.
+* The new dumptype and global parameters 'recovery-limit' can be used to
+  limit which hosts may recover from a particular DLE.  See amanda.conf(5)
+  and amanda-auth(7) for more information.
+* Several old changers have been removed - these changers will work with
+  Amanda for the forseeable future, but are no longer included in the
+  distribution.
+   o chg-chio
+   o chg-chs
+   o chg-iomega
+   o chg-juke
+   o chg-mcutil
+   o chg-mtx
+   o chg-null (use the new "chg-null:")
+   o chg-rait (use the new "chg-rait:{dev1,dev2}")
+   o chg-rth
+   o chg-scsi-chio
+   o chg-scsi
+* Amdump change:
+   o new '--no-taper' option to start the run in degraded mode
+* Amvault is much improved, but still experimental:
+   o supports assembling split parts on the source volume and re-splitting
+     them on the destination
+   o supports filtering dumps with the same syntax as amfetchdump
+   o a --fulls-only option skips all incremental dumps on the source
+   o an --export option tries to move tertiary volumes to import/export
+     slots when completed
+   o command-line syntax has changed incompatibly; see manpage or
+     'amvault --help'
+* Rewritten and improved:
+   o amoverview
+   o amcheckdump
+
+		Release Notes for amanda-3.1.0
+
+config
+  * The 'rawtapedev' keyword was removed, and the 'label_new_tapes' keyword
+    was deprecated.
+  * New warnings for dangerous splitting configurations
+
+changer
+  We have many changers implementing the new changer API. The new changers are
+  faster, more reliable, and have many new features.  One new features is that
+  the changer keeps track of which label is in which slot, allowing it to
+  locate a tape faster. But with some changers (new chg-multi or chg-robot
+  without a barcode), it doesn't get automaticaly notified if you change the
+  volume in a slot. In this case, you must notify the changer of it with the
+  'amtape <conf> update' command:
+    amtape DailySet1 update 3-8
+    amtape DailySet1 update 3-8=
+    amtape DailySet1 update 3=DailySet-003
+  See amanda-changers(7) for more information.
+
+ndmp, dvdrw
+  New Amanda devices - see amanda-devices(7) for more information.
+
+amsamba
+  The default amandapass file for the amsamba application is
+  $CONFIG_DIR/amandapass, but it is /etc/amandapass for program GNUTAR.
+  Don't forget to move the file if you switch to the amsamba application.
+
+ampgsql, amsuntar, amraw
+  New applications to back up PostgreSQL databases, Solaris systems, and
+  raw device files, respectively.
+
+amtape
+  Amtape's behavior has changed; see NEWS
+
+amrmtape
+  Rewritten with new command-line interface; see NEWS
+
+amdevcheck
+  New --label and --properties options give more information about device
+
+amreport
+  New, more natural command-line interface (try 'amreport $config')
+
+
 		Release Notes for amanda-2.6.1
 
 amgtar, amstar, amsamba, amzfs-sendrecv
-  Four new programs implementing application-api.
+  Three new programs implementing application-api.
   Swithching from the program "GNUTAR" to the application "amgtar" have some
   advantage:
    - amgtar use by default the gtar --atime-preserve=system option, you must