X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=README;h=cd4fc5af5cd119158cb27a2be418cceaac098c45;hb=9034a8a7b2bd845c50aee28646089c86011aa98e;hp=022e191c15e7f18318b8b5e7224c66bb6327320b;hpb=7d9f4129abd300c9bb0cb3d9b86a5856cb2b3fb7;p=fw%2Fstlink

diff --git a/README b/README
index 022e191..cd4fc5a 100644
--- a/README
+++ b/README
@@ -35,13 +35,25 @@ IF YOU HAVE AN STLINKv2
 
 You're ready to go :)
 
-To run the gdb server, do (you do not need sudo if you have set up
-permissions correctly):
-$ make && [sudo] ./gdbserver/st-util 
+COMPILING
+~~~~~~~~~
+This project was converted to Autotools by a well meaning individual. The
+following steps will build the project for you.
+
+$ ./autogen.sh
+$ ./configure
+$ make
+
+USING THE GDBSERVER
+~~~~~~~~~~~~~~~~~~~
+To run the gdb server: (you do not need sudo if you have set up
+permissions correctly)
+
+$ make && [sudo] ./st-util
 
 There are a few options:
 
-./gdbserver/st-util - usage:
+./st-util - usage:
 
   -h, --help        Print this help
   -vXX, --verbose=XX    specify a specific verbosity level (0..99)
@@ -52,8 +64,21 @@ There are a few options:
   -p 4242, --listen_port=1234
             Set the gdb server listen port. (default port: 4242)
 
-Then, in gdb: (remember, you need to run an _ARM_ gdb, not an x86 gdb)
-(gdb) target remote :4242
+Then, in your project directory, someting like this...
+(remember, you need to run an _ARM_ gdb, not an x86 gdb)
+
+$ arm-none-eabi-gdb fancyblink.elf
+...
+(gdb) tar extended-remote :4242
+...
+(gdb) load
+Loading section .text, size 0x458 lma 0x8000000
+Loading section .data, size 0x8 lma 0x8000458
+Start address 0x80001c1, load size 1120
+Transfer rate: 1 KB/sec, 560 bytes/write.
+(gdb)
+...
+(gdb) continue
 
 Have fun!
 
@@ -138,6 +163,8 @@ STLink v2 (as found on the 32L and F4 Discovery boards)
 Known Working Targets:
 * STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
 * STM32L1xx (STM32L Discovery board)
+* STM32F107RC, STM32L151RB, STM32F205RE and  STM32F405RE  on a custom boards 
+  (https://github.com/UweBonnes/wiki_fuer_alex/layout/usps...)
 * STM32F407xx (STM32F4 Discovery board)
 
 Please report any and all known working combinations so I can update this!