X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=README;h=853c5182652b8d4bc8f9eb897a017558bedd697d;hb=94c7ac86dcb2a18ab4b2b60309892f6102a53205;hp=022e191c15e7f18318b8b5e7224c66bb6327320b;hpb=a12ffa5a7dea62019b70c83c72c48ec9542b21d0;p=fw%2Fstlink

diff --git a/README b/README
index 022e191..853c518 100644
--- a/README
+++ b/README
@@ -35,25 +35,58 @@ IF YOU HAVE AN STLINKv2
 
 You're ready to go :)
 
-To run the gdb server, do (you do not need sudo if you have set up
-permissions correctly):
-$ make && [sudo] ./gdbserver/st-util 
+COMPILING
+~~~~~~~~~
+This project was converted to Autotools by a well meaning individual. The
+following steps will build the project for you.
+
+$ ./autogen.sh
+$ ./configure
+$ make
+
+USING THE GDBSERVER
+~~~~~~~~~~~~~~~~~~~
+To run the gdb server: (you do not need sudo if you have set up
+permissions correctly)
+
+$ make && [sudo] ./st-util
 
 There are a few options:
 
-./gdbserver/st-util - usage:
+./st-util - usage:
 
-  -h, --help        Print this help
-  -vXX, --verbose=XX    specify a specific verbosity level (0..99)
-  -v, --verbose specify generally verbose logging
+  -h, --help		Print this help
+  -vXX, --verbose=XX	Specify a specific verbosity level (0..99)
+  -v, --verbose		Specify generally verbose logging
   -s X, --stlink_version=X
-            Choose what version of stlink to use, (defaults to 2)
-  -1, --stlinkv1    Force stlink version 1
+			Choose what version of stlink to use, (defaults to 2)
+  -1, --stlinkv1	Force stlink version 1
   -p 4242, --listen_port=1234
-            Set the gdb server listen port. (default port: 4242)
-
-Then, in gdb: (remember, you need to run an _ARM_ gdb, not an x86 gdb)
-(gdb) target remote :4242
+			Set the gdb server listen port. (default port: 4242)
+  -m, --multi
+			Set gdb server to extended mode.
+			st-util will continue listening for connections after disconnect.
+  -n, --no-reset
+			Do not reset board on connection.
+
+The STLINKv2 device to use can be specified in the environment
+variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
+
+Then, in your project directory, someting like this...
+(remember, you need to run an _ARM_ gdb, not an x86 gdb)
+
+$ arm-none-eabi-gdb fancyblink.elf
+...
+(gdb) tar extended-remote :4242
+...
+(gdb) load
+Loading section .text, size 0x458 lma 0x8000000
+Loading section .data, size 0x8 lma 0x8000458
+Start address 0x80001c1, load size 1120
+Transfer rate: 1 KB/sec, 560 bytes/write.
+(gdb)
+...
+(gdb) continue
 
 Have fun!
 
@@ -138,7 +171,14 @@ STLink v2 (as found on the 32L and F4 Discovery boards)
 Known Working Targets:
 * STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
 * STM32L1xx (STM32L Discovery board)
+* STM32F103VC, STM32F107RC, STM32L151RB, STM32F205RE and STM32F405RE on custom boards
+  (https://github.com/UweBonnes/wiki_fuer_alex/layout/usps...)
+* STM32F303xx (STM32F3 Discovery board)
 * STM32F407xx (STM32F4 Discovery board)
+* STM32F429I-DISCO (STM32F4 Discovery board with LCD)
+* STM32F439VIT6 (discovery board reseated CPU)
+* STM32L151CB (custom board)
+* STM32L152RB (STM32L-Discovery board, custom board)
 
 Please report any and all known working combinations so I can update this!