X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=README;h=7aa3b8b69c16e4eb8c2d4eff5f4962db565c6b7c;hb=eaf4520fc0da817b3fc2f83bcd42460cb7804519;hp=cc0fb66abd90146039edd0ab5b7596030017811f;hpb=c9ebf53474b1b1f0ca28d33982b2a01122698bfd;p=fw%2Fstlink

diff --git a/README b/README
index cc0fb66..7aa3b8b 100644
--- a/README
+++ b/README
@@ -55,14 +55,22 @@ There are a few options:
 
 ./st-util - usage:
 
-  -h, --help        Print this help
-  -vXX, --verbose=XX    specify a specific verbosity level (0..99)
-  -v, --verbose specify generally verbose logging
+  -h, --help		Print this help
+  -vXX, --verbose=XX	Specify a specific verbosity level (0..99)
+  -v, --verbose		Specify generally verbose logging
   -s X, --stlink_version=X
-            Choose what version of stlink to use, (defaults to 2)
-  -1, --stlinkv1    Force stlink version 1
+			Choose what version of stlink to use, (defaults to 2)
+  -1, --stlinkv1	Force stlink version 1
   -p 4242, --listen_port=1234
-            Set the gdb server listen port. (default port: 4242)
+			Set the gdb server listen port. (default port: 4242)
+  -m, --multi
+			Set gdb server to extended mode.
+			st-util will continue listening for connections after disconnect.
+  -n, --no-reset
+			Do not reset board on connection.
+
+The STLINKv2 device to use can be specified in the environment
+variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
 
 Then, in your project directory, someting like this...
 (remember, you need to run an _ARM_ gdb, not an x86 gdb)
@@ -105,6 +113,7 @@ For convenience, you may install udev rules file, 49-stlinkv*.rules, located
 in the root of repository. You will need to copy it to /etc/udev/rules.d,
 and then either reboot or execute
 $ udevadm control --reload-rules
+$ udevadm trigger
 
 Udev will now create a /dev/stlinkv2_XX or /dev/stlinkv1_XX file, with the appropriate permissions.
 This is currently all the device is for, (only one stlink of each version is supported at 
@@ -147,6 +156,11 @@ A: Sometimes when you will try to use GDB `next' command to skip a loop,
 it will use a rather inefficient single-stepping way of doing that.
 Set up a breakpoint manually in that case and do `continue'.
 
+Q: Load command does not work in GDB.
+
+A: Some people report XML/EXPAT is not enabled by default when compiling
+GDB. Memory map parsing thus fail. Use --enable-expat.
+
 Currently known working combinations of programmer and target
 =============================================================
 
@@ -161,13 +175,30 @@ No information:
 
 STLink v2 (as found on the 32L and F4 Discovery boards)
 Known Working Targets:
+* STM32F030F4P6 (custom board)
+* STM32F0Discovery (STM32F0 Discovery board)
 * STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
 * STM32L1xx (STM32L Discovery board)
 * STM32F103VC, STM32F107RC, STM32L151RB, STM32F205RE and STM32F405RE on custom boards
   (https://github.com/UweBonnes/wiki_fuer_alex/layout/usps...)
+* STM32F103VET6 (HY-STM32 board)
+* STM32F105RCT6 (DecaWave EVB1000 board)
 * STM32F303xx (STM32F3 Discovery board)
 * STM32F407xx (STM32F4 Discovery board)
 * STM32F429I-DISCO (STM32F4 Discovery board with LCD)
+* STM32F439VIT6 (discovery board reseated CPU)
+* STM32L052K8T6 (custom board)
+* STM32L151CB (custom board)
+* STM32L152RB (STM32L-Discovery board, custom board)
 
-Please report any and all known working combinations so I can update this!
+STLink v2-1 (as found on the Nucleo boards)
+Known Working Targets:
+* STM32F401xx (STM32 Nucleo-F401RE board) 
+* STM32F030R8T6 (STM32 Nucleo-F030R8 board)
+* STM32F072RBT6 (STM32 Nucleo-F072RB board)
+* STM32F103RB (STM32 Nucleo-F103RB board)
+* STM32F303RET6 (STM32 Nucleo-F303RE board)
+* STM32F334R8 (STM32 Nucleo-F334R8 board)
+* STM32F411RET6 (STM32 Nucleo-F411RE board)
 
+Please report any and all known working combinations so I can update this!