X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=Notebook;h=74fefdbbea7f8fb084197b0e13e9ed8158dfa0fe;hb=2bfe757e931970068e04e89ee493be31eab2bc9f;hp=8b0768f64a0815a96d3d745e0fa21b0733bbc2e8;hpb=8e780739bda318011f965de576a66a96c801942f;p=hw%2Ftelefireeight

diff --git a/Notebook b/Notebook
index 8b0768f..74fefdb 100644
--- a/Notebook
+++ b/Notebook
@@ -1,6 +1,10 @@
-Amazon sells 12V 12Ah gel cells for about $30, such as ExpertPower EXP12120
+add polarity protection FET to the board so we eliminate dirpy dauther card
 
-add 8-position DIP switch to select bank 1-8.  if all switches off, firmware
-will take over and use value in flash (allows for high bank numbers)
+need to move DIP switch away from mounting hole, actual switch is larger than
+the current silksreen rectangle and makes putting that nut on nearly impossible
 
-add more mounting holes so board doesn't flex when changing spade terminals
+transfer LED color indications to the other side of the PCB
+
+possibly thermally relieve the battery negative 0.25" spade
+
+pull resistors away from through-hole LEDs to ease lead trimming