X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=NEWS;h=f7bf1d313255b6e3ff55df8a0834e127f5138a62;hb=cc440ca1d44f0aaaf34daa365966b7b092126913;hp=a8b2b44b492ead6a27849d7a4cab7aeaee44c11f;hpb=d91941d5a01ca0b9d43571edc03ba18741076cca;p=fw%2Fopenocd

diff --git a/NEWS b/NEWS
index a8b2b44b4..f7bf1d313 100644
--- a/NEWS
+++ b/NEWS
@@ -13,25 +13,29 @@ Target Layer:
 	General
 		- new "reset-assert" event, for systems without SRST
 	ARM
+		- supports "reset-assert" event (except on Cortex-M3)
 		- renamed "armv4_5" command prefix as "arm"
 		- recognize TrustZone "Secure Monitor" mode
 		- "arm regs" command output changed
 		- register names use "sp" not "r13"
 		- add top-level "mcr" and "mrc" commands, replacing
 		  various core-specific operations
-		- basic semihosting support
+		- basic semihosting support (ARM7/ARM9 only, for now)
 	ARM11
-		- Preliminary ETM and ETB hookup
-		- accelerated "flash erase_check"
-		- accelerated GDB memory checksum
-		- support "arm regs" command
-		- can access all core modes and registers
-		- watchpoint support
+		- Should act much more like other ARM cores:
+		   * Preliminary ETM and ETB hookup
+		   * accelerated "flash erase_check"
+		   * accelerated GDB memory checksum
+		   * support "arm regs" command
+		   * can access all core modes and registers
+		   * watchpoint support
+		- Shares some core debug code with Cortex-A8
 	Cortex-A8
-		- support "arm regs" command
-		- can access all core modes and registers
-		- supports "reset-assert" event (used on OMAP3530)
-		- watchpoint support
+		- Should act much more like other ARM cores:
+		   * support "arm regs" command
+		   * can access all core modes and registers
+		   * watchpoint support
+		- Shares some core debug code with ARM11
 	Cortex-M3
 		- Exposed DWT registers like cycle counter
 		- vector_catch settings not clobbered by resets
@@ -50,8 +54,11 @@ Flash Layer:
 		- <driver_name>[.N]: reference the driver's Nth bank
 	New 'nand verify' command to check bank against an image file.
 	The "flash erase_address" command now rejects partial sectors;
-		previously it would silently erase extra data.
+		previously it would silently erase extra data.  If you
+		want to erase the rest of the first and/or last sectors
+		instead of failing, you must pass an explicit "pad" flag.
 	New at91sam9 NAND controller driver.
+	New s3c64xx NAND controller driver.
 
 Board, Target, and Interface Configuration Scripts:
 	ARM9