X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=EasyMini%2Findex.mdwn;h=95316a05318c6b24d6e9af18f0b1fea6120c0e68;hb=8fc41a4bc0d3458bc5aee202ec611afe47d78450;hp=6ad1c0bcfd75961447bb6ba303ac059e03fb9233;hpb=66bce8d53427f3cef3a76d21405d0d01dcde302d;p=web%2Faltusmetrum
diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn
index 6ad1c0b..95316a0 100644
--- a/EasyMini/index.mdwn
+++ b/EasyMini/index.mdwn
@@ -1,20 +1,21 @@
+[[!meta title="EasyMini"]]
# EasyMini
This is a small, baro-only recording dual-deploy altimeter for
model rocketry
-EasyMini is available from the [Garbee and Garbee](https://shop.gag.com) web
-store, and should be available from our distributors soon.
+EasyMini version 2.0 is available from the
+[Garbee and Garbee](https://shop.gag.com) web store
+and from our distributors.
-For the latest EasyMini firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site. EasyMini requires AltOS
-version 1.3 or later.
+For the latest EasyMini firmware and related ground station software,
+please visit the [AltOS](../AltOS) page on this site. EasyMini
+version 2.0 requires AltOS version 1.8.4 or later.
-These are photos of a prototype version, we haven't take photos of the
-production units yet:
+These are photos of version 2.0:
- 
- 
+ 
+ 
## Features ##
@@ -25,13 +26,13 @@ production units yet:
* Barometric pressure sensor good to 100k feet MSL
* Designed to use a battery supplying 3.7V-12V.
* 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube
-* 2MB on-board data logging flash
+* 1MB on-board data logging flash
* Weighs only 6.5g (less than 1/4 oz)
### Developer View ###
* Hardware Features
- * [NXP LPC11U14](http://www.nxp.com/products/microcontrollers/cortex_m0_m0/LPC11U14FHI33.html) System-on-Chip
+ * [STM32F042](http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip
* ARM Cortex-M0 MCU
* 32k Flash
* 6k RAM
@@ -64,11 +65,19 @@ in the comprehensive Altus Metrum manual in
An outline of the board with drill hole locations is available in
[pdf](../Documents/easymini-outline.pdf) format.
+Thanks to Bryan Duke, there's also a 3d model of EasyMini available on
+[Thingiverse](http://www.thingiverse.com/thing:1946852).
+
The hardware design files can be found on [git.gag.com](http://git.gag.com)
in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).
For those who don't have ready access to the gEDA suite, here are pdf snapshots
of the files for production PCB version 1.0 in more easily readable form.
-* [schematic](v1.0/easymini-sch.pdf)
-* [pcb artwork](v1.0/easymini-pcb.pdf)
+* [schematic](v2.0/easymini-sch.pdf)
+* [pcb artwork](v2.0/easymini-pcb.pdf)
+
+## Older Version ##
+
+Easy Mini [version 1.0](v1.0) was largely the same design but used a
+different processor.
+ 
+ 
## Features ##
@@ -25,13 +26,13 @@ production units yet:
* Barometric pressure sensor good to 100k feet MSL
* Designed to use a battery supplying 3.7V-12V.
* 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube
-* 2MB on-board data logging flash
+* 1MB on-board data logging flash
* Weighs only 6.5g (less than 1/4 oz)
### Developer View ###
* Hardware Features
- * [NXP LPC11U14](http://www.nxp.com/products/microcontrollers/cortex_m0_m0/LPC11U14FHI33.html) System-on-Chip
+ * [STM32F042](http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip
* ARM Cortex-M0 MCU
* 32k Flash
* 6k RAM
@@ -64,11 +65,19 @@ in the comprehensive Altus Metrum manual in
An outline of the board with drill hole locations is available in
[pdf](../Documents/easymini-outline.pdf) format.
+Thanks to Bryan Duke, there's also a 3d model of EasyMini available on
+[Thingiverse](http://www.thingiverse.com/thing:1946852).
+
The hardware design files can be found on [git.gag.com](http://git.gag.com)
in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).
For those who don't have ready access to the gEDA suite, here are pdf snapshots
of the files for production PCB version 1.0 in more easily readable form.
-* [schematic](v1.0/easymini-sch.pdf)
-* [pcb artwork](v1.0/easymini-pcb.pdf)
+* [schematic](v2.0/easymini-sch.pdf)
+* [pcb artwork](v2.0/easymini-pcb.pdf)
+
+## Older Version ##
+
+Easy Mini [version 1.0](v1.0) was largely the same design but used a
+different processor.