@@ -4900,7 +4901,7 @@ motor.
the previous stage has completed providing acceleration, to
minimize drag of the sustainer’s coast phase before ignition.
Recovery, whether the remainder of the flight is nominal or
-not, usually works best when the states are separated. So,
+not, usually works best when the stages are separated. So,
the "best" way to configure a pyro channel for a separation
charge is to just set "after motor number". For a 2-stage
project, set this to "1". This will cause the pyro channel
@@ -5975,7 +5976,7 @@ production and retired.
-
H.1. Release Notes for Version 1.9.16
+
H.1. Release Notes for Version 1.9.17
-
Version 1.9.16
+
Version 1.9.17
H.1.1. AltOS
-
-
Add TeleGPS v3.0 support
+Fix TeleMini v3 Monitor Idle support
+
+-
+
Support TeleMetrum v4.0 with uBlox-10 GPS module
+
+-
+
Improve igniter reporting via the beeper.
@@ -6226,6 +6233,33 @@ production and retired.
+
+
+
+
+
H.2. Release Notes for Version 1.9.16
+
+
+
H.2.1. AltOS
+
+
+-
+
Add TeleGPS v3.0 support
+
+
+
+
+
+
H.2.2. AltosUI & TeleGPS application
+
+
+-
Add TeleGPS v3.0 support
@@ -6234,12 +6268,12 @@ production and retired.
-
H.2. Release Notes for Version 1.9.15
+
H.3. Release Notes for Version 1.9.15
-
H.2.1. AltOS
+
H.3.1. AltOS
-
@@ -6260,12 +6294,12 @@ the tilt computation.
-
H.3. Release Notes for Version 1.9.14
+
H.4. Release Notes for Version 1.9.14
-
H.3.1. AltOS
+
H.4.1. AltOS
-
@@ -6278,12 +6312,12 @@ detects available TeleFire units.
-
H.4. Release Notes for Version 1.9.13
+
H.5. Release Notes for Version 1.9.13
-
H.4.1. AltOS
+
H.5.1. AltOS
-
@@ -6308,7 +6342,7 @@ v3 in a static test stand.
-
H.4.2. AltosUI
+
H.5.2. AltosUI
-
@@ -6321,12 +6355,12 @@ after landing on the beeper.
-
H.5. Release Notes for Version 1.9.12
+
H.6. Release Notes for Version 1.9.12
-
H.5.1. AltOS
+
H.6.1. AltOS
-
@@ -6340,7 +6374,7 @@ crash the board.
-
H.5.2. AltosUI
+
H.6.2. AltosUI
-
@@ -6352,12 +6386,12 @@ crash the board.
-
H.6. Release Notes for Version 1.9.11
+
H.7. Release Notes for Version 1.9.11
-
H.6.1. AltOS
+
H.7.1. AltOS
-
@@ -6374,7 +6408,7 @@ some uses under UK regulations.
-
H.6.2. AltosUI
+
H.7.2. AltosUI
-
@@ -6384,7 +6418,7 @@ some uses under UK regulations.
-
H.6.3. AltosDroid
+
H.7.3. AltosDroid
-
@@ -6399,7 +6433,7 @@ some uses under UK regulations.
-
H.7. Release Notes for Version 1.9.10
+
H.8. Release Notes for Version 1.9.10
@@ -6407,7 +6441,7 @@ some uses under UK regulations.
This release contains a couple of bug fixes for ground station software.
-
H.7.1. AltosUI
+
H.8.1. AltosUI
-
@@ -6418,7 +6452,7 @@ instances of Windows 10.
-
H.7.2. AltosDroid
+
H.8.2. AltosDroid
-
@@ -6435,7 +6469,7 @@ flight data cannot be logged.
-
H.8. Release Notes for Version 1.9.9
+
H.9. Release Notes for Version 1.9.9
@@ -6452,7 +6486,7 @@ channels, recalibrate accelerometers, reset the APRS interval,
adjust the beep tone and reset the pyro time.
-
H.8.1. AltOS
+
H.9.1. AltOS
-
@@ -6475,7 +6509,7 @@ used for controlling the flight.
-
H.8.2. AltosUI
+
H.9.2. AltosUI
-
@@ -6491,12 +6525,12 @@ was broken.
-
H.9. Release Notes for Version 1.9.8
+
H.10. Release Notes for Version 1.9.8
-
H.9.1. AltOS
+
H.10.1. AltOS
-
@@ -6509,7 +6543,7 @@ was broken.
-
H.9.2. AltosUI
+
H.10.2. AltosUI
-
@@ -6522,7 +6556,7 @@ was broken.
-
H.9.3. AltosDroid
+
H.10.3. AltosDroid
-
@@ -6538,7 +6572,7 @@ was broken.
-
H.9.4. MicroPeak GUI
+
H.10.4. MicroPeak GUI
-
@@ -6550,12 +6584,12 @@ was broken.
-
H.10. Release Notes for Version 1.9.7
+
H.11. Release Notes for Version 1.9.7
-
H.10.1. AltOS
+
H.11.1. AltOS
-
@@ -6565,7 +6599,7 @@ was broken.
-
H.10.2. AltosUI
+
H.11.2. AltosUI
-
@@ -6590,7 +6624,7 @@ was broken.
-
H.10.3. AltosDroid
+
H.11.3. AltosDroid
-
@@ -6605,12 +6639,12 @@ was broken.
-
H.11. Release Notes for Version 1.9.6
+
H.12. Release Notes for Version 1.9.6
-
H.11.1. AltOS
+
H.12.1. AltOS
-
@@ -6630,12 +6664,12 @@ horizontally.
-
H.12. Release Notes for Version 1.9.5
+
H.13. Release Notes for Version 1.9.5
-
H.12.1. AltOS
+
H.13.1. AltOS
-
@@ -6667,7 +6701,7 @@ never report as having been fired.
-
H.12.2. AltosUI
+
H.13.2. AltosUI
-
@@ -6697,12 +6731,12 @@ AltosUI packages.
-
H.13. Release Notes for Version 1.9.4
+
H.14. Release Notes for Version 1.9.4
-
H.13.1. AltOS
+
H.14.1. AltOS
-
@@ -6719,7 +6753,7 @@ the device to panic at startup time.
-
H.13.2. AltosUI
+
H.14.2. AltosUI
-
@@ -6732,12 +6766,12 @@ AltosUI packages.
-
H.14. Release Notes for Version 1.9.3
+
H.15. Release Notes for Version 1.9.3
-
H.14.1. AltOS
+
H.15.1. AltOS
-
@@ -6759,7 +6793,7 @@ middle.
-
H.14.2. AltosUI, TeleGPS, MicroPeak
+
H.15.2. AltosUI, TeleGPS, MicroPeak
-
@@ -6778,12 +6812,12 @@ computer erase block size.
-
H.15. Release Notes for Version 1.9.2
+
H.16. Release Notes for Version 1.9.2
-
H.15.1. AltOS
+
H.16.1. AltOS
-
@@ -6796,7 +6830,7 @@ computer erase block size.
-
H.15.2. AltosUI, TeleGPS, MicroPeak
+
H.16.2. AltosUI, TeleGPS, MicroPeak
-
@@ -6806,7 +6840,7 @@ computer erase block size.
-
H.15.3. AltosDroid
+
H.16.3. AltosDroid
-
@@ -6824,12 +6858,12 @@ computer erase block size.
-
H.16. Release Notes for Version 1.9.1
+
H.17. Release Notes for Version 1.9.1
-
H.16.1. AltOS
+
H.17.1. AltOS
-
@@ -6851,7 +6885,7 @@ computer erase block size.
-
H.16.2. AltosUI, TeleGPS, MicroPeak
+
H.17.2. AltosUI, TeleGPS, MicroPeak
-
@@ -6876,12 +6910,12 @@ upgrade. This should avoid the âCOMxx: open failedâ message.
-
H.17. Release Notes for Version 1.9
+
H.18. Release Notes for Version 1.9
-
H.17.1. AltOS
+
H.18.1. AltOS
-
@@ -6897,7 +6931,7 @@ upgrade. This should avoid the âCOMxx: open failedâ message.
-
H.17.2. AltosUI, TeleGPS, MicroPeak
+
H.18.2. AltosUI, TeleGPS, MicroPeak
-
@@ -6912,12 +6946,12 @@ upgrade. This should avoid the âCOMxx: open failedâ message.
-
H.18. Release Notes for Version 1.8.7
+
H.19. Release Notes for Version 1.8.7
-
H.18.1. AltOS
+
H.19.1. AltOS
-
@@ -6927,7 +6961,7 @@ upgrade. This should avoid the âCOMxx: open failedâ message.
-
H.18.2. AltosUI, TeleGPS, MicroPeak
+
H.19.2. AltosUI, TeleGPS, MicroPeak
-
@@ -6969,12 +7003,12 @@ applications will run with Oracle Java.
-
H.19. Release Notes for Version 1.8.6
+
H.20. Release Notes for Version 1.8.6
-
H.19.1. AltOS
+
H.20.1. AltOS
-
@@ -6993,7 +7027,7 @@ applications will run with Oracle Java.
-
H.19.2. AltosUI, TeleGPS
+
H.20.2. AltosUI, TeleGPS
-
@@ -7015,7 +7049,7 @@ applications will run with Oracle Java.
-
H.19.3. MicroPeak
+
H.20.3. MicroPeak
-
@@ -7027,13 +7061,13 @@ applications will run with Oracle Java.
-
H.20. Release Notes for Version 1.8.5
+
H.21. Release Notes for Version 1.8.5
Version 1.8.5 includes fixes to the ground software support
for TeleBT v4, along with a few other minor updates.
-
H.20.1. AltOS
+
H.21.1. AltOS
-
@@ -7043,7 +7077,7 @@ for TeleBT v4, along with a few other minor updates.
-
H.20.2. AltosUI, TeleGPS
+
H.21.2. AltosUI, TeleGPS
-
@@ -7060,12 +7094,12 @@ devices.
-
H.21. Release Notes for Version 1.8.4
+
H.22. Release Notes for Version 1.8.4
Version 1.8.4 includes support for EasyMini version 2.0
-
H.21.1. AltOS
+
H.22.1. AltOS
-
@@ -7077,7 +7111,7 @@ devices.
-
H.22. Release Notes for Version 1.8.3
+
H.23. Release Notes for Version 1.8.3
Version 1.8.3 includes support for TeleMega version 3.0 along
with two important flight computer fixes. This version also
@@ -7086,7 +7120,7 @@ better and some updates to graph presentation and data
downloading.
-
H.22.1. AltOS
+
H.23.1. AltOS
AltOS New Features
@@ -7119,7 +7153,7 @@ from capturing log data.
-
H.22.2. AltosUI and TeleGPS Applications
+
H.23.2. AltosUI and TeleGPS Applications
AltosUI New Features
@@ -7177,7 +7211,7 @@ tilt angle.
-
H.23. Release Notes for Version 1.8.2
+
H.24. Release Notes for Version 1.8.2
Version 1.8.2 includes support for TeleGPS version 2.0 along
with accelerometer recalibration support in AltosUI.
@@ -7187,7 +7221,7 @@ with accelerometer recalibration support in AltosUI.
analyzing saved data files.
-
H.23.1. AltOS
+
H.24.1. AltOS
@@ -7200,7 +7234,7 @@ analyzing saved data files.
-
H.23.2. AltosUI and TeleGPS Applications
+
H.24.2. AltosUI and TeleGPS Applications
AltosUI and TeleGPS New Features
@@ -7229,7 +7263,7 @@ for graphing or KML export.
-
H.24. Release Notes for Version 1.8.1
+
H.25. Release Notes for Version 1.8.1
Version 1.8.1 includes an important bug fix for Apogee Lockout
operation in all flight computers. Anyone using this option
@@ -7250,7 +7284,7 @@ above Mach 1.
analyzing saved data files.
-
H.24.1. AltOS
+
H.25.1. AltOS
@@ -7271,7 +7305,7 @@ deceleration.
-
H.24.2. AltosUI and TeleGPS Applications
+
H.25.2. AltosUI and TeleGPS Applications
@@ -7302,7 +7336,7 @@ broken, so you’d see only the default frequencies.
-
H.25. Release Notes for Version 1.8
+
H.26. Release Notes for Version 1.8
Version 1.8 includes support for our new TeleBT v4.0 ground
station, updates for data analysis in our ground station
@@ -7310,7 +7344,7 @@ software and bug fixes in in the flight software for all our
boards and ground station interfaces.
-
H.25.1. AltOS
+
H.26.1. AltOS
@@ -7323,7 +7357,7 @@ boards and ground station interfaces.
-
H.25.2. AltosUI and TeleGPS Applications
+
H.26.2. AltosUI and TeleGPS Applications
@@ -7356,14 +7390,14 @@ EasyMega. The Y and Z axes were flipped.
-
H.26. Release Notes for Version 1.7
+
H.27. Release Notes for Version 1.7
Version 1.7 includes support for our new TeleMini v3.0
flight computer and bug fixes in in the flight software for all our boards
and ground station interfaces.
-
H.26.1. AltOS
+
H.27.1. AltOS
@@ -7388,7 +7422,7 @@ serviced first.
-
H.26.2. AltosUI and TeleGPS Applications
+
H.27.2. AltosUI and TeleGPS Applications
@@ -7403,7 +7437,7 @@ serviced first.
-
H.27. Release Notes for Version 1.6.8
+
H.28. Release Notes for Version 1.6.8
Version 1.6.8 fixes a TeleMega and TeleMetrum v2.0 bug where
the device could stop logging data and transmitting
@@ -7411,7 +7445,7 @@ telemetry in flight. All TeleMega v1.0, v2.0 and TeleMetrum
v2.0 users should update their flight firmware.
-
H.27.1. AltOS
+
H.28.1. AltOS
@@ -7445,7 +7479,7 @@ they can be tested during production.
-
H.27.2. AltosUI, TeleGPS and AltosDroid Applications
+
H.28.2. AltosUI, TeleGPS and AltosDroid Applications
@@ -7467,7 +7501,7 @@ Ground Station operation by cleaning up pending operations.
-
H.28. Release Notes for Version 1.6.5
+
H.29. Release Notes for Version 1.6.5
Version 1.6.5 fixes a TeleMega and TeleMetrum v2.0 bug where
the device would often stop logging data and transmitting
@@ -7475,7 +7509,7 @@ telemetry in flight. All TeleMega v1.0, v2.0 and TeleMetrum
v2.0 users should update their flight firmware.
-
H.28.1. AltOS
+
H.29.1. AltOS
@@ -7491,7 +7525,7 @@ tested the new firmware before release.
-
H.28.2. AltosUI, TeleGPS and AltosDroid Applications
+
H.29.2. AltosUI, TeleGPS and AltosDroid Applications
@@ -7507,14 +7541,14 @@ Windows package.
-
H.29. Release Notes for Version 1.6.4
+
H.30. Release Notes for Version 1.6.4
Version 1.6.4 fixes a bluetooth communication problem with
TeleBT v1.0 devices, along with some altosui and altosdroid
minor nits. It also now ships firmware for some newer devices.
-
H.29.1. AltOS
+
H.30.1. AltOS
@@ -7534,7 +7568,7 @@ fixes affect all STM32L, STM32F0 and LPC11U14 based devices.
-
H.29.2. AltosUI, TeleGPS and AltosDroid Applications
+
H.30.2. AltosUI, TeleGPS and AltosDroid Applications
AltosUI, TeleGPS and AltosDroid New Features:
@@ -7566,7 +7600,7 @@ active.
-
H.29.3. Documentation
+
H.30.3. Documentation
-
@@ -7581,14 +7615,14 @@ active.
-
H.30. Release Notes for Version 1.6.3
+
H.31. Release Notes for Version 1.6.3
Version 1.6.3 adds idle mode to AltosDroid and has bug fixes
for our host software on desktops, laptops an android devices
along with BlueTooth support for Windows.
-
H.30.1. AltOS
+
H.31.1. AltOS
@@ -7603,7 +7637,7 @@ hardware to driving these pins with software.
-
H.30.2. AltosUI and TeleGPS Applications
+
H.31.2. AltosUI and TeleGPS Applications
AltosUI and TeleGPS New Features:
@@ -7648,7 +7682,7 @@ TeleMetrum v2.0 flight computers.
-
H.30.3. AltosDroid
+
H.31.3. AltosDroid
@@ -7713,7 +7747,7 @@ location of any tracker.
-
H.30.4. Documentation
+
H.31.4. Documentation
-
@@ -7726,14 +7760,14 @@ continuity audio alert pattern.
-
H.31. Release Notes for Version 1.6.2
+
H.32. Release Notes for Version 1.6.2
Version 1.6.2 includes support for our updated TeleMega v2.0
product and bug fixes in in the flight software for all our boards
and ground station interfaces.
-
H.31.1. AltOS
+
H.32.1. AltOS
@@ -7762,7 +7796,7 @@ up.
-
H.31.2. AltosUI and TeleGPS Applications
+
H.32.2. AltosUI and TeleGPS Applications
AltosUI and TeleGPS Fixes:
@@ -7781,7 +7815,7 @@ writing the associated .eeprom file when an error is detected.
-
H.31.3. Documentation
+
H.32.3. Documentation
We spent a bunch of time trying to improve our documentation
@@ -7806,14 +7840,14 @@ duplication of information
-
H.32. Release Notes for Version 1.6.1
+
H.33. Release Notes for Version 1.6.1
Version 1.6.1 includes support for our updated TeleBT v3.0
product and bug fixes in in the flight software for all our boards
and ground station interfaces.
-
H.32.1. AltOS
+
H.33.1. AltOS
@@ -7843,7 +7877,7 @@ variations from transmitting devices.
-
H.32.2. AltosUI and TeleGPS Applications
+
H.33.2. AltosUI and TeleGPS Applications
AltosUI and TeleGPS New Features:
@@ -7908,7 +7942,7 @@ run at 10x speed by mistake.
-
H.32.3. AltosDroid
+
H.33.3. AltosDroid
@@ -7966,14 +8000,14 @@ motion towards rocket.
-
H.33. Release Notes for Version 1.6
+
H.34. Release Notes for Version 1.6
Version 1.6 includes support for our updated TeleDongle v3.0
product and bug fixes in in the flight software for all our boards
and ground station interfaces.
-
H.33.1. AltOS
+
H.34.1. AltOS
@@ -8015,7 +8049,7 @@ you’ll want to reflash the firmware.
-
H.33.2. AltosUI and TeleGPS Applications
+
H.34.2. AltosUI and TeleGPS Applications
AltosUI and TeleGPS New Features
@@ -8090,14 +8124,14 @@ flight computers appear on multiple frequencies by accident.
-
H.34. Release Notes for Version 1.5
+
H.35. Release Notes for Version 1.5
Version 1.5 is a major release. It includes support for our new
EasyMega product, new features and bug fixes in in the flight
software for all our boards and the AltosUI ground station
-
H.34.1. AltOS
+
H.35.1. AltOS
@@ -8156,7 +8190,7 @@ deceleration.
-
H.34.2. AltosUI and TeleGPS Applications
+
H.35.2. AltosUI and TeleGPS Applications
AltosUI and TeleGPS New Features
@@ -8197,13 +8231,13 @@ cases where we just can’t figure out what version is installed.
-
H.35. Release Notes for Version 1.4.2
+
H.36. Release Notes for Version 1.4.2
Version 1.4.2 is a minor release. It fixes Java-related install issues on
Windows
-
H.35.1. AltosUI and TeleGPS Applications
+
H.36.1. AltosUI and TeleGPS Applications
@@ -8222,7 +8256,7 @@ detection fails.
-
H.36. Release Notes for Version 1.4.1
+
H.37. Release Notes for Version 1.4.1
Version 1.4.1 is a minor release. It fixes install issues on
Windows and provides the missing TeleMetrum V2.0 firmware. There
@@ -8232,7 +8266,7 @@ driver, but Mac and Linux users who do not need the TeleMetrum
V2.0 firmware image will not need to upgrade.
-
H.36.1. AltosUI and TeleGPS Applications:
+
H.37.1. AltosUI and TeleGPS Applications:
@@ -8273,14 +8307,14 @@ software, making map downloading fail for most people.
-
H.37. Release Notes for Version 1.4
+
H.38. Release Notes for Version 1.4
Version 1.4 is a major release. It includes support for our new
TeleGPS product, new features and bug fixes in in the flight
software for all our boards and the AltosUI ground station
-
H.37.1. AltOS
+
H.38.1. AltOS
@@ -8335,7 +8369,7 @@ as being present.
-
H.37.2. AltosUI Application
+
H.38.2. AltosUI Application
@@ -8421,7 +8455,7 @@ the product name instead.
-
H.37.3. TeleGPS Application
+
H.38.3. TeleGPS Application
-
@@ -8435,7 +8469,7 @@ to focus on TeleGPS-related functions.
-
H.37.4. Documentation
+
H.38.4. Documentation
@@ -8457,13 +8491,13 @@ configurable amount of time after boost.
-
H.38. Release Notes for Version 1.3.2
+
H.39. Release Notes for Version 1.3.2
Version 1.3.2 is a minor release. It includes small bug fixes for
the TeleMega flight software and AltosUI ground station
-
H.38.1. AltOS
+
H.39.1. AltOS
@@ -8485,7 +8519,7 @@ view and voltages.
-
H.38.2. AltosUI Application
+
H.39.2. AltosUI Application
@@ -8513,13 +8547,13 @@ Igniter dialog.
-
H.39. Release Notes for Version 1.3.1
+
H.40. Release Notes for Version 1.3.1
Version 1.3.1 is a minor release. It improves support for
TeleMega, TeleMetrum v2.0, TeleMini v2.0 and EasyMini.
-
H.39.1. AltOS
+
H.40.1. AltOS
@@ -8561,7 +8595,7 @@ getting re-computed incorrectly in inverted mode.
-
H.39.2. AltosUI Application
+
H.40.2. AltosUI Application
@@ -8597,13 +8631,13 @@ so that all of the map tiles download successfully.
-
H.40. Release Notes for Version 1.3
+
H.41. Release Notes for Version 1.3
Version 1.3 is a major release. It adds support for TeleMega,
TeleMetrum v2.0, TeleMini v2.0 and EasyMini.
-
H.40.1. AltOS
+
H.41.1. AltOS
@@ -8642,7 +8676,7 @@ digital FM transceivers
-
H.40.2. AltosUI Application
+
H.41.2. AltosUI Application
@@ -8678,14 +8712,14 @@ default for new downloads
-
H.41. Release Notes for Version 1.2.1
+
H.42. Release Notes for Version 1.2.1
Version 1.2.1 is a minor release. It adds support for TeleBT and
the AltosDroid application, provides several new features in
AltosUI and fixes some bugs in the AltOS firmware.
-
H.41.1. AltOS
+
H.42.1. AltOS
@@ -8727,7 +8761,7 @@ performance somewhat.
-
H.41.2. AltosUI Application
+
H.42.2. AltosUI Application
AltosUI application new features:
@@ -8784,7 +8818,7 @@ time.
-
H.41.3. AltosDroid
+
H.42.3. AltosDroid
-
@@ -8796,13 +8830,13 @@ time.
-
H.42. Release Notes for Version 1.2
+
H.43. Release Notes for Version 1.2
Version 1.2 is a major release. It adds support for MicroPeak
and the MicroPeak USB adapter.
-
H.42.1. AltOS
+
H.43.1. AltOS
@@ -8818,7 +8852,7 @@ multi-tasking scheduler.
-
H.42.2. AltosUI and MicroPeak Application
+
H.43.2. AltosUI and MicroPeak Application
@@ -8851,7 +8885,7 @@ time.
-
H.43. Release Notes for Version 1.1
+
H.44. Release Notes for Version 1.1
Version 1.1.1 is a bug-fix release. It fixes a couple of bugs
in AltosUI and one firmware bug that affects TeleMetrum
@@ -8860,7 +8894,7 @@ the Google Earth file export issue, and for suggesting the
addition of the Ground Distance value in the Descent tab.
-
H.43.1. AltOS
+
H.44.1. AltOS
@@ -8880,7 +8914,7 @@ of rockets flying version 1.1 firmware.
-
H.43.2. AltosUI
+
H.44.2. AltosUI
@@ -8932,13 +8966,13 @@ deciding whether to fetch the analog sensor data.