X-Git-Url: https://git.gag.com/?a=blobdiff_plain;ds=sidebyside;f=tcl%2Ftarget%2Frsl10.cfg;fp=tcl%2Ftarget%2Frsl10.cfg;h=f4692cc7fea33c6b1caca4dc4488d021c60d1cf6;hb=ca52cfb2b34d684d10e9c91eeb2c6a66a1448b9f;hp=0000000000000000000000000000000000000000;hpb=7dff68f65d93db45954be08967b54251ac9861f8;p=fw%2Fopenocd

diff --git a/tcl/target/rsl10.cfg b/tcl/target/rsl10.cfg
new file mode 100644
index 000000000..f4692cc7f
--- /dev/null
+++ b/tcl/target/rsl10.cfg
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# RSL10: ARM Cortex-M3
+#
+
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	set _CHIPNAME rsl10
+}
+
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x8000
+}
+
+if { [info exists CPUTAPID] } {
+	set _CPUTAPID $CPUTAPID
+} else {
+	set _CPUTAPID 0x2ba01477
+}
+
+swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
+
+$_TARGETNAME configure -work-area-phys 0x200000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+# TODO: configure reset
+# reset_config srst_only srst_nogate connect_assert_srst
+
+$_TARGETNAME configure -event examine-fail rsl10_lock_warning
+
+proc rsl10_check_connection {} {
+    set target [target current]
+    set dap [$target cget -dap]
+
+	set IDR [$dap apreg 0 0xfc]
+	if {$IDR != 0x24770011} {
+		echo "Error: Cannot access RSL10 AP, maybe connection problem!"
+		return 1
+	}
+    return 0
+}
+
+proc rsl10_lock_warning {} {
+    if {[rsl10_check_connection]} {return}
+
+    poll off
+    echo "****** WARNING ******"
+    echo "RSL10 device probably has lock engaged."
+    echo "Debug access is denied."
+    echo "Use 'rsl10 unlock key1 key2 key3 key4' to erase and unlock the device."
+    echo "****** ....... ******"
+    echo ""
+}
+
+flash bank $_CHIPNAME.main rsl10 0x00100000 0x60000 0 0 $_TARGETNAME
+flash bank $_CHIPNAME.nvr1 rsl10 0x00080000 0x800 0 0 $_TARGETNAME
+flash bank $_CHIPNAME.nvr2 rsl10 0x00080800 0x800 0 0 $_TARGETNAME
+flash bank $_CHIPNAME.nvr3 rsl10 0x00081000 0x800 0 0 $_TARGETNAME
+
+# TODO: implement flashing for nvr4
+# flash bank $_CHIPNAME.nvr4 rsl10 0x00081800 0x400 0 0 $_TARGETNAME